POSIFLEX RT-2015E User manual

1
Package Contents
RT-2015E 15” fanless touch terminal or
RT-2016E 15.6” fanless touch terminal…..x1
Power adapter……………………………..x1
Power cord………………………………...x1
User manual……………………………….x1
Screw for back cover……………………...x1
Views of RT-2015E/2016E
Front View
15” RT-2015E
15.6” RT-2016E
Rear View
RT-2015E/2016E
Fanless Touch POS Terminal
User Manual
P-Cap Touch Panel
LED indicator
LED indicator
Camera (Optional)
System Back Cover
Attachment Bay
Wall- Mount
Screw Hole
16950902010 Ver. A0
http://www.posiflex.com

2
Bottom View
Right-Side View
Left-Side View
Release Lever for System Back Cover
Brightness Adjustment Button ＋
Power Button
Brightness Adjustment Button －
Rubber Shield for USB2.0 Port
Screw Hole

3
View of I/O Interface of RT-2015E/2016E
Bottom Side
Left Side
Connecting Power Adapter and Cables
The following provides instructions required to connect your cables.
1. To remove the back cover, hold down the
release levers at the bottom of the system
back cover and then pulling the cover
outwards.
2. Connect the connector of the power adapter to
the DC-IN power jack. If necessary, properly
insert other cables into the correct ports.
24V PoweredUSB Port
DB9 COM Port
CR Port
LAN Port
DC IN Power Connector
Mini DisplayPort
RJ50 COM Ports
USB 2.0 Ports
USB 2.0 Port
USB 3.0 Port

4
3. Neatly arrange the cables along the cable slots.
4. Place back the sytem back cover. Make sure it
is well locked into place with a click sound.
5. Make sure the cable could be pulled out of the cable exit from the bottom
of the base.
6. Locate the dedicated back cover screw from the
packing box. Then, please insert the screwinto
the screw hole indicated in the figure, and secure
it.
Installing Optional Upgrade Kits and Peripherals
RT-2015E/2016E is an expandable model which allows you to upgrade its own
capacity by additionally installing multiple peripheral devices, such as
magnetic stripe reader (MSR), fingerprint or iButton sensors, and 2nd POS
monitor, according to your preference. The following will give you brief
instructions on how to expand on your current POS system with these optional
upgrade kits. Before proceeding with the installation of peripherals, please
make sure the POS system is completely shut down to prevent damage.

5
Status LED Indicator
LED status indicator, which is located at the bottom edge of the LCD panel, is
mainly responsible for notifying users of the current system status by emitting
various LED signals. In the chart provided below, it describes all the possible
LED status as a quick reference.
15” RT-2015E
LED Status
Description
Off
System power OFF
Green
System standby
Blue
System power ON
15.6” RT-2016E
LED Status
Description
Off
System power OFF
Orange
System standby
Blue
System power ON
Powering ON/OFF RT-2015E/2016E
Power ON RT-2015E/2016E
Press down the power button to power on the POS.
Power OFF RT-2015E/2016E
In most cases, press the power button of the POS to power
the system off. If the terminal fails to turn off the machine
for unknown reasons, please be advised to hold the power
button more than 10 seconds to force a shutdown of the
system.
Installing an Operating System
You are highly advised not to install an operating system on
RT-2015E/2016E without professional instructions. Improper installation
could lead to system malfunction or failure. Please contact with your dealers
about the issues of operating system installation.
Power
Button

6
Performing System Recovery
For RT-2015E/2016E model with preloaded operating systems, Recovery
DVD which includes useful utilities will be provided in the package to assist
you in efficiently restoring or repairing your damaged system. However, you
are not encouraged to recover your system without the help of system
integrators. Please be advised to contact your service center for further
assistance with system recovery.
Operation Environment
To prevent RT-2015E/2016E from overheating, it is suggested to position your
terminal in a well-ventilated working environment. In doing so, please be
advised to keep the POS terminal at least 25mm away from other devices to
ensure the machine is properly cooled down and functioning normally.

7
Specifications
RT-2015E
RT-2016E
CPU
Intel Bay Trail-D
Intel Celeron - J1900 (2.0 GHz, QC, 10W TDP)
System Memory
1 x DDR3L SO-DIMM
Storage Port
2 x S-ATA port
Power Source
12V/60W external power adapter (can be upgraded
to 150W while adopting poweredUSB module)
LCD Panel
15" with LED
backlight
15.6" LCD with LED
backlight
LCD Resolution
1024 x 768
1920 x 1080 FHD
Touch Sensor
P-CAP touch
Serial Port
3 ports, 1 x DB9 + 2 x RJ-50 (on I/O plate)
USB Port
(External Port)
1.) 3, 1 x USB 3.0 (on I/O plate) + 2 x USB2.0 (1
on I/O plate + 1 on side edge)
2.) 1 x 24V PoweredUSB port
PoweredUSB
Port
1 x 24V PoweredUSB port
LAN Port
1 x 10/100/1000 Mb (on I/O plate)
Display Port
1.) eDP connector (internal header, support 15.6"
LCD)
2.) 1 x Mini DP port (on I/O plate)
CR Port
1 port, controlling 2 CR (on I/O plate)
Audio Port
1 x internal 2W speaker
Expansion Slot
1 x M.2 slot
Dimension
(W x V x D in mm)
368 x 292 x 46.6
402 x 251 x 41.2
Weight
5.9 kg
5.0 kg
Environmental
Requirements
Operating：
0°C 〜40°C, 20%RH - 90%RH (with HDD)
0°C 〜50°C, 20%RH - 90%RH (with SSD)
Storage：
-20°C 〜70°C, 10%RH - 90%RH
Regulation Rules
FCC/CE

8
Attachment
RA-101
Slim MSR attachment for RT series
RA-103
iButton (or RFID) with one USB port attachment
for RT series
RA-104
2D scanner attachment for RT series
RA-301
3-in-1 MSR + Fingerprint Sensor + 2D scanner
attachment for RT series
LM/TM-4010DP
9.7" 2nd display for RT series terminal
LM/TM-4011DP
10.1" 2nd display for RT series terminal
LM/TM-4015DP
15" 2nd display for RT series terminal
※ The product information and specifications are subject to change without
prior notice. To get the detailed information on the RT-2015E/2016E,
please check this model from Posiflex Global Website.

9
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions manual, may cause
interference to radio communications. It has been tested and found to comply
with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC
Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the
user at his own expense will be required to take whatever measures to correct
the interference.
This is a class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
警告
本電池如果更換不正確會有爆炸的危險
請依製造商說明書處理用過之電池
警告使用者
這是甲類的資訊產品，在居住的
環境中使用時，可能會造成射頻
干擾，在這種情況下，使用者會
被要求採取某些適當的對策。

10
<MEMO>

11
<MEMO>

12
<MEMO>