Polar Electro Breeze Deluxe User manual

Polar Breeze Deluxe Instruction Manual
Thank you for purchasing this unit. Please read these instructions carefully prior to usage. Please
keep these instructions safe for future use.
IMPORTANT WARNINGS
WARNING : When using electrical appliances, basic safety precautions should be followed
to reduce the risk of fire, electrical shock and personal injury.
1. Use this cooler only as described in this manual. Other use is not
recommended electric shock or injury to others. This will also void your
warranty.
2. A l ways operate the prod u ct f ro m a power source of the same vo l tage,
frequency and rating as indicated on the rating label.
3. This product is intended for indoor, household use ONLY. Do not use
outdoors or for commercial or industrial purposes.
4. To protect against electric shock: do not immerse unit, plugor cord in
water or spray with liquid; do not place unit on windowsills or other
places where it may beexposed to dripping or splashing water; do not
place vases or similar objects.
5. Do not use this product in the immediate vicinity of water, such as
bathtubs, washbowls, swimming pools etc. where the likelihood of
immersion or splash could occur.
6. To reduce the risk of fire or electric shock, do not use this product
with any solid-state speed control device.
7. This appliance is not intended for use by persons ( including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
8. This product is not a toy! Children should be supervised to ensure that they
do not play with the appliance.
9. Turn the unit OFF when unplugging from the outlet and not in use. When moving
the unit from one location to another, fully assemble the unit before switching on
again.
10. To disconnect the unit, first turn it OFF, grip the plug and pull it from the wall outlet.
Never pull the plug by the c ord.
11. Do not operate the cooler in the presence of e plosive and/or flammable fumes.
12. Do not place the product or any parts near an open flame, cooking or other heating
appliance.

13. Do not operate product with a damaged cord or plug, or if the product malfunctions,
or is dropped or damaged in any manner.
14. Avoid contact with moving parts. Do not insert any body parts (e.g. finger) or objects
through the grill while the unit is operating.
15. The use of attachments not recommended by the manufacturer may be hazardous
16. Place the unit on a dry level surface to avoid overturning.
17. Do not operate if the product housing is damaged.
18. Do not cover the grill, or operate in close proximity to curtains, etc.
Ensure adequate ventilation around the unit.
19. A loose fit between the AC outlet (receptacle) and plug may c ause
overheating a nd a distortion of the plug. Contact a qualified
technician to replace loose or worn outlet.
20. If the supplied cord is damaged, it must be replaced by the manufacturer,
its service agent or qualified person in order to avoid hazard.
21. If the product is not working properly, contact a qualified technician for
examination and repair. Never attempt to dismantle the unit
yourself.
22. Never install or store the unit where it could be subject to:
• Heat sources such as radiators, heat registers, stoves or other
products
▪ that produce heat
▪ Direct sunlight
▪ Mechanical vibration or shock
▪ Excessive dust
▪ Lack of ventilation, such a s a cabinet or bookcase
▪ Uneven surfaces
23. Do not leave the product running unattended.
24. The castor wheels must be attached before use.
25. Do not remove the water tank while the unit is plugged in.

How to use remote Control
1. For first time use, please insert 2 x AAA batteries.
2. The range of the remote control is 5 metres from the unit and 30 degrees of deviation.
3. When not in use for long period, always remove the battery from the remote.
Specifications
Note: A s a result of continuous improvements, the design and specifications of the product within may differ slightly
from the unit illustrated on the packaging.
Control Panel and Manual Operation
ON/OFF (Stand-by) Key:
When the unit is connected to the power source, it Automatically goes to standby mode.
Press the “ON/OFF” button manually or use the remote control to switch ON and OFF the unit.
To Shutdown the unit, remove the connector from the power source.
Speed Key:
When the unit is switched “ON”, the fan is pre-set to Medium speed and changed to Low after 3
seconds. Continue pressing the key to set the speed of your fan. Indicator is displayed to show
current setting.

COOL KEY:
Before using this feature, make sure to add cool water in the tank. For better result, add the ice
block provided and cool water together.
Note:The Ice Blocks are supplied empty; add water and freeze for few hours before use
Press the Key and the light indication will turn “ON”. Evaporative cooling system will be now active.
SWING KEY:
Press this key to have the air vent sway Left to Right automatically. Indicator will turn ON.
120 degrees Air Flow.
TIMER:
Set Timer to preference, which can be selected from 0.5 –7.5hrs. Each press of timer key will add
0.5hrs. Setting time is accumulated by the time specified by the light indicator.
MODE KEY:
Select between 3 modes;
-NORMAL –Consistent air flow with desired fan speed
-Natural –Provides nature like Coolness with programmed fan speed
-Sleep –Lower noise, programmed fan speed, Air filtering
WATER TANK:
Warning: Unplug the unit from the main supply before removing the water tank.
• When unit or the Cool function is not in use for period of time, empty the
wate r fr om the ta n k.
• U se mild soa p a n d water to cl ea n the Water Ta n k.
• Allow it to air dry or wipe dry using a soft cloth. Make sure the Water Tank is
completely dry before replacing. This helps prevent any mould or mildew inside
the Water Tank.
• E mpty the water and dry out the ice blocks before storage.
Make sure the Air Inlet Cover and Water Tank are replaced in position before
switching on.

CLEANING AND MAINTENANCE:
Caution:
• Always switch off and unplug the unit before removing the filters or
performing any cleaning.
• Do not use harsh detergents, chemical cleaners or solvents as they may
damage the surface finish of the plastic components.
MAIN BODY
1. Use a soft duster or a rag to dust off all the sur faces.
2. Clean the Air Inlet and Air Out let using a vacuum cleaner regularly.
3. Wipe all the parts with a soft damp (not wet) cloth dipped in mild soapy water.
Caution: Ensure that water doesn't get inside the unit.
4. Use a dry cloth to thoroughly dry the unit before turning on.
AIR INLET COVER AND INNER FILTER:
1. Remove the Air Inlet Cover and wipe clean, or clean using a vacuum cleaner.
2. Use a duster to gently by dusting off the Inner Filter.
3. Replace the Inner Filter and Air Inlet Cove in correct position
ASSEMBLY
Note: The 4 x Castor Wheels must be installed before using this Cooler.
1. Spread a soft cloth or mat on a level floor. Carefully place the unit upside
down on the soft cloth or mat
2. Insert each Castor Wheel into the hole on the bottom of the machine
and thread it in clockwise. Tighten with the provided wrench to
secure into position. Repeat for all four Castor Wheels.
FILLING THE WATER TANK:
before use, follow the procedure explained below to fill the water tank with clean,
cold water. Do not fill the water past the 'MAX' level indicate.
WARNING: Unplug the unit from the main supply before removing
the water tank

Important:
• Do not use water with any chemical a dditive s . The water must be cold
or cool, do not use hot water a bove 40'C.
• Do not fill water a bove the ' MAX ' line indicated on the Water Ta nk.
Maintenance and care
If proper care is not taken, filters may be infested with fungus and moulds. For maintenance of the
product, you MUST clean the filter and water tank in dry area before long term storage.
It is always recommended to regularly clean the filter and the water tank for healthier usage.
Make sure to clean the filter when you see signs with musty ordo and mould build ups in the filter.
Preventing mould build ups in the Evaporative Cooler
Always check the Humidity level, as the Evaporative cooler is most effective on dry areas.
Running evaporative cooler mode on humid days will prevent evaporation through the cooling pad
causing higher chance of mould build ups.
Tips to Clean the filter?
Remove the filter (cooling Pad) from the unit and submerge the filter into a mixture of lemon Juice
and water for 40 Seconds. Gently with soft brush remove the mould, then in clean running water,
Rinse the filter. Leave the filter to be completely dry before usage.
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.