Plasma Ions PS-501TV User manual

【Technical Specification】
Product
Name
Purchase
Time
Product
Number
Contact
Number
Customer
information
Name/company
contact address
Sales company stamp：
UV Lamp
quantity
PS-501TV
24V DC
2
50~80m
≤50dB
300*104*402mm
50 W
0~138m³/h
3.0 Kg
1（Standard）
180mm(7.0inch）
High efficiency filter*2
1（Standard）
Material Aluminium alloy
Model
Voltage
Noise
Size
Filter type
Power
Air volume
Weight
Ion tube
quantity
Ion tube size
Ion tube life
WarrantyCard
Please keep itproperly
Pleasereadtheinstructionsbeforeuse
Plasma Air Disinfection Purifier
Model: PS-501TV
Plasma Ions
Application
Area
17000 Hours
【Method of Operation】
1. Turn on the power after connecting the power, the main switch is at the connection between
the power cord and the machine, turn on the switch indicator Lights up, indicating that the
machine has entered operation and the fan is working.
2. Adjust the air volume, 0~138 m³/h.
3. According to the actual pollution situation of the user's pollution source, the controllable ion
generation quantity can be adjusted, "0" means no ion generation, "1" means that the plasma
starts to work and "3" means maximum.(Ion concentration adjustment function is optional)
Wind speed adjustment
switch(standard)
Ion quantity control
system (optional)

Plasma ions generator play a long-lasting and active positive and negative ion
purification effect.
Shell is made of aluminum alloy。
This product can be used for a long-term.(Suggest clean the ion tube about 12
months later, clean or change the filter)
Plasma generator
is not working
Power and other
indicator signals
are not lit
Check if the power cords securely inserted into the unit and
it is loose. Check the power outlet for power supply and check
the 2.0 A standard (certified) fuse
Under normal circumstances, there is a slight electric current,
and there is a faint blue light in dark places. If foundThe ion
tube bursts, and the ion tube needs to be replaced.
Please send the following to the company's designated
maintenance department for repairs.
1. The problem cannot be solved as described above.
2. Foreign matter or moisture enters, and abnormal conditions occur.
Fault condition Processing check
This machine is designed for only indoor general using. Do not place it open-air or high
temperature place.
Before operating the machine, make sure the power cord is firmly plugged into the power
outlet, and place the power cord in a safe position. Do not touch, install or unplug the
power cord with wet hands to avoid electric shock accidents.
Before unplugging the power cord, please turn off the machine power in the correct
procedure, otherwise it may cause damage to the machine.
If don't use the machine for a long time, please unplug the power supply.
Before operation, please check whether the air inlet and outlet positions of the machine
are blocked.
Do not put debris at the air inlet or outlet, because there is the fan installed inside with
high-speed rotation, it may caused injured if touch it.
In order to ensure the best performance of the machine, do not place any obstacles within
1 meter nearby of the air outlet position and air introduction position.
The machine has precision components built inside. Don't open the case by yourself to
avoid damage to the machine parts and may happen dangerous.
Do not dismantle the front wind panel or the chassis during machine is operating to avoid
dangerous.
Pay attention to ventilation when using it together with fuel appliances. Please do not use
machine in the kitchen.
Before cleaning the chassis of the machine, make sure turn off the power and unplug it of
the machine.Only use cloth with a little clean water and clean it softly,don't use volatile
cleaners.
Forbidding to place and using in the bathroom, otherwise it may cause electric shock.
There are electronic devices installed inside, do not open the case to avoid the risk of electric shock.
Please read this [user manual] carefully before using the machine and follow the below points of
operation base on the manual.Otherwise It may cause damage to product, or even cause injury
to yourself or others at varying degrees.
1.Please read this manual carefully before use.
2.Free services can be provided with warranty card and invoice,welcome to contact us
if you need technical support.
3.Customers can get 1 year warranty service from us with product related invoice and
documents.
4.Please keep the warranty card properly so that the warranty can be obtained when
the product needs repair.
5.The company is not responsible for the following repair services beyond the product,
but we can still provide you with paid services.
Products due to improper use or storage.
Products without warranty card or other valid documents.
Products due to unstable power supply voltage or beyond the normal voltage
range or power supply and installation does not meet the electrical installation
requirements.
Promotional products.
Products damaged caused by irresistible natural disasters.
Products beyond maintenance period,damaged due to not follow the rules and
methods of application.
(1）product description：
(2）Dimension parameter：
Widely used in hospital、 nursing room、ambulance、office、household areas.
Handle
(Removable)
Safety switch
Fuse(2A)
Fan
Ion quantity control
system(Optional)
High efficiency filter
Installation
fixing hole
Screw foot pad
(Removable)
High efficiency filter
UV lamp
UV lamp
powersupply
Wind speed
regulating switch
Ion tube power
supply
Plasma tube
300mm
360mm 42mm
104mm
Air inlet
Air outlet
DC24V Power Connector
Switch
Work indicator
【FaultCheck】
【Precautions】【MaintenanceNotice】【CompositionUnit】
【Useand Characteristics】