PotteryBarn Welcome Stag Art User manual

P: 1/ 3
Welcome Stag Art
Mounting Instructions
HARDWAREINCLUDED:
Hanging Orientation Options:
Mounting Instructions:
TOOLS NEEDED (not included):
1
2
2 pcs
2 pcs
Note: The provided mounting hardware is meant for
drywall and stud construction only. For other wall
types, please consult your local hardware store for
assistance in selecting the appropriate hardware.
Measure the distance between the center ofthe
two D-rings.
With the back of the Welcome StagArt facing away
from the wall, hold it against the wall at a desired
mounting location. Mark two reference points (A, B)
on the wall as shown.

P: 2/ 3
Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level.
Make two insertion marks (C, D) centered along the line using the measurement “a”.
Use astud-finder to determine if there is a wallstuds located at either insertion mark.
Install the proper hardware, as shown below. Note that the head of each screw resides about 3/8” from the
wall.
For stud mounting:
Tips:
The anchor is self-drillable.
No pilot hole required.
3
5
For dry wall mounting:
4

P: 3/ 3
With the help of another person, hang the Stag Art tothe wall so that the D-rings engage the screw heads.
CARE INSTRUCTIONS:
To clean theWelcome StagArt, wipe with asoft, dry cloth. Do not use abrasive or strong chemical household
cleaners.
Thank you for your purchase!
Stores | Catalog | www.potterybarn.com
6