PR Lighting PRO STAGE ZOOM PR-3057 User manual

PRO STAGE ZOOM
PR-3057, 3058
This product manual contains important information about the safe installation and
use of this projector. Please read and follow these instructions carefully and keep
this manual in a safe place for future reference.
PR LIGHTING LTD.
Yingbin Road, Dashi Panyu, Guangzhou, 511430 China
http://www.pr-lighting.com

2/8 Pro Stage Zoom_EN.doc

SAFE USAGE OF THE PROJECTOR 3
INSTALLING THE PROJECTOR 4
ZOOM 4
FITTING THE LAMP 5
POWER CONNECTIONS 6
KEEPING THE PROJECTOR CLEAN 6
TECHNICAL SPECIFICATIONS 6
LIGHT OUTPUT 7
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change
without notice. Whilst every care is taken in the preparation of this manual we reserve the right to change specifications in the
course of product improvement. The publishers cannot be held responsible for the accuracy of the information herein, or any
consequence arising from them.
Every apparatus has been tested completely and packed properly by the manufacturer. Please make sure the packing and / or
the apparatus is in good condition before your installation and use. Should there be any damage caused by transportation,
consult your dealer and do not use the apparatus. But any damage caused by improper use will not be assumed by the
manufacturer and / or dealer.
Safety cord (1 PCS)
This manual (1 PCS)
Colour-filter holder (1 PCS)
Gobo holder (2 PCS)
Optional: Manual Iris (1 PCS),
Colour-filter holder Manual Iris Gobo holder Blade
Thank you for purchasing our products Pro Stage Zoom, PR-3057, PR-3058.
This product manual contains important information about the safe installation and use of this
projector. Please read and follow these instructions carefully and keep this manual in a safe place for
future reference.
The Pro Stage is an innovative projector with an elegant housing made from high quality aluminum-
alloy with an insulating painting finish. The product complies to CE norms and standards.
The unit can be hung easily and safely. The angle of inclination for the projector-body is convenient to
be adjusted. The unit uses high qualified reflector with special reflective coating which can reduce the
heat energy greatly, so the life of the elements in the projector can be prolonged effectively. Using
blades provided you can get various images and using the filter holder provided you can get different
colour effects. And you can adjust conveniently and safely without any tools. The projector is suitable
for applications in stage, disco, night club or artistic applications.
15°-30° Lens-Barrel PR-3057
25°-50° Lens-Barrel PR-3058
INDEX
INTRODUCTION
ACCESSORIES

3/8 Pro Stage Zoom_EN.doc
When unpacking and before disposing of the package check there is no transportation damage before
using the projector. Should there be any damage caused by transportation, consult your dealer and
do not use the apparatus. Keep the package well for your possible future transportation.
The projector is for indoor use only, IP20. Use only in dry locations. Keep this device away from rain
and moisture, excessive heat, humidity and dust. Do not allow contact with water or any other fluids,
or metallic objects.
The projector is not designed or intended to be mounted directly on to inflammable surfaces.
Hot housing surface! Do not touch the housing of the projector with your hand during operation.
The projector is only intended for installation, operation and maintenance by qualified personnel.
The projector must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
Do not project the beam onto inflammable surfaces, minimum distance is 5m. 5m
Avoid direct exposure to the light from the lamp. The light is harmful to the eye.
Do not attempt to dismantle and / or modify the projector in any way.
Electrical connection must only be carried out by qualified personnel.
It is essential that each projector is correctly earthed and that electrical installation conforms to all
relevant standards.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-
cord come into contact with other cables. Only handle the power-cord by the plug. Never pull out the
plug by tugging the power-cord.
Keep the lamp and lens clean. Do not touch the lamp-glass and lens with bare hand.
Switching the lamp on and off at short intervals will reduce the life of both the lamp and the projector.
Occasional breaks will prolong the life of both the lamp and the projector.
Always replace the lamp if it becomes damaged or deformed.
Always replace the lens if it becomes cracked or badly scratched.
Never run the projector without a lamp and a lens in place.
Always disconnect from the mains, when the device is not in use or before
cleaning it or before attempting any maintenance work.
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
SAFE USAGE OF THE PROJECTOR

4/8 Pro Stage Zoom_EN.doc
Hole for Safety Cable
Passing through
Lens-Barrel
Locking Knob
Blade or Gobo Holder
Displacing the cover will appear the slot
for inserting the gobo with device
Cover Screw
Cover
Lamp Housing Bolt
Lamp Adjustment
Fixing Holes
Bracket Lens-Barrel
Retaining Block
for Filter Holder
Locking Knob
Adjustment Knob
This unit has been designed to be hung. Hang the unit via its bracket using M12 size bolt(s). When
you want to adjust the angle of the body of the projector, you only loosen the locking knob and then
adjust the angle of the body. You can change the lens-barrel by loosening 2 lens-barrel locking knobs
and rotate the lens-barrelby loosening 2 lens-barrel holder rotating knobs. Always ensure that the
projector is firmly positioned to avoid vibration and slipping, and always ensure that the structure to
which you are attaching the projector is secure and is able to support the weight of each Pro Stage
Zoom.
For safety the unit should have a secondary fixing with a safety cable through the hole on the upper of
the unit.
Locking lever
push button
30
°
25
°
20
°
15
°
Press the locking lever push button and lift it to unlock the adjustment knob.
To reduce the beam angle, rotate the adjustment knob clockwise. To enlarge the beam angle,
rotate the adjustment knob anti-clockwise.
Slide the adjustment knob forward or backward to soften or sharpen the edge.
Press the locking lever push button into the position until the beam angle and the edge are
established.
INSTALLING THE PROJECTOR
FOCUS AND ZOOM

5/8 Pro Stage Zoom_EN.doc
Important: Before installation the GKV lamp verify that the GKV lamp you use is suitable for the
voltage at your facility. Operating lamps beyond their rated voltage reduces lamp life and can cause
premature lamp failure.
Lamp Housing
Lamp
Lamp Housing Bolt
Lamp Adjustment
First, loosen the lamp housing bolt and pull the housing straight out from the back of the fixture as
shown above.
Holding the lamp with the base push down on the lamp base until the lamp is firmly seated. Make sure
that the lamp is fully seated, with the bottom of the lamp heat sink flush to the lamp housing casting.
To reinstall the lamp housing, center it on the reflector and the bolt hole, then tighten the lamp
housing bolt to secure the lamp housing in place.
NOTE: To optimize light output it will be necessary to adjust the lamp adjustment. Adjust the lamp in
or out to get a proper focus via rotating the lamp adjustment by hand.
FITTING THE LAMP

6/8 Pro Stage Zoom_EN.doc
The unit is supplied with a power cord. Should any other connections be required they must be
carried out with the following configuration:
L (live) =brown
E (earth) =yellow/green
N (neutral) =blue
IMPORTANT
It is essential that each projector is correctly earthed and the electrical installation conforms to
all relevant standards.
To ensure the reliability of the projector it should be kept clean. The lens and reflector should be
regularly cleaned to maintain an optimum light output.
Do NOT use any glass cleaner or any type of solvent on the reflector. Before cleaning the
reflector remove the lens barrel and the barrel holder so you can access the reflector from the front of
the fixture. When cleaning the reflector use a damp, clean, soft, lint-free cotton cloth with amide,
soapy water solution and gently wipe the reflector, and then remove any soapy water residue with a
clean, soft, lint-free cotton cloth dampened with water. Do not use paper towels or harsh materials
to wipe the reflector.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or
particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics. It is
recommended to clean the lens at least once every 20 days and clean the reflector at least once
every 30 / 60 days.
Do not use any organic solvent, e.g. alcohol, to clean the housing of the
projector.
Power supply: 230V AC 50Hz
Lamp: GKV 600W （Manufacturers Rated Lamp Life:250 hours）
Socket: G9.5
15°-30° Pro Stage Zoom, PR-3057, Net Weight: 10.2kg
KEEPING THE PROJECTOR CLEAN
POWER CONNECTIONS
TECHNICAL SPECIFICATIONS

7/8 Pro Stage Zoom_EN.doc
25°-50° Pro Stage Zoom, PR-3058, Net Weight: 9.0kg
30°
15°
6630
1810
1.33
5
2.66
4m
DISTANCE (m) 0
0
0
5m
15°
（ lux ）
2m
2m
0m
4m 3m
1m
3m
1m
5m
30°
（ lux ）
4.00
15
7.97
2.66
5.33
10 5.33
10.5
20
4101630 730
200450 110
25
13.3
6.66
70
260
15°-30° Pro Stage Zoom
DISTANCE (m)
25° DIAMETER (m)
8m
4.41
5
2.21
1020
4730
25° 50°
50° DIAMETER (m)
190
40
11
22.05
25
60255 110
5201180 290
20
17.64
8.86
10
882
4.43
13.23
15
6.64
50° （ lux ）
10m
2m
6m
2m
6m
8m
0m
4m
4m
25°
（ lux ）
10m
0
0
0
25°-50° Pro Stage Zoom
LIGHT OUTPUT

8/8 Pro Stage Zoom_EN.doc
PR LIGHTING LTD.
No. 571, Yingbin Road, Dashi, Panyu, Guangzhou, China
Post-Code: 511430
TEL: [phone]
FAX: [phone]
P/N: 321030030
Last Revision: 01: 08: 2005