PotteryBarn LUDLOW User manual

Date: 07-Aug-2014 www. potterybarn.com Page 1 of 5
LUDLOW TRUNK SECRETARY BLACK

Date: 07-Aug-2014 www. potterybarn.com Page 2 of 5
Important Safety Instructions:
•Please read all instructions carefully before assembling.
•For your safety, assembly by two or more adults is strongly recommended.
•Keep instructions for future use.
•Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Pre-assembly:
•Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as this
will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
•Use the parts and hardware lists below to identify and separate each of the pieces included.
•The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
•The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
Parts Included:
(A) Body 1x
(B) Legs 2x
(C) Drawer Box 2x
(D) Drawer Box 2x
(E) Shelf 1x
Hardware Enclosed:
F- Plain Washer (8x) G- Lock Washer (8x) H- Allen Bolt (8x) I- Allen Wrench (1x) J- Wood Screw (4x)
(1/4” x 5/8”) (1/4”) (1/4" x 3/4“) (6mm x 1”)
Tools required (not included):
Philips Head Screwdriver

Date: 07-Aug-2014 www. potterybarn.com Page 3 of 5
Assembly Instruction Steps:
1. Carefully place the Trunk Secretary body (A) upside down on a carpeted or scratch free work space. Insert Leg
(B1) to each matching number to the body (A).Insert Allen Bolt (H) with Plain Washer (F) and Lock Washer (G)
on the aligned assembly holes. Hands tighten withAllen Wrench (I). Insert Wood Screw (J) on the aligned
assembly holes. Hands tighten using Screw Driver.
2. Repeat step 1 to assemble Leg (B2), as shown in the illustration below.

Date: 07-Aug-2014 www. potterybarn.com Page 4 of 5
3. Make sure all connections are tight and secure. Grip Trunk Secretary firmly and carefully turns upright. Carefully
place the Removable Shelf (E), as shown in the illustration below.
4. Adjusting the levelers:
Due to an uneven floor, the furniture may not sit level that would cause the unit to wobble. Determine which
corner does not touch the ground correctly. With two people, follow these steps:
1. Carefully elevate the unit slightly to provide access to the levelers.
2. Turn the levelers until adequate contact will be made on the floor. Gently set down to stand and
check product’s stability.
3. Repeat steps until the unit is level to the ground.
5. Assembly is complete

Date: 07-Aug-2014 www. potterybarn.com Page 5 of 5
Note:
This Product has an Extendable Arm that is used as an added support to the Drop Down Door when being used as a
desk. Follow these simple steps to set up
1) Pull the Extendable Arm to its maximum length.
2) Open the Drop Down Door slowly until it sits on the Extendable Arm.
Care Instructions:
•Dust often using a clean, soft, dry and lint-free cloth.
•Blot spills immediately and wipe with a clean, damp, cloth.
•We do not recommend the use of chemical cleansers, abrasives or furniture polish on our
lacquered finish.
•Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores / catalog