PotteryBarn Mirror Etagere Iron Bedside Table User manual

Page 1of 3
Mirror Etagere Iron Bedside Table
Assembly Instructions
•Please read all instructions before beginning assembly.
•For your safety and convenience, assembly by two people is recommended.
•Use the parts and hardware lists to identify and separate each of the component included.
•Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts or
hardware.
Tools Required:
(1) Allen key
Parts Included:
(1) Side Frame (Left) - A 1(1) Side Frame (Right) – A 2
(1) Top Frame-B (2) Shelf Frame - C
(1) Antique Mirror (Top) - D (2) Antique Mirror (shelf) - E
Hardware Included:
(12) Bolts - a (12) Lock Washer - b (12) Flat Washer - c
(12) Rubber Pad - d

Page 2of 3
Assembly Instructions:
1. Assemble the table on soft, scratch-free surface such as a carpet or rug.
2. Attach the Top frame (B) and Shelf frame (C) to the Left side frame (A1) using Bolt (a), Lock washer (b), Flat
washer (c), and loosely tighten the Bolts (a) with Allen key. Then attach the Right side frame (A2) to the Top
frame (B) and Shelf frame (C), loosely tighten the Bolts (a) with Allen key. See Figure 1.
3. Securely tighten all the Bolts (a) by Allen key, But do not over tighten them. See Figure 2.
4. Turn the assembled table to upright position. Put the Rubber pad (d) on the top of Top frame (B) and
Shelf frame (C) as shown, then gently lay the Antique mirror (D) & (E) on the Top frame (B) & Shelf frame (C).
See Figure 3.
Figure 1
Figure 2
BCC
A2
A1
a
A 2
BCC
a
b
c
A 1

Page 3of 3
5. Adjusting the levelers:
Due to an uneven floor, the furniture may not sit level due causing it to wobble. If the table wobbles,
determine which corner does not touch the ground correctly. With two people follow these steps:
1. Carefully elevate the item slightly to provide access to the levelers attached to the bottom. (Figure.4)
2. Turn the levelers until adequate contact will be made with the floor. Gently set down the piece and
check stability.
3. Repeat steps until furniture sits firmly on the ground.
6. Assembly is now completed.
Care Instructions:
•Dust with a clean, soft damp cloth and wipe dry immediately.
•Avoid the use of chemicals and harsh cleaning agents.
thank you for your purchase
stores | catalog | www.potterybarn.com
Figure 4
Figure 3
D
E
E
d