Plantronics Calisto P830 User manual

Getting started:
Follow the steps below to get call answer/end controls
with your Calisto speakerphone and Cisco® Unified
Communications Integration for Cisco WebEx
Connect®.
1. Connect your speakerphone to the computer.
If this is the first time you are connecting, wait
for the installation process to complete.
2. To get call control features, please download
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Cisco Unified Communications Integration
for Cisco WebEx Connect to always route call audio to
the speakerphone:
3. Click Edit in the upper left corner of the Cisco
WebEx Connect main screen.
4. Then select Settings.
5. Next choose Audio/Video.
6. Select your Plantronics speakerphone in the
drop down for both Speakers and Microphone.
7. You can also adjust the Speakers and
Microphone volume in this screen.
8. When you are finished, select Save.
Note: USB configuration settings are unique for each USB
port. If you connect the speakerphone to a different port
you will need to make these changes again to set
behavior for that USB port.
Calisto®P830™Quick Setup Guide
Welcome:
Using a Plantronics Calisto speakerphone
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer’s internal microphone and
speaker.
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Calisto and P830 are trademarks or registered trademarks of Plantronics, Inc. Cisco and Cisco WebEx Connect are trademarks of Cisco Systems Inc. and/or its affiliates in the U.S. and
other countries. Published 10.11
3
4
5
6
6
Calisto P830 Key Features:
Seamlessly switches between calls
from PC, mobile and home landline
Color display and touch sensitive keys
for intuitive visual call management
Full duplex wideband audio support
and advanced noise cancellation
User friendly Caller ID and call log
8

Making and Receiving Calls with Cisco Unified Communications Integration for Cisco WebEx Connect
To MAKE a call:
To call an existing contact, select the
Contact Tabs (1) and select the contact
you would like to call. Right click on their
picture (2), select Start Call (3) and
choose a number (4).
You can also enter a phone number
manually using the dial pad on the
speakerphone or the search box located
near the top of the Cisco WebEx Connect
main screen (5).
When a call is placed, a call notification
will appear in the Cisco WebEx Connect
main screen, and the audio will be
routed to your speakerphone.
To RECEIVE a call:
When you receive a call, a notification
window will appear in the lower right
corner of your computer screen (6).
To answer the call, use the controls on
your speakerphone or click the green
Answer button (7) in the call notification
window.
1
4
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Calisto and P830 are trademarks or registered trademarks of Plantronics, Inc. Cisco and Cisco WebEx Connect are trademarks of Cisco Systems Inc. and/or its affiliates in the U.S. and
other countries. Published 10.11
2
3
4
6
7
5
1