
Mop head removal and cleaning
Removing mop head:
Gently step on the mop head while pushing the mop
away from you. The mop must be oriented so that the
disk attachment joint does not bend as you push the
mop away.
First loosen the mop lock on the lower handle,
then put the mop head into the bucket, make sure
the mop head fixed onto the rotating head, then
gently press the mop down to rinse.
First loosen the mop lock on the lower handle, then
transfer the wet mop head into the dehydrator basket,
Press the handle downward and upward vertically to
dehydrate the water.
Do not plug the mop lock when not in use.
Pair upper disc and cloth disc, push them together
until a ‘ click’ sound is heard.