Power Practical PRONTO 12 Service manual

PRONTO 12 Device Functions
QUICK REFERENCE MANUAL
Power Guide
Store power fast to charge your
USB & 12V devices on-the-go.
Fast Charge the Pronto 12 Read the Smart Dials
Plug the included fast-charge wall plug
into your A/C wall outlet. Connect
wall plug to the Pronto’s fast-charge
input to begin charging.
The Smart dials display the charge
rate of the Pronto and its Battery Level
(Refer to Power Guide)
Power Button
Cap / Strap
12V Output
Fast-Charge Input
USB Outputs
Charge Rate
Battery Level
Charge Rate Battery Level
4.5+ Amps
4 Amps
3 Amps
2 Amps
1 Amp
Less than 1 Amp
100% Charged
82% Charged
66% Charged
50% Charged
32% Charged
16% or Less Charged
Faster
Slower
The speed at which the Pronto is recharging.
The charge rate dial will only light up when
you are re-charging the pronto battery pack.
The amount of charge left in the Pronto. To
check the battery level at anytime, press the
power button.
12V Adapter

• Please read and follow all Pronto instructions
before use.
• Do not expose Pronto to high humidity or water.
• Do not modify or disassemble the Pronto.
• Do not connect input and output in reverse.
• Do not expose the Pronto to fire or water.
• Use the Pronto in the temperature range 0°C -
40°C.
• Do not drop, throw, or kick the Pronto.
• In the event that the Pronto leaks fluid and
comes in contact with your eyes, wash out
immediately with clean water and consult a
physician.
•If any heat discoloration or tranformation are
found during use of the Pronto, stop use
immediately as it may cause extreme heat or
smoke.
•In the event that the Pronto is damaged or
ceases to function properly, stop use immediately
and contact Power Pratical.
Support
This manual provides you with all
the information you need to use
the Pronto 12. For more informa-
tion on our other portable products
or if you require additional support,
please visit powerpractical.com
©2015 Power Practical Inc. is a trademark of
Power Practical Inc.
POWER PRACTICAL INC.
244 W. 300 N. Suite 210
Salt Lake City, UT 84103
1.801.335.5064
www.powerpractical.com
1 Year Limited WarrantyWarnings
Charge Your USB Device
Plug your device’s USB cable into the
Pronto. Press the Pronto’s power
button to display battery capacity and
begin charging.
Charge Your 12V Device
Plug the included 12V adapter into the
Pronto’s 12V output then plug your
device’s car charger into adapter.
Press the Pronto’s power button to
display battery capacity and begin
charging.
This Product comes with a limited 1 year warranty to the original purchaser for manufacturing flaws,
and is conditioned upon proper use by the purchaser. Should this product not function properly under
normal use, contact Power Practical for return process information. Power Practical alone will
determine if the problem is due to a manufacturing flaw. If so, Power Practical will repair or replace
the unit at their discretion and return it to you, free of charge.
Repair or replacement shall be the purchaser’s sole remedy under this warranty. Power Practical
reserves the right to replace any discontinued product with a new product of comparable value and
function.
This warranty does not cover any damage or malfunction arising from misuse, improper maintenance,
negligence, normal wear and tear, or accident. This warranty applies only to the original purchasers
and proof of purchase is required.
EXCEPT AS PROVIDED HEREIN, THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
Power Practical SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
WHATSOEVER.
This warranty gives you specific legal rights. You may also have other rights that vary from state to
state. Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitation or exclusion of implied warranties, so the above exclusions or limitations may not apply to
you.