Plantronics Voyager 855 User manual

User Guide
Guide de l'utilisateur
BLUETOOTH®HEADSET

2 Plantronics Voyager 855
EN ENGLISH
TABLE OF CONTENTS
Welcome 3
What is Bluetooth? 3
Package Contents & Features 4
Charging 5
Pairing 6
Custom Fit 8
Headset Controls 12
Stereo Headset Controls 13
Indicators 15
Range 15
Hands-Free Features 16
Optional Accessories 17
Troubleshooting 18
Product Specifications 19
Technical Assistance 19
Limited Warranty 19
Important Safety and Operational Information 20
Regulatory Notices 22

3Plantronics Voyager 855
EN ENGLISH
WELCOME
Thank you for choosing the Plantronics Voyager™ 855 headset. To get the
most from your new headset, we recommend that you take the following
steps:
Read this User Guide, including all the safety information at the end of this
guide, before you use your headset.
If you need assistance, please do the following:
Follow the steps in the “Troubleshooting” section on page 18.
Contact the Plantronics Technical Assistance Center at
866-363-BLUE (2583) or visit www.plantronics.com/support.
Visit www.plantronics.com/productregistration to register your headset online,
so we can provide you with the best possible service and technical support.
NOTE: If you are considering returning the product, please contact the Technical
Assistance Center first.
1.
2.
•
•
3.
WHAT IS Bluetooth?
Bluetooth wireless technology provides a way for devices to communicate
with each other using short-range radio frequency instead of wires.
Any two Bluetooth devices can communicate as long as they both have
Bluetooth turned on, they are within range, and they have been paired – a
quick “handshake” that connects the two devices.
Bluetooth range is up to 33 feet (10 meters). Obstructions, such as walls
or other electronic devices, can cause interference or shorten the effective
range. For optimal performance, place your headset and phone on the
same side of your body.

4 Plantronics Voyager 855
EN ENGLISH
PACKAGE CONTENTS & FEATURES
Call control button (on/off)
Mute microphone
(Pause/Play*)
Volume up/down
(Track forward/back*)
Extendable boom
Microphone port
Ear loop stabilizer
Stereo plug-in cable
Noise isolating ear buds
(small, medium and large)
AC charger 100 – 240V
* Stereo mode only and
requires Bluetooth AVRCP
(Audio Video Remote Control
Profile). See “Stereo Headset
Controls” on page 13 for details.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1
4 3
5
6
9
7
2
8

5Plantronics Voyager 855
EN ENGLISH
CHARGING
Before you use your headset for the first time, charge it for at least 1 hour.
It takes approximately 3 hours to fully charge your headset.
Connect the charger cable to the headset.
Plug the charger into a power outlet.
While your headset is charging, the indicator glows red. When your
headset is fully charged, the indicator turns off.
WARNING: Do not use your headset while it is connected to the charger.
CHECK THE CHARGE LEVEL
When your headset is on, simultaneously press and hold the call control
button and the volume down button for about two seconds. The indicator
flashes red to show the charge level.
1.
2.
Red Flashes Battery Level
1 More than 2/3 full
2 1/3 to 2/3 full
3 Less than 1/3 full

6 Plantronics Voyager 855
EN ENGLISH
PAIRING
Pairing is the process of introducing your headset to your phone. Before
using your headset for the first time, you must pair it with your Bluetooth
phone. Normally you need to pair your headset with your phone only once.
To see a demo of the pairing process, visit www.plantronics.com/easytopair.
QUICKPAIR™ TECHNOLOGY
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your headset on, your
headset automatically enters pairing mode for 10 minutes. Once paired
successfully, your headset stays on for instant use.
If not successfully paired after 10 minutes, your headset automatically
powers off. When you turn the headset on again, it automatically goes
into pairing mode until successfully paired with a Bluetooth phone.
To pair your headset for the first time:
Turn ON the Bluetooth feature on your phone.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On.
See your phone’s user guide for more information.
Press and hold the call control button to turn on your headset. (The indicator
flashes red/blue to show that the headset is on and in pairing mode.)
TIP: If you don’t see the red/blue flash, press and hold the call control
button to turn your headset off, and then press and hold the call control
button again until you see the red/blue flash.
Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 8XXPlantronics. See your phone’s user guide for more information.
When prompted for the passkey, enter 0000.
When pairing is successful, the red/blue indicator on your headset turns off.
Your headset is now connected and ready to use.
1.
2.
3.
4.
4
3
2
1

7Plantronics Voyager 855
EN ENGLISH
SUBSEQUENT PAIRING
If you’ve already paired your headset with another device, follow these
steps:
Turn ON the Bluetooth feature on your phone.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
On. See your phone’s user guide for more information.
Turn the headset off by pressing and holding the call control button until the
indicator turns red and then turns off.
Turn the headset back on by pressing and holding the call control button until
the indicator flashes red/blue. The headset remains in pairing mode for 3
minutes.
Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections >
Bluetooth > Search > 8XXPlantronics. See your phone’s user guide
for more information.
When prompted for the passkey, enter 0000.
When pairing is successful, the indicator on your headset turns off. Your
headset is now connected and ready to use.
1.
2.
3.
4.
5.

8 Plantronics Voyager 855
EN ENGLISH
CUSTOM FIT
The Plantronics Voyager 855 headset comes with three sizes of sound
isolating ear buds. We recommend that you try all three ear buds to find
the one that fits snugly in your ear. For added comfort and stability, you
can add the optional small or large ear loop stabilizer.
TIPS:
For optimum performance and a secure and comfortable fit, the headset
should sit snugly in your ear canal with the microphone pointing toward the
corner of your mouth.
If the ear bud is too big or too small, the headset may not stay in your ear, or
you may have difficulty hearing.
PUT ON THE HEADSET
Hold the headset with the boom pointing directly at your cheekbone and the
ear bud placed comfortably in your ear canal.
Gently twist the headset downward while pressing it into your ear canal.
TIP: For optimal voice clarity, point the boom toward the corner of your
mouth. The ear bud should be fully seated to the speaker post to ensure
secure attachment.
WARNING: Select an ear bud that inserts comfortably in the ear canal.
The ear bud should seal but not be forced down the ear canal. If the ear
bud becomes lodged in the ear canal, seek medical attention immediately.
•
•
1.
2.

9Plantronics Voyager 855
EN ENGLISH
CHOOSE AN EAR BUD THAT FITS
When the ear bud fits properly, it should be sealed in your ear so that you
feel a slight amount of resistance when you remove the headset from
your ear.
Remove the headset from your ear.
Gently twist the ear bud while pulling it off the speaker post.
Press a different ear bud onto the speaker post with the stem side of the ear
bud facing downward.
TIP: Try using different size ear buds on the headset and stereo plug-in
cable. Do not assume that you need the same size for both ears.
1.
2.
3.

10 Plantronics Voyager 855
EN ENGLISH
USE THE STEREO PLUG-IN CABLE
You can use the stereo plug-in cable to listen to music in stereo.
Insert the ear loop tab on the stereo cable into the slot on the under side of the
headset until you feel it click into place.
TIP: You can attach the ear loop on either side of your headset, so that you can
wear the headset on your right or left ear.
Drape the stereo plug-in cable across the back of your neck so that the headset
hangs over one shoulder and the stereo ear bud hangs over the other shoulder.
1.
2.
Guide the loop behind your ear. Gently twist the headset downwards while
pressing it into your ear canal.
Gently press the ear bud on the stereo cable inside your other ear canal.
TIP: To remove the stereo plug-in cable from your headset, gently pull
the ear loop straight out of its slot.
3.
4.