9
Volumetric Measurement
‣Press the area / volume button twice. A cube will appear
on the display screen with one edge flashing. Follow the
instructions displayed on the screen as below:
‣Press the read button to measure the first edge (length).
‣Press the read button to measure the second edge (width).
‣Press the read button to measure the third edge (height).
‣Volume will be calculated automatically with results shown
on the display screen.
‣Press the off / clear button to clear measurement.
Pythagoras Measurement
To calculate the unilateral distance of a triangle pythagorean
mode can be used. When taking measurements of the triangle
ensure the length of the right side is shorter than the length of
the hypotenuse. If not, the instrument will display an error signal.
To ensure the accuracy of measurement, take measurements
from the same starting point of the first order hypotenuse.
Then follow with the measurement of the right side.
Please follow the instructions according to the method
required. (See diagrams on page 10 - 11 to determine the
appropriate method).
