POSIFLEX HS-2510W-2D User manual

1
Package Contents
HS-251xW-2D desktop POS.….x 1
Power adaptor.…………………x 1
Power cord……………………..x 1
Desktop mounting kit pack.…….x 1
(including 4 fixing screws, 4
plastic anchors, and 1 desktop
mounting bracket)
Desktop POS user manual……..x 1
HS-series 2D image scanner user
manual………………………….x 1
Recovery DVD (for preloaded
Windows OS)………………….x 1
Optional item(s)
Product Features
Standard Features
System
Intel® Bay Trail-D J1900 2.0G CPU up to 2.42G, 2M Cache,
quad-core Celeron CPU
DDR3L 1333 FSB, SO-DIMM socket *1, Max 8G
Mechanical Structure
Fan free structure for harsh environment
Monitor tilt adjustment angle from 17°to 45°
Display
9.7"/12" LCD touch panel, 1024x768 resolution
P-CAP touch panel
HS-2510W-2D/HS-2512W-2D
JIVA Desktop POS
User Manual
15592902010 Ver. Original
http://www.posiflex.com

2
Optional Items
System
SSD storage device
DDR3L 1333 FSB, SO-DIMM socket *1, Max 8G
POSReady 7, Windows 7, Windows Embedded 8.1 Industry
per request
WIFI
Wireless LAN
Views of the HS-251xW-2D
Front View of HS-251xW-2D
Rear View of HS-251 xW-2D
Top I/O Interface Cover
Bottom I/O Interface Cover
Cable Exit
Power LED
LCD Touch Panel
3-track
Magnetic Stripe Reader
(Optional)
2D Image Scanner
Smart Card Reader
(Optional)

3
Left Side View of HS-251xW-2D
Bottom View of HS-251xW-2D
View of I/O Interface of HS-251wX-2D
Top I/O Interface
1
COM (RJ50) Port
2
DB25 parallel port
3
USB3.0 Port
4
VGA Port
Bottom IO Interface
1
2
3
4
Power Button

4
Bottom I/O Interface
1
12VDC-IN Power Jack
2
RJ11 Cash Drawer Port
3
USB2.0 Port
4
RJ45 LAN Port
5
COM Port
6
PS2 Port for Keyboard
7
Line-Out Jack
Connecting Power Adapter and I/O Cables
Follow the steps listed below to open the bottom I/O-port
protective cover and connect cables.
1. Make the desktop POS lie on
the surface of a desk and the
LCD touch panel face down.
2. Press the portion A with
thumb and then lever the
cover with forefinger in the
direction B.
3. Remove the cover.
1
2
3
4
5
6
7
A
B

5
4. Connect power adapter and
I/O cables to the bottom I/O
interface of the desktop POS.
5. Make the cover join to the
wedge portions of the rear
plate of the POS.
6. Determine that the cover is
well wedged to the wedge
portions of the rear plate of
the POS.
7. Gather the I/O cables together
for cable arrangement and
lever down the 2 hooks of the
cover to cover the I/O
interface.

6
8. Determine that the I/O
interface is covered and the
cable passes through the cable
exit.
Connecting I/O Cables to the Top I/O Interface for Customer Display
If you want to connect I/O cable to the top I/O interface, follow
the steps listed below to open the top I/O-port protective cover
and connect I/O cables to the top I/O interface.
1. Press the cable-exit cover with
thumb.
2. Pull the top I/O-port
protective cover in the
direction A.
3. Remove the cover.
Cable out
Direction A

7
4. Remove the shield from the
bracket of the display.
5. Pass the connector of a cable
through the cable exit of the
bracket of the display.
6. Connect the connector of the
cable to the port of the
customer display.
7. Cover the portion A of the
bracket with the shield.
A

8
8. Determine that the shield
covering the cable is firmly
fixed onto the bracket.
9. Align the four holes of the
bracket with the four screw
holes formed on the bracket-
fixing portion of the top I/O
interface section.
10. Fix the cable into the concave
area of the display bracket for
arrangement.
11. Screw the display bracket to
the bracket-fixing portion of
the top I/O interface section.

9
12. Connect the connector of the
cable to the port of the top I/O
interface.
13. Break the cable-exit cover.
14. Make the cover join to the
wedge portions of the rear
plate of the POS.
15. Determine that the cover is
well wedged to the wedge
portions of the rear plate of
the POS.
16. Push the cover to make the 2
hooks of the cover to wedge
the 2 wedge portions of the
rear plate of the POS.

10
17. Determine that the I/O
interface is covered and the
cable passes through the cable
exit.
18. The customer display
installation onto the main unit
is completed.
Mounting the POS onto a Table
To avoid the POS from backward tilting and wagging when a
user touches the LCD panel, use the desktop-mounting kit
shipped with the POS to hold and secure the POS firmly on a
table. Please follow the steps below to mount the POS.
1. Determine a position of a table onto which the POS is
mounted. Then, take the desktop mounting bracket out of the
desktop mounting kit pack. Through the 2 holes formed on
the bracket, drill 2 holes on the table and plug 2 plastic
anchors into the 2 holes. Then, hold the bracket and then
apply the 2 self-tapping screws into the 2 holes to secure the
bracket.
Cable out

11
2. Align the 2 screw bolts on the
bottom of the POS with the 2
tracks of the bracket.
3. Push hard the POS backward along the 2 tracks of the
bracket on the table to firmly secure the POS.
To completely mount the desktop POS onto the table firmly, you
can apply two more self-taping screws into the 2 holes formed on
the backside of base stand of the POS, as illustrated below.

12
Powering ON the HS-251xW-2D
Then press the power button to power
on the POS. To power it off, press the
button again.
Once powering off the system, if you
want to power it on again, please wait
for at least 3 seconds.
If the system hangs due to a reason, such as software resource
conflict, please press and hold the power button for over 10
seconds around to forcedly shut down the system.
Status LED Indicator
After powering ON the HS-251xW-2D, you can read the system
operation status from the power LED indicator. The LED status is
described below.
LED
Status
Description
POWER
Solid blue
System power ON
Solid orange
System standby
Installing an Operating System
This product is highly professional equipment. Therefore, we do
NOT encourage you to install any operating system into this
machine without professional assistance. Posiflex Technology,
Inc. shall not be responsible for any technical support to
questions on this aspect. We suggest that you contact your dealer
for OS installation.
Operating System Recovery
For the HS-251xW-2D main system preloaded with an operating
system on HDD, Posiflex provides a recovery DVD shipped with
the main system for the preloaded operating system. The system
integrator shall take care of software restoration after the OS is
recovered.

13
If you plan to recover your operating system, we do NOT
encourage you to recover any operating system. Please contact
your service center for operating system recovery.
Operating the Table Scanner
HS-251xW-2D is provided with a 2D
image scanner. This scanner works to
scan 1D barcodes and 2D images. The
table scanner can work in USB HID or
USB Virtual COM mode. By default,
the scanner works in USB HID mode.
To change the operation mode of the
scanner, use the IAP Tools.
To get the tools, download the IAP Tools from the link:
http://www.posiflex.com/en-global/Download/download. For the
detailed information, refer to the laser barcode scanner user
manual.
Adjustment of LCD Monitor for a Better Viewing Angle
For an optimal viewing angle, you can adjust the LCD monitor up
and down around the directions A and B at the angle from 17°to
45°.
Optional Upgrade Kits
Posiflex HS-251xW-2D can work with multiple optional upgrade
kits, such as MSR, Smart Card Reader and the like. For the
detailed instruction, refer to the technical manual of HS-251xW-
2D or each of the user manuals of the optional upgrade kits.
A
B

14
Specifications
HS-2510W-2D
HS-2512W-2D
CPU
Intel® Bay Trail-D J1900 2.0G CPU up to 2.42G, 2M Cache, quad-
core Celeron CPU
Memory
DDR3L 1333 FSB, SO-DIMM socket *1, Max 8G
OS
POSReady 7, Windows 7, Windows Embedded 8.1 Industry per
request
Display
9.7" 1024 x 768 LCD P-CAP
touch panel
12" 1024 x 768 LCD P-CAP
touch panel
VGA
Interface
D-SUB 15 Pin, with 12V power for Posiflex LCD Monitor
Storage
Two SATA ports for 2.5'' or 1'' SATA device; EMMC adaptor
Board 8G/16G/32G on M/B
Ethernet
10/100/1000 Mb, 1 port
Wireless
LAN
Optional, with a reserved external antenna
Power
Supply
12VDC power adaptor, 60W
Serial Port
3 ports -- DB9 x 2 on bottom side (I/O plate), RJ-50 x 1 on top side
(I/O plate); +5V software switch control & jumper for COM1/2/3,
+12V jumper control for COM1/2/3
Parallel Port
Co-design for I/O plate DB25 connector or internal connector for
printer
CR Port
1 port, controlling 2 cash drawers
USB Port
4 ports, 1 USB3.0 port on the top I/O interface and 3 USB2.0 ports
on the bottom I/O interface
PS/2 KB Port
1 port on the bottom I/O plate
Audio
1 line-out jack
Extension
Slot
mini PCI-E slot, half-card size
Power
Switch
On M/B at right side wall of system, instant power ON when the
power switch is pushed.
Power-Off
Control
By hardware switch or by software, continuous push for 2 ~ 3 sec to
enable the power OFF function
Power-ON
Wake-Up
Through alarm/LAN

15
HS-2510W-2D
HS-2512W-2D
Mechanical
Installation
Desktop
LED
Indicator
Power on (blue) / standby (orange), bi-color LED indicators
Touch
Controller
USB interface
Touch
Sensor
P-CAP touch
Brightness
Control
By software
Scanner
Built-in 2D image scanner
Operating
Condition
0°C - 40°C, 20%RH - 90%RH (Equipped with HDD);
0°C - 50°C, 20%RH - 90%RH (Equipped with SSD)
Storage
Condition
-20°C - 70°C, 10%RH - 90%RH

16
Basic Optical Specifications
Scan method
CMOS area sensor
Number of effective pixel
752 (H) × 480 (V) dot
Image capture speed
60 fps (frame rate)
(Fastest seed of image capture)
View angle
Horizontal: 40.6°(approx.)
Vertical: 26.4°(approx.)
Auxiliary light source
(LED × 2)
Red LED
Peak wave length: 617 nm
Directivity angle 2θ1/2: 60°
Maximum radiation output: 15000 mcd
Light source for aiming
(LED × 1)
Green LED
Peak wave length: 528 nm
Maximum radiation output: 18700 mcd
Depth of field (mm)
Code 39
50~90mm (Resolution(0.127))
40~170mm (Resolution(0.25))
60~190mm (Resolution(0.33))
Code 128
35~135mm (Resolution(0.25))
UPC
35~150mm (Resolution(0.33))
PDF417
45~140mm (Resolution(0.25))
QR Code
50~130mm (Resolution(0.381))
DataMatrix
40~120mm (Resolution(0.31))
(Measured from the front end of the scanner)
※The product information and specifications are subject to change
without prior notice. To get the detailed information on HS-251xW-2D,
please check this model from Posiflex Global Website
(http://www.posiflex.com/en-global/Download/download).