Playskool Busy Go & Grow Giraffe 09392 User manual

OVER 12 Months
09392
Busy Go & Grow Giraffe™
Thank you for choosing this PLAYSKOOL toy!
ADULT ASSEMBLY
REQUIRED.
Tool needed: Phillips/
cross head screwdriver
(not included).
INCLUDES giraffe body,
front legs (2 pieces),
back legs (2 pieces),
2 (red plastic) connector
plugs, 2 handles, 1 tail/back
handle and 8 screws.
CAUTION:
This product contains small parts which are necessary for assembly. Prior
to and during assembly of this product, keep small parts out of children’s
reach. Small parts pose a choke hazard to children under 3 years.
MAXIMUM WEIGHT 42 LBS. (19 KGS.)
TM

ASSEMBLY
1. Turn the giraffe body
on its right side. Locate
and remove the label
that indicates where the
connector plug should be
inserted.
PLEASE NOTE: This is a one-time assembly.
giraffe body
front leg
8 screws
2 handles
tail/back
handle
front legback leg
back leg
2 connector
plugs
screw hole screw hole
2. Take one red
connector
plug and insert it into
the small oval slot on the
giraffe as shown, making
sure to align it with the
circular screw holes. Press
into place.
connector plug

7. Take the tail/back handle
and align so that the screws
face the back of the giraffe
head. Press down firmly until
the tail/back handle snaps
into place.
3. Take the front leg piece (marked “1”) and
align with the section marked “1” on the
giraffe body.
Slide the leg piece over the side lip of the
connector plug and firmly press into place
on the area of the spots (you should hear
audible snaps).
Affix 2 screws into place as shown
4. Take the back leg piece (marked “2”) and align
with the section marked “2” on the giraffe
body.
Slide the leg piece over the side lip of the
connector plug and firmly press into place
on the area of the spots (you should hear
audible snaps).
Affix 2 screws into place as shown.
5. Turn the giraffe body onto its left side.
Remove label, install connector plug, and then
repeat steps 3 and 4 on the left side with
the front leg (marked “4”) and the back leg
(marked “3”).
2
1
tail/back handle
4
3
handle
6. Align the notched part of
one handle with the round
opening on the giraffe
head so that it interlocks as
shown, and push into place.
Repeat on the opposite side.
handle

7HRHS
7HRHS
BNLBNL
© 2007 Hasbro.
All Rights Reserved.
TM & ® denote U.S. Trademarks.
Patent Pending.
09392 PN 6691320000
PLAY FEATURES
With the BUSY GO & GROW GIRAFFE, you and your baby have two ways
to play together.
Position your baby so that she’s facing
forward, straddling the giraffe body
with her feet resting on the base, and
holding on to the handles. Gently rock
her to get her into the rhythm. You’ll
both have fun as you encourage your
little one to discover the sensation
of rocking! The giraffe ears crinkle
and squeak—adding more sensory
stimulation for your baby.
Position your baby so that she’s
facing backward and her legs
straddle the tail/back handle. She’s
in the perfect position for you to
tickle her toes and engage her in
fun activities!
Facing Backward
Facing Forward
BEFORE YOU PLAY: Double check to make sure there are no gaps between
the giraffe body and the giraffe legs. If there are any gaps, press again
until you hear audible snaps.