01/2020
Find product support
http://support.polar.com/en/H10
Compatible with
1.
3.
2.
MANUFACTURED BY
POLAR ELECTRO OY
PROFESSORINTIE 5
90440 KEMPELE
FINLAND
WWW.POLAR.COM
4.
Getting Started Guide
POLAR H9
POLAR H10
Thanks for choosing Polar! In this guide we’ll walk you through the basics of
using H9/H10 heart rate sensor.
You can download the full-length user manual and the latest version of
this guide at support.polar.com. For more help, there are some great video
tutorials you may want to check out.
Wearing the heart rate sensor
1. Moisten the electrode area of the strap (picture 1).
2. Fastenthestraparoundyourchestandadjustthestraptotsnugly.
3. Attach the connector (picture 2).
After training, detach the connector and rinse the strap
under running water to keep it clean.
Getting started
YoucanuseyourPolarH9/H10withdozensofleadingtnessapps
including Polar Beat, as well as with many Polar products and ANT+
devices. Check all the compatible products and devices at
support.polar.com.
To get started with your H9/H10, please pair it with the app or the Polar
productrst.Formoredetailedinstructions,seethetheappmanufacturer’s
manual or the user guide of your Polar product.
With H10 you can record a training session also with the sensor alone. The
recording can be started from the Polar Beat app.
Please note that the heart rate signal your H9/H10 sends doesn’t pass
through the human body. Therefore you shouldn’t keep the receiving device
in a backpack, for example, but somewhere in front of you.
By default, H9/H10 sends your HR signal also via
ANT+. You can turn it off from the Polar Beat settings, if
you want.
Caring for your heart rate sensor
Connector: To preserve battery life and prevent snap oxidation, detach the
connector from the strap after every use and wipe it dry with a soft towel.
Strap: Rinse under running water after every use. Wash regularly. Check the
label on your strap for detailed washing instructions.
Remember, the strap doesn’t last forever; it wears out like any other
garment you wear and wash regularly.
Changing the battery is easy
1. Lever the battery cover open by using a small flat-headed tool.
(picture 3).
2. Remove the old battery from the battery cover.
3. Insert the new battery (CR2025) inside the cover with the negative (-)
side outwards.
4. Align the ledge on the battery cover with the slot on the connector and
press the battery cover back into place (picture 4). You should hear a
snap.
For safety reasons, please make sure you use the cor-
rect battery (CR2025).
Information about materials is available in the user manuals at
support.polar.com/en/H9 and support.polar.com/en/H10.
The radio equipment operates 2.402 - 2.480 GHz ISM frequency band(s)
and 6.9 mW maximum power.
http://support.polar.com/en/H9
GymLink
