POSIFLEX TX-2101 User manual

1
Package Contents
TX-2000/2100/2101 POS box (x 1)
12VDC/40W power adaptor (x 1)
Power cord (x 1)
User manual (x 1)
Product Features
Compact size to suit various applications
Optional internal Wi-Fi
6 USB 2.0 external ports for TX-2000/2100
4 USB 2.0 and 2 USB 3.0 external ports for TX-2101
Dual DSub VGA port
Fan-less system
14560900060 Ver. D0
http://www.posiflex.com
TX-2000/2100/2101
Fanfree POS Box User Manual

2
SOME IMPORTANT NOTES
FCC NOTES
This system meets industry & government requirements and applicable
standards. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions
manual, may cause interference to radio communications. It has been tested
and found to comply with limits for a Class A digital device pursuant to
subpart B of Part 15 of FCC Rules, which are designed to provide reasonable
protection against interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference
in which case the user at his own expense will be required to take whatever
measures to correct the interference.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any
person other than the authorized technicians. The user should consult his/her
dealer for the problem happening. Warranty voids if the user does not follow
the instructions in application of this merchandise. The manufacturer is by no
means responsible for any damage or hazard caused by improper application.
警告使用者
這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情
況下，使用者會被要求採取某些適當的對策。

3
Views of the TX-2000/2100/2101
Front View
Rear View
TX-2000/2100
TX-2101
I/O Interface

4
Bottom View
View of Rear I/O Interface of TX-2000/2100/2101
TX-2000/2100
1
Line out
2
USB 2.0 port
3
RJ45 LAN port
4
Dual DSub VGA port
5
COM (DB9) port
(COM 1 / COM 2)
6
COM (RJ50) port
(COM 3 / COM 4)
7
LPT Port
8
12VDC-IN power jack
9
RJ11 cash drawer (CR) port
Rubber Pad
Rubber Pad
DRAM Cover

5
TX-2101
1
Line out
2
HDMI port
3
USB 2.0 port
4
RJ45 LAN port
5
Dual DSub VGA port
6
COM (DB9) port
(COM 1 / COM 2)
7
COM (RJ50) port
(COM 3 / COM 4)
8
LPT Port
9
12VDC-IN power jack
10
RJ11 cash drawer (CR) port
11
USB 3.0 port
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the connector
of power adapter and all of the connectors of required I/O cables
respectively to the 12VDC-IN power jack and appropriate I/O ports.
Please make sure that each of the cables is fully connected to the
correct port. Damages due to incorrect connection or orientation are not
covered by product warranty!
Some cable connectors like the connectors of COM (RJ50) or LAN or
cash drawer (CR) cables have to be gently inserted until a click sound is
given. It is recommended that the I/O ports, such as COM (DB9) port
and VGA port, should be fastened with connector thumb screws after
the I/O cable connectors are completely connected. And please make
sure that each connector has to be connected to the right peripheral
device in the right way.
3
4
5
6
7
8
1
9
2
11
10

6
CAUTION: On doing insertion or extraction of a cable
connector, please always hold the connector head
itself instead of pulling the cable wire. Doing this
could damage the cables, which is considered as
an artificial damage and is not covered by the
warranty.
Note: The COM ports of TX-2000/2100/2101 do not supply power by
default. To make the COM ports supply 5VDC or 12VDC power,
you can set up the COM ports through jumper setting.
The VGA port of TX-2000/2100/2101 can supply +12VDC
power through jumper setting for Posiflex LCD monitor.
Nevertheless, except Posiflex peripheral device, do not connect
any other device to this port.
Installing Optional Peripheral Devices
Posiflex TX-2000/2100/2101 can work with multiple optional
peripheral devices, such as LCD monitor, cash drawer and the like.
Before installing an optional peripheral device, make sure that the
system is powered off and the external power source is removed from
the POS box to prevent electric hazard! Failure to follow the warning
description will void the product warranty!
For the detailed instruction, refer to each of the user manuals of the
optional peripheral devices.
Memory Upgrade
The TX-series system is provided with a DRAM slot for you to
expand or replace memory. Before shipping, a DRAM memory
has been inserted into the slot of the main board. To expand or
replace memory, follow 3 steps below.
1. Loosen and remove the screw from the
DRAM cover.

7
2. Remove the DRAM cover.
3. Replace the existing memory module.
To avoid users from damaging the main board of the system, it is
highly recommended that the memory expansion and replacement
are implemented by professional technicians.
Mounting the TX-2000/2100/2101 on the Wall (Optional)
1. Fix the wall mount bracket onto the wall
by using attached plastic anchors and
screws.
2. Do spiral insertion of 4 screw bolts into
the 4 screw bolt holes.
3. Lineup the 4 screw bolts to be inserted
into the 4 tracks. Then slide downwards
the system along the track until a click
sound is given for completely mounting
the system with the bracket on the wall.
For detailed installation description, please refer to the WB-4200
bracket installation guide.

8
Powering ON TX-2000/2100/2101
Then press the power button to power on the TX-
2000/2100/2101. To power it off, press the button
again.
Once powering off the system, if you want to
power it on again, please wait at least 3 seconds.
If the system hangs due to a reason, such as software resource
conflict, please press and hold the power button for 10 seconds
around to forcedly shut down the system.
Power Status LED Indicator
There is a power status LED indicators on the front side of the TX-
2000/2100/2101. After powering ON the TX-2000/2100/2101, you can
read the system operation status from the power status LED indicator.
The power LED status is described below.
LED
Status
Description
POWER
Solid green
System power ON
Solid red
System standby
Installing an Operating System
This product is highly professional equipment. Therefore, we do NOT
encourage you to install any operating system into this machine without
professional assistance. Posiflex Technology, Inc. shall not be
responsible for any technical support to questions on this aspect. We
suggest that you contact your dealer for OS installation.
Operating System Recovery
For the TX-2000/2100/2101 main system preloaded with an operating
system on HDD or SSD, Posiflex provides a recovery DVD shipped
with the main system for the preloaded operating system. The system
integrator shall take care of software restoration after the OS is
recovered.
If you plan to recover your operating system, we do NOT encourage
you to recover any operating system by yourself. Please contact your
service center for operating system recovery.

9
Operation Environment
Do NOT operate this terminal in an environment of poor ventilation.
During operation of the terminal, to avoid this terminal from
overheating, keep at least proper air clearance away from this terminal
for adequate air traffic.
Specifications
TX-2000
TX-2100
TX-2101
Processor
Intel® Baytrail-D,
J1800 (Default)
Intel® Baytrail-M,
N2807 (Option)
Intel® Baytrail-D, J1900
System Memory
DDR3L SO-DIMM socket x 1, up to 4GB
Storage Device
1 x SATA + 1 x
eMMC +1 x
MSATA Slot
1 x SATA port + 1 x eMMC
Power Supply
12V/40W, capable of being upgraded to 12V/60W or 12V/80W
OS support
POSReady 7 / Windows 7 / WIN 8.1 Industry / Windows 10 IoT
/ DOS
BIOS
INSYDE
Serial Port
2 x DB-9 ports+ 2 x RJ-50 ports
Parallel Port
1 x DB-25 connector
Standard USB
Port
6 x USB 2.0 External Ports+ 1 x USB 2.0
Internal Port
4 x USB 2.0 + 2 x
USB 3.0 External
Ports + 1 x USB
2.0 Internal Port
LAN Port
1 x 10 /100 /1000 Mb
Display Port
2 x VGA ports
2 x VGA ports + 1
x HDMI Port
CR Port
1 port, controlling 1 CR
PS/2 Port
1 port, on the front panel
DC Jack
1 port
Expansion Slot
1 x PCIe
Audio
Line out
mini-PCIe
mini-PCIe slot for WIFI module
LED Indicator
Bi-color power status LED indicator

10
TX-2000
TX-2100
TX-2101
WIFI/BT
802.11 b/g/n (WIFI + BT combo card for optional with two
antenna sets)
Environmental
Requirements
Operating :
0°C - 40°C, 20%RH - 90%RH
Storage :
-20°C - 70°C, 10%RH - 90%RH
※The product information and specifications are subject to change without prior
notice. To get the detailed information on TX-2000/2100/2101, please check this
model from Posiflex Global Website
(http://www.posiflex.com/en-global/Download/download).

11
<MEMO>

12
<MEMO>