Polycom SoundStation IP 3000 Instruction Manual

Page 1 of 3 3810-07199-001 REV 2.0
Release Notes: SoundStation IP 3000 – 3Com NBX
Current Software Revision
R1_3_0 (TP2_R1_3_0.taz)
Required NBX®Software Revision:
4.0.10 (or later)
Important Note: NBX NetSet utility
Users and/or administrators familiar with the NetSet utility should be aware of the
following limitations.
Administrators:
•Assigning Button Mappings to the device is not supported. The phone has
no programmable buttons.
•Assigning IP addresses to the device using NetSet, is not supported. Use
the menu on the phone instead to set its IP address if necessary.
Users:
•Personal speed dials defined using NetSet, are not available from the
phone. Use the local speed dial features on the phone instead.

Page 2 of 3 3810-07199-001 REV 2.0
Known issues
The following problems are known to exist and will be addressed in a future SW
Release.
Issue # Description Workaround
00057 Phone cannot receive internal pages. None.

Page 3 of 3 3810-07199-001 REV 2.0
Change History
Fixes contained in Release R1_3_0
Issue # Description
01396 The phone does not process Option 184 information correctly in an
environment where the NCP address is supplied using DHCP.
Fixes contained in Release X1_2_0
Issue # Description
01106 Phone locks up after IP call completed when in IP on the Fly mode.
When the NBX system is running in IP on the Fly mode, the Polycom
phone is able to make a call to an IP phone (and or VTL call), however
when the call is ended the Polycom phone locks up.
NOTE: The above bug only occurs when the Polycom phone is installed
as Layer 2 with respect to the system NCP. Bug doesn't occur when
installed as L3 device.
01208 Phone cannot be upgraded when installed as a Layer 3 device.
00923 In standard IP mode, the phone is not reporting a correct IP address to
the NCP