pleasant hearth FA617S User manual

1
ATTICUS FIREPLACE SCREEN
MODEL #FA617S
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Español p. 7
Français p. 13
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday, or email
us at [email protected].
40-10-235 Rev. 07/30/2020

2
A
B
C
PACKAGE CONTENTS
A
B
C
PART DESCRIPTION QUANTITY
AScreen Frame 1
BFront Foot 2
CBack Foot 2

3
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-877-447-4768, 8:00 a.m. – 4:30 p.m. CST, Monday – Friday.
SAFETY INFORMATION
WARNING
• Do not allow children to play with or around screen.
• Do not attempt to clean the screen while it is hot.
• When screen is in use, do not touch with bare hands as hot particles may stick to surface of screen.
• Make sure screen is large enough to completely cover replace opening.
• Use heat-resistant replace gloves when moving or adjusting screen.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
HARDWARE CONTENTS
AA BB
M6 x 12 mm Bolt
Qty. 4
M6 x 20 mm Bolt
Qty. 2
Tools Required for Assembly (not included)
Phillips screwdriver.
Preassembled
on back foot

4
M6 x 12mm Bolt
M6 x 20 mm Bolt
1
2
AA
BB
x4
x2
ASSEMBLY INSTRUCTIONS
1. Attach foot (B) to screen frame (A) on one side
by inserting 2 bolts (AA) through predrilled holes
in the foot (B) and through the screen frame (A).
Tighten with screwdriver. Repeat on opposite side.
2. Remove the M6 x 20 screw (CC) from one of the back
feet (C). Attach the back foot (C) to the back side of the
screen (A) by inserting the same M6 x 20 screw (BB) in
each foot (C), as illustrated in Figure 2. Adjust the feet to
the desired width. Tighten against the screen (A).
Note: The back feet are designed to adjust to the inside
width of your replace opening so that, if desired, the
screen can be placed ush against the replace.
Hardware Used
Hardware Used
AA
A
A
B
CBB

5
CARE AND MAINTENANCE
1-YEAR LIMITED FRAME WARRANTY
If within one year from the date of original purchase, this item fails due to a defect in material or
workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain
warranty service, call 1-877-447-4786, Monday – Friday, 8:00 a.m. – 4:30 p.m. CST. This warranty
does not cover defects resulting from improper or abnormal use, misuse, accident, or alteration.
Failure to follow all instructions in the owner’s manual will also void this warranty. The manufacturer
will not be liable for incidental or consequential damages, or common erosion of outdoor products.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation may not apply to you. This warranty gives you specic legal rights, and you may also
have other rights which vary from state to state.
GHP Group Inc.
6440 W. Howard St.
Niles, IL 60714-3302
877-447-4768
• Do not attempt to clean screen while it is hot.
• Wipe it with a soft cloth.
• Store in a clean, dry place.
• Do not use abrasive cleaners as they may cause parts to tarnish or rust.

6
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department 1-877-447-4768, 8:00 a.m. – 4:30p.m.,
CST, Monday – Friday.
PART DESCRIPTION PART #
AScreen Frame 40-10-168
BFront Foot 40-10-169
CBack Foot 40-01-694
AA M6 x 12 mm Bolt 40-09-506
BB M6 x 20 mm Bolt 40-09-143
N/A Instruction Manual 40-10-235
Printed in China
A
B
C
A
B
C
AA BB

7
PANTALLA PARA CHIMENEA ATTICUS
MODELO #FA617S English p. 1
Français p. 13
40-10-235 Rev. 07/30/2020
¿Preguntas, problemas, piezas faltantes?
Antes de volver a la tienda, llame a nuestro departamento de servicio al cliente al 1-877-447-4768,
de lunes a viernes de 8:00 a.m. a 4:30 p.m., hora central estándar o envíenos un correo electrónico
a [email protected].
ADJUNTE SU RECIBO AQUÍ
Número de serie Fecha de compra

8
CONTENIDO DEL PAQUETE
A
B
C
A
B
C
PIEZA DESCRIPCIÓN CANTIDAD
APantalla 1
BPie frontal 2
CPie trasero 2

9
ADITAMENTOS
PREPARACIÓN
Piezas con la lista del contenido del paquete y la lista de aditamentos. No intente ensamblar el
producto si falta alguna Pieza o si estas están dañadas. Póngase en contacto con el departamento
de servicio al cliente para obtener piezas de repuesto.
Tiempo estimado de ensamblaje: 5 minutos
Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto.
Si tiene alguna pregunta con respecto al producto, llame a nuestro Departamento de Servicio al
Cliente al 1-877-447-4768, de lunes a viernes de 8:00 a.m. a 4:30 p.m., hora central estándar.
INFORMACIÓN DE SEGURIDAD
ADVERTENCIA
• No permita que los niños jueguen con las herramientas o cerca de ellas.
• No trate de limpiar las herramientas mientras están calientes.
• Las partículas calientes pueden adherirse a la supercie de las herramientas.
• Asegúre que la pantalla es sucientemente grande para cubrir completamente la abertura de la chimenea.
• Utilizar guantes de chimenea resistentes al calor cuando se mueva o ajuste la pantalla.
AA BB
Perno M6 x 12 mm
Cant. 4
Perno M6 x 20 mm
Cant. 2
HERRAMIENTAS REQUERIDAS PARA EL ENSAMBLAJE (no incluidas)
Destornillador Phillips.
Premontado en
el pie trasero

10
INSTRUCCIONES DE ENSAMBLAJE
Perno M6 x 12mm
Perno M6 x 20 mm
1
2
AA
BB
x4
x2
1. Fije la pata (B) a la estructura de la pantalla (A)
en un lado insertando 2 pernos (AA) a través de
los oricios taladrados previamente en la pata (B)
y a través de la estructura de la pantalla (A).
Ajuste con rmeza con un destornillador.
Repita para el lado opuesto.
2. Retire el tornillo M6 x 20 (CC) de una de las pa-tas
traseras (C). Fije la pata posterior (C) a la parte trasera
de la pantalla (A) insertando el mismo tornillo M6 x 20
(BB) en cada pata (C), como se muestra en la gura
2. Ajuste las patas según el ancho deseado. Ajústelas
contra la pantalla (A).
Nota: Las patas posteriores están diseñadas para
ajustarse al ancho interior de la abertura de su hogar, de
modo que, si lo desea, la pantalla se puede colocar al
ras del hogar.
Aditamentos utilizados
Aditamentos utilizados
AA
A
A
B
CBB