Plantronics Voyager Legend User manual

This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
User Guide
Voyager Legend™

2
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Contents
What’s in the box 3
Headset overview 4
Pairing 5
Pair first time 5
Pair another phone 5
Charge 6
Fit 7
Change the eartip 7
Wear on the left or right 7
The basics 8
Make/take/end calls 8
Mute 9
Adjust the volume 9
Use sensors 9
Play or pause streaming audio 9
More features 10
Voice alerts 10
Voice commands 10
Customise your headset 11
Multipoint 11
Specifications 12
Support

3
1 2
3 4 5
6 7
Foam eartip covers and
silicone eartips
USB charge cableHeadset
AC charger
Car charger
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
What’s in the box
1 2
3 4 5
6 7
EURO + UK

4
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Headset overview
voice
Call button
Volume button
Headset LED (indicator light)
Power button
Magnetic charge port
Mute button
Voice button
Play/Pause button
Be safe! Please read the safety guide for important safety, charging,
battery and regulatory information before using your new headset.

5
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Pairing
The first time you switch on your headset it begins the pairing process.
1 Place the headset on your ear and turn it on.
2 While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone
and set it to search for new devices.
 • iPhone:Settings>General>Bluetooth>On
 • Android™Smartphones:Settings>Wireless&Networks>Bluetooth:On>Scanfordevices
 NOTEMenus may vary by device.
3 Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or
accept the connection.
4 Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”
 NOTETo enable caller name announcement, allow access to your contacts if your phone
prompts you.
After pairing your headset to your phone you may want to pair another or new phone.
1 Switch on your headset then choose:
 • TaptheVoicebutton and say “Pair mode,” or
 • PressandholdtheCallbutton untilyouhear“Pairing”
2 While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone
and set it to search for new devices.
3 Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or
accept the connection.
4 Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”
 NOTETo enable caller name announcement, allow access to your contacts if your phone
prompts you.
Pair first time
Pair another phone

6
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Charge
Your new headset has enough power to pair and make a few calls before
charging is needed, though you may charge at any time.
1 Align snap-fit magnetic areas of headset and USB cable.
2 Attach cable to USB wall charger or laptop for 90 minutes. LEDs turn off once fully charged.

7
2
1
3
1
2
2
1
2
2
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Fit
Change the eartip for a better fit.
1 Push in eartip and rotate to the left to unlock it.
2 Align new eartip into slot.
3 Rotate it to the right to lock it into place.
To wear the headset on your other ear, rotate the boom upwards then twist it around so
the eartip is on the other side before lowering the boom.
Change the eartip
Wearontheleftorright

8
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
The Basics
Answeracall
Choose:
 • Placetheheadsetonyoureartoanswercall,or
 • Say“answer”aftercallisannounced,or
 • TaptheCallbutton
 NOTE You can change the voice command language via the MyHeadset™Updater tool. The avail-
able languages are English UK, French, German and Spanish. See Voice Commands for details.
 Answerasecondcall
First, tap the Call button to end current call, then tap the Call button again to answer
new call.
 Endacall
Tap the Call button to end current call.
 Rejectacall
Choose:
 • Takeofftheheadset,or
 • Say“ignore”aftercallisannounced,or
 • PressCallbutton for 2 seconds
 Callbacklastcall
Double-tap the Call button .
 Voicedial(phonefeature)
Press the Call button for 2 seconds, wait for phone prompt and then tell the phone to dial
the name of a stored contact.
Callerannouncement
When wearing your headset, you will hear the name of a contact calling you so you can
decide whether to answer or ignore the call.
An incoming caller name is announced:
 • ifyourphonehasthePhoneBookAccessProle(PBAP)
 • ifyougrantedaccesstoyourcontactsduringpairingprocess
 • iftheyareastoredcontact
Make/take/endcalls
voice

9
However, in the following situations, an incoming caller name is not announced:
 • ifyouusethesensorstoautomaticallyansweracallwhileputtingonyourheadset
 • ifthecallerisunknown,unlisted,orblocked.
During a call, you can mute the microphone.
Tap the Mute button . You will hear “mute on” confirmation. An alert repeats every
15 minutes to remind you of microphone mute. Tap the Mute button again to open the
microphone and hear “mute off” confirmation.
Toggle the Volume button up (+) or down (–) during a call or while streaming audio.
Smart Sensors™technology in this headset recognizes if the headset is being worn and can
automatically perform time-saving functions.
 Puttingonyourheadsetwill:
 • Answeranincomingcall
 • Transferanactivecallfromyourphone
 • Resumestreamingaudio
 Takingoffyourheadsetwill:
 • Rejectanincomingcall
 • Transferanactivecalltoyourphonehandset
 • Pausestreamingaudio
 • LocktheCallbutton to avoid accidental calls
Reset Sensors
You may need to reset the sensors if they are not working as expected.
1Test Wearing the headset, tap the Call button to test sensors. A talk time voice alert
means sensors are working. A tone means sensors need to be reset .
2Reset To reset the sensors, charge your headset and place on a flat non-metallic surface for
more than 10 seconds.
A 2-second press of the Play/Pause button will either pause or resume playback of
streaming audio.
NOTE You must pause your streaming audio before you:
 • use your headset’s voice commands
 • initiate an outbound call via the headset (call back or voice dial)
NOTE If you power-off the headset or go out of phone range while streaming audio,
your headset will not play/pause the stream upon reconnection with your phone until you
manually resume streaming with your phone.
Mute
Adjustthevolume
Use sensors
Playorpause
streaming audio
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.

10
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
More features
Your headset tells you about status changes in English. You can change the voice alert
language by visiting plantronics.com/myheadset and downloading the MyHeadset™
Updater tool. The available languages are Cantonese, English U.K., French, German,
Mandarin and Spanish.
 Voicealertslist
 • “Poweron/off”
 • “Answeringcall”
 • “Talk-time(x)hours”
 • Talk-timelessthan2hours”
 • “Batterylow”
 • “Rechargeheadset”
 • “Phone1disconnected/Phone2disconnected”
 • “Phone1connected/Phone2connected”
 • “Pairing”
 • “Pairingsuccessful”
 • “Pairingincomplete,restartheadset”
 • “Muteon/off”
 • “Volumemaximum/minimum”
 • “Voicerecognitionon/off”
 • “Callingbacklastnumber”
 • “CallbackXYZ”
Tap the Voice button , wait for command request, then say a command. For example,
“What can I say?” tells you the full list of available commands. You can change the
voice command language by visiting plantronics.com/myheadset and downloading the
MyHeadset™Updater tool. The available languages are English U.K., French, German,
and Spanish.
 Voicecommandslist
 • “AmIconnected?”
 • “Answer”
 • “Callinformation”
 • “CallVocalyst”
 • “Cancel”
 • “Checkbattery”
 • “Ignore”
 • “Pairmode”
 • “Redial”
 • “WhatcanIsay”
 NOTE The voice-dial feature on your phone is initiated by pressing the Call button for
2 seconds. The voice-dial feature is not a headset voice command.
Voicealerts
Voicecommands