Powerfiller POWERFILLER 3 User manual

ELECTRIC CIGARETTE INJECTOR
USER MANUAL: POWERFILLER 3
English | Deutsch | Francais | Espanol

Page 02
Yeah -have fun with your Powerller machine -it's fantastic
that you chose a machine from our range.
Please follow the operating and care instructions to ensure
an optimal lling result for as long as possible.

1.) Powerller 3 -Electric Cigarette Stung Machine
2.) Collecting Tray
3.) Metal Cleaning Pin
4.) Cleaning Brush
5.) Tobacco Stuer
6.) Power Cord
The delivery package will consist of the following:
Page 03
DELIVERY SCOPE

Page 04
Plug the machine into the power supply
using the power supply unit -the green
light indicates that the machine is ready.
Step 1:
Fully move the lever upwards to open
the tobacco compartment -then put a
cigarette tube onto the metal device.
Step 2:
Fill the tobacco compartment lightly with
tobacco.
Step 3:
Compress the tobacco in the chamber using
the tobacco stuer.If you stu too rmly, the
machine is unable to produce the cigarette
and will not produce a good stungresult.
Step 4:
USER GUIDE

Gently move the lever all the way down
to start the stung process and start
lling the cigarette tube with tobacco.
Step 5:
Et voilà -the completed cigarette drops
into the collecting tray and the stung
procedure is nished.
Step 6:
Use the black metal pin to clean the
tobacco compartment from the outside
and remove solid tobacco residue in the
chamber.
Step 7:
Using the brush, thoroughly remove any
remaining tobacco residue.
Step 8:
Page 05
Enjoy your cigarette and keep in mind to take
care of your machine.
USER GUIDE