PotteryBarn Mason Double Console with Sink User manual

Page 1of 3
Mason Double Console with Sink
Assembly Instructions
Please read all instructions before beginning assembly.
For your safety and convenience, assembly by two people is recommended.
Use the parts and hardware lists to identify and separate each of the components included.
Save all packing materials until assembly is complete to avoid the accidental discarding of smaller parts or hardware.
A standard 8”spread faucet should be used with this sink console.
Note : Console need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly and
installation are not included : ex. Shim, spacer, high quality silicone or acrylic based bath sealant, etc.
Note : Avoid moving the top after it has been set into place.
PARTS Included:
1 –Square Basin –(1 x)
2 –Console base –(1 x)
1
2
Assembly Instructions: .
1. Leveler adjustment: Levelers are pre-installed on the legs and adjust as needed to make sure the console is leveled.Turn
counter-clockwise to increase height, clockwise to decrease height. See Fig. 1.

Page 2of 3
Mason Single Console with Sink
2. Apply a high quality silicone or acrylic based bath sealant to the corners of the basin “1”rim where it will contact the
base”2”. Place basin “1”flat on console base “2”. Avoid moving the basin after it has been set into place.
1
2
3. Open consoles top drawer to provide working space for installation of faucet and water supply.
Wood Care Instructions:
Dust with a clean, soft damp cloth and wipe dry immediately.
Avoid the use of chemicals and harsh cleaning agents.
thank you for your purchase.
stores | catalog | www.potterybarn.com
Fig. 1

Page 3of 3
Mason Single Console with Sink
Back view
500