Powr-Flite PE010-G03-U Guide
PHOTON 3.5 Gallon Spotter
Operations and Parts Manual
PE010-G03-U
2
CONTENTS
Getting Started
Introduction 3
Warranty 3
Grounding Instructions 4
Important Safety Instructions 5
Technical Specifications 6
Operation
Operation 7
Troubleshooting 8
Parts Diagram 9
Parts List 10
3
INTRODUCTION
Warranty
Within 30 days of purchase, to activate product warranty,
go to: https://www.powr-flite.com/warranty-registration
Warning Labels
Prior to operating the Portable Battery Powered Mister, read and
understand completely this owner’s manual paying special attention to
warning labels. These labels indicate a potentially hazardous situation
that could result in death or serious injury if not avoided. Use only as
described in this manual.
Important
There are no owner serviceable parts inside this machine. Removal
of screws and accessing internal components will void all warranty
claims.
Personal Protection Equipment (PPE)
Personal Protection Equipment (PPE) should be worn during the
operation of this machine. Chemicals can remain airborne for some
time after application and therefore safety glasses and masks are
recommended. Gloves should be worn any time chemicals are
handled.
Your new Powr-Flite unit is a high quality, precision-made product. All parts used in the
manufacturing of this unit have passed rigid quality control standards prior to assembly. Please
safeguard the original receipt/invoice given at the time of purchase. If you experience any
problems with your unit during the warranty period, the original receipt/invoice will act as proof of
purchase.
Upon receipt, inspect outer box for exterior damage. Unpack all internal parts, ensure all items
are present according to the owner’s manual, and review components for damage.
Each unit is tested and thoroughly inspected prior to shipping. If damage is discovered,
immediately notify the transportation company that delivered your machine and request an
inspection. As a manufacturer, we are unable to act upon any claim for concealed damage and
you must originate the claim. Be sure to keep the carton, packing inserts, and carrier’s receipt
until the inspector has verified your claim.
4
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides
a path of least resistance for electric current to reduce the risk electric shock. This machine
is equipped with a cord having an equipment -grounding conductor and grounding plug. The
plug must be inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
This appliance is for use on a nominal 115-volt circuit, and has a grounding plug that looks like
the plug illustrated in sketch A.
A
DANGER: Improper use of the grounding plug can result in a risk of electric shock.
WARNING!
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the outlet
is properly grounded. DO NOT modify the plug provided with the appliance. If it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
GROUNDING METHODS
5
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT
Read and understand this owner’s manual and all labels on the unit before operating. Safety is a
combination of common sense,staying alert, and knowing how your unit works. Use this unit only
as described in this manual. Use only manufacturer’s recommended attachments. To reduce the
risk of personal injury or damage to your unit use only recommended accessories.
WARNING To avoid fire, DO NOT use with a flammable or combustible liquid or floor cleaner.
WARNING To avoid electric shock, DO NOT expose to rain. Store Indoors.
When using this unit, basic precautions should always be followed, including the following:
1) DO NOT leave unit when plugged in. Unplug from outlet when not in use and before servicing.
2) DO NOT allow unit to be used as a toy. Close attention is necessary when used around or near
children.
3) Use only as described in this manual. Use only manufacturer’s recommended attachments.
4) DO NOT use with damaged cord or plug. If unit is not working properly because it has been
dropped, dropped into water, left outdoors, or damaged in any way, contact a service center
5) DO NOT handle plug or appliance with wet hands.
6) DO NOT put any objects into openings.
DO NOT use with any opening blocked: keep free of dust, lint, hair, or anything that may
reduce air flow.
7) Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
8) DO NOT pick up anything that is smoking or burning such as cigarettes, matches, or hot ashes.
9) DO NOT use to pick up hazardous chemicals.
10) Turn off all controls before unplugging.
11) Turn unit off immediately if foam or liquid comes from machine exhaust. Empty & clean out
recovery (dirty) tank and use defoamer to correct the problem.
12) DO NOT use to pick up flammable or combustible liquids such as gasoline or use in areas
where they may be present.
13) DO NOT use where oxygen or anesthetics are used.
14) Replace damaged or worn parts immediately with genuine original equipment parts to
maintain safety.
15) This unit must be connected to a properly grounded outlet only. See grounding instructions.
16) DO NOT use equipment out of doors or in the rain.
17) DO NOT use equipment near or around flammable or explosive materials, fuels, or solvents.
18) DO NOT allow the unit to freeze.
19) Anyone designated to operate this equipment must, without fail, read and thoroughly
understand all instructions and precautions prior to use.
20) Do not operate in standing water.
21) Do not operate equipment under any unsafe condition.
22)Do not use the machine for totally dry vacuuming. This machine is not fitted with a fine dust
filter.
23)Do not use citrus-based cleaners in this machine.
24)Do not use cleaning chemicals in this machine except those recommended for commercial
extraction equipment. The use of any chemical with abrasive additives voids the warranty.
25)Use defoamer at all times to prevent damaging the vacuum motor.
26)Do not use water in excess of 140° F (62° C).
6
IMPORTANT SAFETY INSTRUCTIONS
Pressurized Equipment Warning
Unit is under high pressure when machine is activated. If leaks are
visible around coiled hose connections, replace hose immediately
with part number shown in this manual. If pump continues
to run when the trigger is not depressed, turn machine OFF,
discontinue use and return to an authorized service center.
Flammability Warning
NEVER fill unit with flammable chemicals. Do NOT use
in an area where flammable fumes are present.
State of California Proposition 65 Warnings
WARNING: This product contains one or more chemicals
known to the state of California to cause cancer.
WARNING: This product contains one or more chemicals known to the
state of California to cause birth defects or other reproductive harm.
Intended Use
Do NOT modify this unit in any way or adapt it for any other use.
Modification of this unit in any way will void all warranties and could
create safety hazards.
Technical Specification
Model PE010-G03-U
Input Voltage 115 VAC
Plug Type US
Solution Tank 3.5 Gal/13.2 l
Recovery Tank 2.5 Gal/9.5 l
Dimensions 23” x 11” x 23”/58cm x 28 cm x 58 cm
Weight 35 lbs./16kg
Waterlift 89”/226 cm
CFM/CMM 104/3
Solution Pressure 55 p.s.i./3.8 BAR
7
OPERATION
Filling the Pro Spotter
• Unplug the unit.
• Disconnect the solution and recovery tanks.
• Remove the upper recovery tank.
• Add water and/or chemicals to the lower solution tank. Fill only to the fill line indicated on
the label on the inside of the solution tank. The tank will hold up to 3.5 gallons.
Operating the Pro Spotter
• Attach the solution hose to the quick disconnect in the pocket at the front of the machine.
• Attach the vacuum hose to the vacuum inlet (handle) above the recovery tank lid.
• Turn the 3-way switch to use either the pump and vacuum or the vacuum alone. (Allow
approximately 30 seconds for the pump to prime).
• Use the hand tool to spray and recover the solution.
• The float shut-off will disable the suction of the unit when the recovery tank is full. The oper-
ator will notice a distinctive change in the sound of the vacuum motor when the shut-off is
activated. Empty the recovery tank, and then fill the solution tank, to resume cleaning.
Emptying the Recovery Tank
• Unplug the unit.
• Disconnect the solution line and vacuum hose.
• Unlatch the recovery tank from the base of the unit and remove.
• Remove the drain plug.
• Drain the tank over a suitable outlet for wastewater.
• Rinse the tanks after each use.
• Store the unit with the lid off of the recovery and allow it to air dry.
Vacuum Hose Attachment
Latch Assembly Recovery Tank Drain
8
TROUBLESHOOTING
Problem Possible Cause Solution
No Spray Pump is not primed. Depress lever on hand tool to
release pressure.
Low Solution Flow
Solution tank level is low.
Clogged filter.
Clogged Spray jet.
Refill Solution tank.*
Clean the screen filter on the
hose in the solution tank.
Clean the spray jet in the hand
tool.
Low Suction
Recovery tank is full.
Clogged Hand Tool or hose.
Excessive foam.
Empty recovery tank.
Clean Hand Tool and hose.
Add defoamer to recovery
tank.
TROUBLESHOOTING
*Before re-filling the solution tank, always empty the recovery tank.
3-Way Switch
Solution Hose Connection
9
PARTS DIAGRASM
3
2
5
1
10
13
60
58
52
56
59
51
15
22
54
14
18
19
47
23
24 41
40
44
39
38
34
31
32
30
33
29
35
28
36
37
27
26
25
46
45
48
21
20
50
12
57
11
53
55
9
8
7
6
4
35
22
16
49
16
53
30
43
42
17
31
10
PARTS LIST
No. Part No. Qty Description
1 X8295 6 Screw, #8 x 3/4”
2 PX103A 1 Screw-In Lid 4” w/Black Ring
3 X9061 1 Shut Off Disk
4 X9087 1 Washer
5 X9088 1 Screw 8-18 x 1/2”
6 PX103AG 1 Lid Gasket
7 X9518 1 Deflector
8 X9062 1 Float
9 X9082 1 Pipe 1-1/2 x 6-1/2”
10 X9076 1 Bulkhead Fitting 1-1/2” MPT x 1-1/2” Female Slip
11 AA195 1 Detailer Tool 1-1/2”
12 X9058 1 Stretch Hose Assembly 10’ (PFS36)
12 X2058 1 Non-Stretch Hose Assembly 10’ (PFS36KIT)
13 PAS36 1 Drain Hose Plug and Strap
14 PX30 1 Solution Tank Filter
15 PX213 1 Nylon Fitting 1/4” MPT x 1/4” Hose Barb
16 7DL003 6 Hose Clamp
17 71817A 26” Hose, 1/4” 250 PSI
18 PX14A 1 Gasket
19 PX46 1 Lock Nut
20 X9079 1 Gasket
21 X1920BLK 1 Solution Tank
22 PC66 2 Hose Barb 1/4”H x 1/8MPT
23 X9696 1 Gasket
24 X8237 3 Nyloc Nut
25 X9060 1 Vacuum Motor Screen
26 1942-A 1 Vacuum Motor 2 Stage 115V
27 X9045 3 Spacer
28 PC10 1 QD Male 1/8” x 1/8” NPT
29 X9412 1 Washer
30 7AT006 2 Brass 90oElbow Fitting 1/4” Barb x 1/8” MPT
31 X8212 8 Washer
32 X8291 3 Screw 1/4-20 x 5-1/2”
33 X9047 2 Swivel Caster 45mm 1/4-20 x 3/4”
34 7BS003 2 Screw 1/4-20 x 1/2”
35 00-0600-0503 8 Washer
11
PARTS LIST
No. Part No. Qty Description
36 30676 5 Screw 10-24 x 5/8”
37 X9046 1 Base Plate
38 X9048 1 Rocker Switch
39 X8008N 1 Steel Conduit Lock Nut 1/2”
40 PD8 1 Plastic Strain Relief
41 X9719 1 Cord 18/3 SJTW 15’ Black
42 X8201 1 Screw #8 x 3/8”
43 7CZ001 1 Vacuum Hose 2”
44 PX215 2 Hose Clamp
45 FJ5082 1 Pump
46 PX204 2 Pump Mount
47 PX214 1 Nylon Fitting 90o1/8” MPT x 1/4” Hose Barb
48 X8271 5 Nyloc Nut
49 X9064 1 Gasket
50 PX209 1 Foam Filter
51 7AJ004 1 Brass Anchor Connector 1/8” FPT x MPT
52 72115A 1 Washer
53 X8262 6 Screw 8-32 x 1/4”
54 X9059 2 Latch w/Keeper
55 X8278 2 Screw 8-32 x 1/2”
56 X9106 2 Nut
57 X1921BLU 1 Recovery Tank Blue
58 X9065 4 Screw 1/4-20 x 1”
59 X8990 1 Handle w/Wheel Assembly
60 72173A 1 Spring Clip
Not Shown X2045 1 Fill Line Indicator Label
12
Powr-Flite
3101 Wichita Court
Ft. Worth, TX 76140-1755
Phone: 817-551-0700
WWW.POWR-FLITE.COM
P-OMPE010-G03-U-MAN 06/2022
Record of Purchase
Serial Number:
Purchase Date:
Dealer:
Phone Number:
Table of contents
