Precisa 360 EP Series User manual

Series 360 EP / ES Service manual
Service-Anleitung
Precisa Gravimetrics AG Moosmattstrasse 32 Box 352 CH-8953 Dietikon
SERVICE
MANUAL
SERIES 360 EP
SERIES 360 ES
Copyright
These service instructions are protected by copyright. All rights reserved. No part of the service instructions may be reproduced,
processed, duplicated or published in any form by photocopying, microfilming, reprinting or other process, in particular electronic
means, without the written agreement of Precisa Gravimetrics AG.
Diese Service-Anleitung ist urheberrechtlich geschützt. Alle Rechte vorbehalten. Kein Teil der Serviceanleitung darf ohne schrift-
liche Genehmigung der Precisa Gravimetrics AG in irgendeiner Form durch Fotokopien, Mikrofilm, Nachdruck oder andere Ver-
fahren, insbesondere auch elektronischer Art, reproduziert, verarbeitet, vervielfältigt oder verbreitet werden.
© Precisa Gravimetrics AG, 8953 Dietikon, Switzerland, 2009.
Order no.
350-8135 Index - Service manual cpl. Service-Anleitung kpl.
350-7906 Index - Content Inhalt
Technische Änderungen vorbehalten
Subject to technical modification

Precisa Gravimetrics AG Index - i 1
Series 360 EP / ES Contents
Inhaltsverzeichnis
Contents / Inhaltsverzeichnis
SERVICE
MANUAL
SERIES 360 EP
SERIES 360 ES
Section A: Mechanics / Kapitel A: Mechanik - - - - - - - - A1
1. How to order spare parts / Anleitung zur Bestellung von Ersatzteilen .......... A2
2. Bottom of balance / Gehäuse Unterteil ............................................................. A4
2.1 Measuring resistor A2 / Messwiderstand A2................................................................... A5
2.2 Measuring resistor A3 / Messwiderstand A3.................................................................... A5
2.3 Measuring resistor M, C, D / Messwiderstand M, C, D .................................................... A5
3. Top of balance / Gehäuse Oberteil .................................................................... A6
3.1 Labels Series 360 EP ...................................................................................................... A7
3.2 Labels Series 360 ES ...................................................................................................... A7
4. Weighing cell / Wägezelle ................................................................................... A8
4.1 Group A2 / Gruppe A2 ..................................................................................................... A9
4.2 Group A3 / Gruppe A3 ................................................................................................... A10
4.3 Group M1 / Gruppe M1 .................................................................................................. A11
4.4 Group M2 / Gruppe M2 .................................................................................................. A12
4.5 Group C2 / Gruppe C2................................................................................................... A13
4.6 Group C3 / Gruppe C3................................................................................................... A14
4.7 Group D1 / Gruppe D1................................................................................................... A15
4.8 Group D2 / Gruppe D2................................................................................................... A16
4.9 Overview of flexure sheet repair set / Übersicht der Reparatur-Lagersets .................... A17
4.10 Overview of flexure sheets / Übersicht der Biegelager .................................................. A18
5. Weighing pan Group A / Waagschale Gruppe A ............................................ A19
6. Weighing pan 135 Group M / Waagschale 135 Gruppe M.............................. A20
6.1 Group / Gruppe M1 ........................................................................................................ A21
6.2 Group / Gruppe M2 ........................................................................................................ A21
7. Weighing pan 200 Group C,D / Waagschale 200 Gruppe C,D ....................... A22
8. Windshield EP / Windschutz EP 350-8657 ...................................................... A23
9. Windshield ES / Windschutz ES 350-8659 ...................................................... A25
10. Windshield XT / Windschutz XT 350-8517....................................................... A27
11. Windshield standard M / Windschutz standard M.......................................... A29
12. Calibration weights for 320-7140 / Kalibriergewichte für 320-7140 .............. A30
12.1 Group / Gruppe A2,A3 ................................................................................................... A30
12.2 Group / Gruppe M1 ........................................................................................................ A30
12.3 Group / Gruppe M2,C2,C3,D1,D2.................................................................................. A30
13. Power supply / Netzadapter.............................................................................. A31

Precisa Gravimetrics AG Index - i 2
Series 360 EP / ES Contents
Inhaltsverzeichnis
Section B: Electronics / Kapitel B: Elektronik - - - - - - - B1
1. Main board / Hauptprint 360-7200-020............................................................... B2
1.1 Exchange of the main board 360-7200-020..................................................................... B2
1.2 Austauschen des Hauptprintes 360-7200-020................................................................. B2
2. Connector board / Steckerprint 360-7201-010 .................................................. B3
2.1 Assembly / Bestückung 360-7201-010 ............................................................................ B3
Section C: Service - - - - - - - - - - - - - - - - - - - - - - - - - - - - C1
1. Service tools and equipment.............................................................................. C2
1.1 Tool set (350-8537)..........................................................................................................C2
1.2 Equipment........................................................................................................................ C3
2. Opening up a balance ......................................................................................... C4
2.1 General procedure for opening up a Series 360 series balance...................................... C4
3. Introduction / Preparation of the tools .............................................................. C5
3.1 Introduction ...................................................................................................................... C5
3.2 Preparation of the tools.................................................................................................... C5
4. Dismantling the weighing cell ............................................................................ C6
4.1 Removing the top of balance ........................................................................................... C6
4.2 Removing the weighing cell from the bottom of balance.................................................. C6
4.3 Removing the flexure-strap.............................................................................................. C7
4.4 Removing the two flexure holders.................................................................................... C7
4.5 Removing the coil............................................................................................................. C7
4.6 Removing the support piece ............................................................................................ C7
4.7 Removing the balance arm .............................................................................................. C7
5. Installing the new „H-flexure sheets“................................................................ C9
5.1 Removing the old „H-flexure sheets“................................................................................ C9
5.2 Installing the new „H-flexure sheets“................................................................................ C9
6. Cleaning ............................................................................................................. C10
6.1 Cleaning the pot.............................................................................................................C10
6.2 Cleaning the coil ............................................................................................................C10
6.3 Final check of cleaning................................................................................................... C10
7. Assembling the weighing cell .......................................................................... C11
7.1 Assembling the balance arm.......................................................................................... C11
7.2 Assembling the coil, the magnet cover and the transport safety device ........................ C11
7.3 Assembling the sensor mechanism and the stopper ..................................................... C12
7.4 Assembling new “V-flexure sheets“................................................................................ C12
7.5 Assembling the support piece and inner cone ............................................................... C13
7.6 Assembling the flexure holders ...................................................................................... C13
7.7 Assembling the new „flexure-strap“................................................................................ C14
7.8 Dismantling the assembly jigs........................................................................................ C15
7.9 Installing the weighing cell in the bottom of balance...................................................... C15
Section D: Adjustments - - - - - - - - - - - - - - - - - - - - - - - - D1
1. Adjustments......................................................................................................... D2
1.1 Activation of the service mode ES and EP....................................................................... D2
1.2 Set the open balance to the service mode ES or EP....................................................... D2

Precisa Gravimetrics AG Index - i 3
Series 360 EP / ES Contents
Inhaltsverzeichnis
1.3 Adjusting of the symmetry ES and EP ............................................................................. D3
1.4 Checking the pre-load ES and EP ................................................................................... D3
1.5 Checking the lowering process of the calibration weight ES............................................ D3
1.6 Checking the lowering process of the calibration weight EP............................................ D4
1.7 Adjusting the corner load ................................................................................................. D4
1.8 Final check of corner load ................................................................................................ D6
1.9 Set the closed balance to the service mode ES or EP..................................................... D6
1.10 Linearisation of the balance ............................................................................................. D7
1.11 Adjustment of the internal calibration weight.................................................................... D7
1.12 Final check of the adjustment .......................................................................................... D7
1.13 S-correction of a balance ................................................................................................. D8
2. Final check ........................................................................................................... H9
3. Error messages ................................................................................................. H10
3.1 Operating error............................................................................................................... H10
3.2 Fatal error ...................................................................................................................... H10
3.3 Hardware error ...............................................................................................................H11
4. Discussion with the manufacturer................................................................... H12

Precisa Gravimetrics AG Index - A1
Series 360 EP / ES Section A: Mechanics / Kapitel A:
Mechanik
Section A: Mechanics /
Kapitel A: Mechanik

Precisa Gravimetrics AG Index - A2
Series 360 EP / ES How to order spare parts / Anleitung zur
Bestellung von Ersatzteilen
1. How to order spare parts / Anleitung zur Bestellung von Ersatzteilen
In order to faciliate the searching of spare parts, this chapter is reorganized in groups.
The following chart shows, to which group the balance belongs, regarding the series number, the order
number and the model type.
Example:
Series 360EP
Order No. 360-9235
Model 420A-FR
Group A3
On all subordinated representations, the desired spare part is to find in group A3
Um die Suche nach dem gewünschten Ersatzteil zu erleichtern, wurde dieses Kapitel in Gruppen zu-
sammengefasst.Die nachfolgende Tabelle zeigt auf, zu welcher Gruppe die Waage anhand der Serie-,
der Bestellnummer und des Modelles zuzuordnen ist.
Beispiel :
Serie 360EP
Bestell-Nr. 360-9235
Modell 420A-FR
Gruppe A3
In allen folgenden Darstellungen ist das gewünschte Ersatzteil unter der Gruppe A3 zu finden

Precisa Gravimetrics AG Index - A3
Series 360 EP / ES How to order spare parts / Anleitung zur
Bestellung von Ersatzteilen
Series 360 ES
Order-No. Model Group
360-9102 125SM A2
360-9103 225SM-DR A2
360-9237 120A A2
360-9238 220A A2
360-9239 320A A3
360-9240 420A A3
360-9241 420A-FR A3
360-9242 620A-DR A3
360-9352 320M M1
360-9353 620M M1
360-9354 920M M2
360-9355 1220M M2
360-9356 620M-FR M1
360-9357 1220M-FR M2
360-9358 3220M-DR M2
360-9444 1200C C2
360-9445 2200C C2
360-9446 4200C C3
360-9447 6200C C3
360-9448 8200C C3
360-9449 6200C-FR C3
360-9450 8200C-DR C3
360-9537 6200D D1
360-9538 8200D D2
360-9539 12200D D2
360-9614 12200G D2
Series 360 EP
Order-No. Model Group
360-9100 125SM A2
360-9101 225SM-DR A2
360-9231 120A A2
360-9232 220A A2
360-9233 320A A3
360-9234 420A A3
360-9235 420A-FR A3
360-9236 620A-DR A3
360-9345 320M M1
360-9346 620M M1
360-9347 920M M2
360-9348 1220M M2
360-9349 620M-FR M1
360-9350 1220M-FR M2
360-9351 3220M-DR M2
360-9437 1200C C2
360-9438 2200C C2
360-9439 4200C C3
360-9440 6200C C3
360-9441 8200C C3
360-9442 6200C-FR C3
360-9443 8200C-DR C3
360-9534 6200D D1
360-9535 8200D D2
360-9536 12200D D2
360-9613 12200G D2

Precisa Gravimetrics AG Index - A4
Series 360 EP / ES Bottom of balance / Gehäuse Unterteil
2. Bottom of balance / Gehäuse Unterteil

Precisa Gravimetrics AG Index - A5
Series 360 EP / ES Bottom of balance / Gehäuse Unterteil
* Approved balances only / nur eichfähige Waagen
**Analytical- and Semi-micro balances only / nur Analyse- und Semimicrowaagen
2.1 Measuring resistor A2 / Messwiderstand A2
2.2 Measuring resistor A3 / Messwiderstand A3
2.3 Measuring resistor M, C, D / Messwiderstand M, C, D
Key-No. Part-No. Description Bezeichnung
1 320-3069 Blind plug Blindzapfen
2 320-7139 Servo-motor compl. Servomotor kpl.
3 320-7140 Calibration compl. Kalibrierung kpl.
4 360-2002 * Calibration plate Eichplatte
5 360-7000 Housing‘s bottom Gehäuse Unterteil
6 360-7004 Levelling screw compl. Stellfuss kpl
7 360-7013 Graphic display EP series Grafikdisplay Serie EP
8 360-7200-020 Main board → page B2 Hauptprint → page B2
9 360-7201-010 Connector board → page B3 Steckerprint → page B3
10 360-8009 Slide-in module standard RS 232 Einschub Standard RS 232
11 MW 2075-003 Sealing lenght 85mm Dichtung Länge 85mm
12 PN 1100-041 Screw M4x5 ZS-Schraube M4x5
13 PN 1100-061 Screw M3x6 ZK-Schraube M3x6
14 PN 1100-062 Screw M3x8 ZK-Schraube M3x8
15 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
16 PN 1100-176 ** Screw M4x12 ZS-Schraube M4x12
17 PN 1500-098 Spring washer 10x5.2x0.25 Cr Tellerfeder 10x5.2x0.25 Cr
18 PN 3260-027 LCD Display ES series LCD Display Serie ES
19 PN 3329-XXX Measuring resistor
see chart below
Messwiderstand
siehe Tabelle unten
20 PN 3730-004 Levelling unit Libelle
19 PN 3329-032 Measuring resistor 250 Ohm Messwiderstand 250 Ohm
19 PN 3329-031 Measuring resistor 150 Ohm Messwiderstand 150 Ohm
19 PN 3329-028 Measuring resistor 51 Ohm Messwiderstand 51 Ohm

Precisa Gravimetrics AG Index - A6
Series 360 EP / ES Top of balance / Gehäuse Oberteil
3. Top of balance / Gehäuse Oberteil
* set of 20 pieces / Set mit 20 Stück
**Analytical- and Semi-micro balances only / nur Analyse- und Semimicrowaagen
Key-No. Part-No. Description Bezeichnung
1 360-4000 Keypad EP Folientastatur EP
2 360-4001 Keypad ES Folientastatur ES
3 350-8676 *
350-8663 *
Dustcover A/SM
Dustcover M/C/D
Staubschutz A/SM
Staubschutz M/C/D
4 page A 7 Label Typenschild
5 360-4008 Glass Displayglas
6 360-7011
360-7017
Top of balance M/C/D
Top of balance A/SM
Gehäuse Oberteil M/C/D
Gehäuse Oberteil A/SM
7 MW 2075-003 ** Sealing lenght 1055mm Dichtung Länge 1055mm
8 MW 2075-003 ** Sealing lenght 215mm Dichtung Länge 215mm
9 PN 1053-012 Blind plug Abdeckkappe
10 PN 1053-014 ** Blind plug Schutzstopfen
11 PN 1100-227 Screw M4x25 ZK-Schraube M4x25

Precisa Gravimetrics AG Index - A7
Series 360 EP / ES Top of balance / Gehäuse Oberteil
3.1 Labels Series 360 EP 3.2 Labels Series 360 ES
360-7009-001 EP 125SM
360-7009-002 EP 160SM
360-7009-003 EP 125SM-FR
360-7009-004 EP 225SM-DR
360-7009-005 EP 120A
360-7009-006 EP 220A
360-7009-007 EP 320A
360-7009-008 EP 420A
360-7009-009 EP 420A-FR
360-7009-010 EP 620A-DR
360-7009-011 EP 320M
360-7009-012 EP 620M
360-7009-013 EP 920M
360-7009-014 EP 1220M
360-7009-015 EP 620M-FR
360-7009-016 EP 1220M-FR
360-7009-017 EP 3220M-DR
360-7009-018 EP 1220C
360-7009-019 EP 2200C
360-7009-020 EP 4200C
360-7009-021 EP 6200C
360-7009-022 EP 8200C
360-7009-023 EP 6200C-FR
360-7009-024 EP 8200C-DR
360-7009-025 EP 6200D
360-7009-026 EP 8200D
360-7009-027 EP 12200D
360-7009-028 EP 12200G
360-7010-001 ES 125SM
360-7010-002 ES 160SM
360-7010-003 ES 125SM-FR
360-7010-004 ES 225SM-DR
360-7010-005 ES 120A
360-7010-006 ES 220A
360-7010-007 ES 320A
360-7010-008 ES 420A
360-7010-009 ES 420A-FR
360-7010-010 ES 620A-DR
360-7010-011 ES 320M
360-7010-012 ES 620M
360-7010-013 ES 920M
360-7010-014 ES 1220M
360-7010-015 ES 620M-FR
360-7010-016 ES 1220M-FR
360-7010-017 ES 3220M-DR
360-7010-018 ES 1220C
360-7010-019 ES 2200C
360-7010-020 ES 4200C
360-7010-021 ES 6200C
360-7010-022 ES 8200C
360-7010-023 ES 6200C-FR
360-7010-024 ES 8200C-DR
360-7010-025 ES 6200D
360-7010-026 ES 8200D
360-7010-027 ES 12200D
360-7010-028 ES 1220G

Precisa Gravimetrics AG Index - A8
Series 360 EP / ES Weighing cell / Wägezelle
4. Weighing cell / Wägezelle

Precisa Gravimetrics AG Index - A9
Series 360 EP / ES Weighing cell / Wägezelle
4.1 Group A2 / Gruppe A2
* set of 10 pieces / Set mit 10 Stück
Key-No. Part-No. Description Bezeichnung
1 240-4048 Symmetry screw Symmetrieschraube
2 280-2003 Stopper Anschlag
3 350-8325 * Connecting wire set; 10pcs Bronzeband Set; 10stk
4 320-2004 Flexure holder Lenker
5 page A 17 Flexure strap Be 1.2mm Zugband Be 1.2mm
6 320-2032 Transport safety device Transportsicherung
7 page A 17 Flexure sheet Be 2mm Hängelager Be 2mm
8 page A 17 Flexure sheet Be 3mm Biegelager Be 3mm
9 320-2048 Magnet cover Magnettopfdeckel
11 320-3055 Base Beilage
12 320-3056 Preload weight Vorlastgewicht XR
13 320-3067 Insert Gewindebüchse
14 320-3070 Differential set screw Differential Gewindestift
15 320-3080 Cover air draft Deckel Luftzug
16 320-3081 Corner load bush Eckenlastbuchse
17 320-7130 Inner cone round Innenkonus rund
18 320-7145 Weight holder left compl. Gewichtslager links kpl.
19 320-7147 Weight holder right compl. Gewichtslager rechts kpl.
20 360-7036 Balance arm 1:4.5 compl. Waagbalken 1:4.5 kpl.
21 360-7031 Support piece 1:4.5 compl. Träger 1:4.5 kpl.
22 360-2001 Cover holder Deckelträger
23 360-5002 Chassis Chassis
24 360-7005 Sensor mechanism compl. Lichtschranke kpl.
25 F2-152 Spring Feder
26 PN 1100-039 Screw M3x5 ZS-Schraube M3x5
27 PN 1100-040 Screw M3x8 ZS-Schraube M3x8
28 PN 1100-061 Screw M3x6 ZK-Schraube M3x6
29 PN 1100-106 Screw M3x5 SS-Schraube M3x5 kl. Kopf
30 PN 1100-169 Screw M4x6 ZL-Schraube M4x6
31 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
32 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
33 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
34 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
35 PN 1100-266 Screw M3x10 ZS-Schraube M3x10
36 PN 1100-286 Screw M3x10 SS-Schraube M4x6 kl. Kopf
37 PN 1500-075 Spring washer M4 Tellerfeder M4
38 PN 1500-097 Washer M4 Ms U-Scheibe M4 Ms

Precisa Gravimetrics AG Index - A10
Series 360 EP / ES Weighing cell / Wägezelle
4.2 Group A3 / Gruppe A3
* set of 10 pieces / Set mit 10 Stück
Key-No. Part-No. Description Bezeichnung
1 240-4048 Symmetry screw Symmetrieschraube
2 280-2003 Stopper Anschlag
3 350-8325 * Connecting wire set; 10pcs Bronzeband Set; 10stk
4 320-2004 Flexure holder Lenker
5 page A 17 Flexure strap Be 1.2mm Zugband Be 1.2mm
6 320-2032 Transport safety device Transportsicherung
7 page A 17 Flexure sheet Be 2mm Hängelager Be 2mm
8 page A 17 Flexure sheet Be 3mm Biegelager Be 3mm
9 320-2048 Magnet cover Magnettopfdeckel
11 320-3055 Base Beilage
12 320-3056 Preload weight Vorlastgewicht XR
13 320-3067 Insert Gewindebüchse
14 320-3070 Differential set screw Differential Gewindestift
15 320-3080 Cover air draft Deckel Luftzug
16 320-3081 Corner load bush Eckenlastbuchse
17 320-7130 Inner cone round Innenkonus rund
18 320-2076 Weight holder left Gewichtslager links
19 320-2077 Weight holder right Gewichtslager rechts
20 360-7038 Balance arm 1:6 compl. Waagbalken 1:6 kpl.
21 360-7032 Support piece 1:6 compl. Träger 1:6 kpl.
22 360-2001 Cover holder Deckelträger
23 360-5002 Chassis Chassis
24 360-7005 Sensor mechanism compl. Lichtschranke kpl.
25 F2-152 Spring Feder
26 PN 1100-039 Screw M3x5 ZS-Schraube M3x5
27 PN 1100-040 Screw M3x8 ZS-Schraube M3x8
28 PN 1100-061 Screw M3x6 ZK-Schraube M3x6
29 PN 1100-106 Screw M3x5 SS-Schraube M3x5 kl. Kopf
30 PN 1100-169 Screw M4x6 ZL-Schraube M4x6
31 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
32 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
33 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
34 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
35 PN 1100-266 Screw M3x10 ZS-Schraube M3x10
36 PN 1100-286 Screw M3x10 SS-Schraube M4x6 kl. Kopf
37 PN 1500-075 Spring washer M4 Tellerfeder M4
38 PN 1500-097 Washer M4 Ms U-Scheibe M4 Ms

Precisa Gravimetrics AG Index - A11
Series 360 EP / ES Weighing cell / Wägezelle
4.3 Group M1 / Gruppe M1
* set of 10 pieces / Set mit 10 Stück
Key-No. Part-No. Description Bezeichnung
1 240-4048 Symmetry screw Symmetrieschraube
2 280-2003 Stopper Anschlag
3 350-8325 * Connecting wire set; 10pcs Bronzeband Set; 10stk
4 320-2004 Flexure holder Lenker
5 page A 17 Flexure strap Th 1.2mm Zugband Th 1.2mm
6 320-2032 Transport safety device Transportsicherung
7 page A 17 Flexure sheet Th 3mm Hängelager Th 3mm
8 page A 17 Flexure sheet Th 3mm Biegelager Th 3mm
9 320-2048 Magnet cover Magnettopfdeckel
10 320-3013 Base Beilage
11 PN 1500-075 Spring washer M4 Tellerfeder M4
14 360-3000 Corner load screw Eckenlastschraube
17 360-5003 Inner cone 4kt Innenkonus 4kt
18 320-2076 Weight holder left Gewichtslager links
19 320-2077 Weight holder right Gewichtslager rechts
20 360-7038 Balance arm 1:6 compl. Waagbalken 1:6 kpl.
21 360-7032 Support piece 1:6 compl. Träger 1:6 kpl.
23 360-5002 Chassis Chassis
24 360-7005 Sensor mechanism compl. Lichtschranke kpl.
25 F2-152 Spring Feder
26 PN 1100-039 Screw M3x5 ZS-Schraube M3x5
27 PN 1100-040 Screw M3x8 ZS-Schraube M3x8
30 PN 1100-169 Screw M4x6 ZL-Schraube M4x6
31 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
32 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
33 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
34 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
36 PN 1100-286 Screw M3x10 SS-Schraube M4x6 kl. Kopf
37 PN 1500-075 Spring washer M4 Tellerfeder M4
38 PN 1500-075 Spring washer M4 Tellerfeder M4

Precisa Gravimetrics AG Index - A12
Series 360 EP / ES Weighing cell / Wägezelle
4.4 Group M2 / Gruppe M2
* set of 10 pieces / Set mit 10 Stück
Key-No. Part-No. Description Bezeichnung
1 240-4048 Symmetry screw Symmetrieschraube
2 280-2003 Stopper Anschlag
3 350-8325 * Connecting wire set; 10pcs Bronzeband Set; 10stk
4 320-2004 Flexure holder Lenker
5 page A 17 Flexure strap Th 1.2mm Zugband Th 1.2mm
6 320-2032 Transport safety device Transportsicherung
7 page A 17 Flexure sheet Th 3mm Hängelager Th 3mm
8 page A 17 Flexure sheet Th 3mm Biegelager Th 3mm
9 320-2048 Magnet cover Magnettopfdeckel
10 320-3013 Base Beilage
11 PN 1500-075 Spring washer M4 Tellerfeder M4
14 360-3000 Corner load screw Eckenlastschraube
17 360-5003 Inner cone 4kt Innenkonus 4kt
18 320-2076 Weight holder left Gewichtslager links
19 320-2077 Weight holder right Gewichtslager rechts
20 360-7040 Balance arm 1:12 compl. Waagbalken 1:12 kpl.
21 360-7033 Support piece 1:12 compl. Träger 1:12 kpl.
23 360-5002 Chassis Chassis
24 360-7005 Sensor mechanism compl. Lichtschranke kpl.
25 F2-152 Spring Feder
26 PN 1100-039 Screw M3x5 ZS-Schraube M3x5
27 PN 1100-040 Screw M3x8 ZS-Schraube M3x8
30 PN 1100-169 Screw M4x6 ZL-Schraube M4x6
31 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
32 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
33 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
34 PN 1100-173 Screw M4x16 ZL-Schraube M4x16
36 PN 1100-286 Screw M3x10 SS-Schraube M4x6 kl. Kopf
37 PN 1500-075 Spring washer M4 Tellerfeder M4
38 PN 1500-075 Spring washer M4 Tellerfeder M4

Precisa Gravimetrics AG Index - A13
Series 360 EP / ES Weighing cell / Wägezelle
4.5 Group C2 / Gruppe C2
* set of 10 pieces / Set mit 10 Stück
Key-No. Part-No. Description Bezeichnung
1 240-4048 Symmetry screw Symmetrieschraube
2 280-2003 Stopper Anschlag
3 350-8325 * Connecting wire set; 10pcs Bronzeband Set; 10stk
4 320-2004 Flexure holder Lenker
5 page A 17 Flexure strap Th 1.6mm Zugband Th 1.6mm
6 320-2032 Transport safety device Transportsicherung
7 page A 17 Flexure sheet Th 3mm Hängelager Th 3mm
8 page A 17 Flexure sheet Th 3mm Biegelager Th 3mm
9 320-2048 Magnet cover Magnettopfdeckel
10 320-3013 Base Beilage
11 PN 1500-075 Spring washer M4 Tellerfeder M4
14 360-3000 Corner load screw Eckenlastschraube
17 360-5003 Inner cone 4kt Innenkonus 4kt
18 320-2076 Weight holder left Gewichtslager links
19 320-2077 Weight holder right Gewichtslager rechts
20 360-7039 Balance arm 1:12 compl. Waagbalken 1:12 kpl.
21 360-7033 Support piece 1:12 compl. Träger 1:12 kpl.
23 360-5002 Chassis Chassis
24 360-7005 Sensor mechanism compl. Lichtschranke kpl.
25 F2-152 Spring Feder
26 PN 1100-039 Screw M3x5 ZS-Schraube M3x5
27 PN 1100-040 Screw M3x8 ZS-Schraube M3x8
30 PN 1100-169 Screw M4x6 ZL-Schraube M4x6
31 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
32 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
33 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
34 PN 1100-173 Screw M4x16 ZL-Schraube M4x16
36 PN 1100-286 Screw M3x10 SS-Schraube M4x6 kl. Kopf
37 PN 1500-075 Spring washer M4 Tellerfeder M4
38 PN 1500-075 Spring washer M4 Tellerfeder M4

Precisa Gravimetrics AG Index - A14
Series 360 EP / ES Weighing cell / Wägezelle
4.6 Group C3 / Gruppe C3
* set of 10 pieces / Set mit 10 Stück
Key-No. Part-No. Description Bezeichnung
1 240-4048 Symmetry screw Symmetrieschraube
2 280-2003 Stopper Anschlag
3 350-8325 * Connecting wire set; 10pcs Bronzeband Set; 10stk
4 320-2004 Flexure holder Lenker
5 page A 17 Flexure strap Th 1.6mm Zugband Th 1.6mm
6 320-2032 Transport safety device Transportsicherung
7 page A 17 Flexure sheet Th 3mm Hängelager Th 3mm
8 page A 17 Flexure sheet Th 6mm Biegelager Th 6mm
9 320-2048 Magnet cover Magnettopfdeckel
10 320-3013 Base Beilage
11 PN 1500-075 Spring washer M4 Tellerfeder M4
14 360-3000 Corner load screw Eckenlastschraube
17 360-5003 Inner cone 4kt Innenkonus 4kt
18 320-2076 Weight holder left Gewichtslager links
19 320-2077 Weight holder right Gewichtslager rechts
20 360-7041 Balance arm 1:36 compl. Waagbalken 1:36 kpl.
21 360-7034 Support piece 1:36 compl. Träger 1:36 kpl.
23 360-5002 Chassis Chassis
24 360-7005 Sensor mechanism compl. Lichtschranke kpl.
25 F2-152 Spring Feder
26 PN 1100-039 Screw M3x5 ZS-Schraube M3x5
27 PN 1100-040 Screw M3x8 ZS-Schraube M3x8
30 PN 1100-169 Screw M4x6 ZL-Schraube M4x6
31 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
32 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
33 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
34 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
36 PN 1100-286 Screw M3x10 SS-Schraube M4x6 kl. Kopf
37 PN 1500-075 Spring washer M4 Tellerfeder M4
38 PN 1500-075 Spring washer M4 Tellerfeder M4

Precisa Gravimetrics AG Index - A15
Series 360 EP / ES Weighing cell / Wägezelle
4.7 Group D1 / Gruppe D1
* set of 10 pieces / Set mit 10 Stück
Key-No. Part-No. Description Bezeichnung
1 240-4048 Symmetry screw Symmetrieschraube
2 280-2003 Stopper Anschlag
3 350-8325 * Connecting wire set; 10pcs Bronzeband Set; 10stk
4 320-2004 Flexure holder Lenker
5 page A 17 Flexure strap Th 1.6mm Zugband Th 1.6mm
6 320-2032 Transport safety device Transportsicherung
7 page A 17 Flexure sheet Th 6mm Hängelager Th 6mm
8 page A 17 Flexure sheet Th 6mm Biegelager Th 6mm
9 320-2048 Magnet cover Magnettopfdeckel
10 320-3013 Base Beilage
11 PN 1500-075 Spring washer M4 Tellerfeder M4
14 360-3000 Corner load screw Eckenlastschraube
17 360-5003 Inner cone 4kt Innenkonus 4kt
18 320-2076 Weight holder left Gewichtslager links
19 320-2077 Weight holder right Gewichtslager rechts
20 360-7041 Balance arm 1:36 compl. Waagbalken 1:36 kpl.
21 360-7034 Support piece 1:36 compl. Träger 1:36 kpl.
23 360-5002 Chassis Chassis
24 360-7005 Sensor mechanism compl. Lichtschranke kpl.
25 F2-152 Spring Feder
26 PN 1100-039 Screw M3x5 ZS-Schraube M3x5
27 PN 1100-040 Screw M3x8 ZS-Schraube M3x8
30 PN 1100-169 Screw M4x6 ZL-Schraube M4x6
31 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
32 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
33 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
34 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
36 PN 1100-286 Screw M3x10 SS-Schraube M4x6 kl. Kopf
37 PN 1500-075 Spring washer M4 Tellerfeder M4
38 PN 1500-075 Spring washer M4 Tellerfeder M4

Precisa Gravimetrics AG Index - A16
Series 360 EP / ES Weighing cell / Wägezelle
4.8 Group D2 / Gruppe D2
* set of 10 pieces / Set mit 10 Stück
Key-No. Part-No. Description Bezeichnung
1 240-4048 Symmetry screw Symmetrieschraube
2 280-2003 Stopper Anschlag
3 350-8325 * Connecting wire set; 10pcs Bronzeband Set; 10stk
4 320-2004 Flexure holder Lenker
5 page A 17 Flexure strap Th 1.6mm Zugband Th 1.6mm
6 320-2032 Transport safety device Transportsicherung
7 page A 17 Flexure sheet Th 6mm Hängelager Th 6mm
8 page A 17 Flexure sheet Th 6mm Biegelager Th 6mm
9 320-2048 Magnet cover Magnettopfdeckel
10 320-3013 Base Beilage
11 PN 1500-075 Spring washer M4 Tellerfeder M4
14 360-3000 Corner load screw Eckenlastschraube
17 360-5003 Inner cone 4kt Innenkonus 4kt
18 320-2076 Weight holder left Gewichtslager links
19 320-2077 Weight holder right Gewichtslager rechts
20 360-7042 Balance arm 1:60 compl. Waagbalken 1:60 kpl.
21 360-7035 Support piece 1:60 compl. Träger 1:60 kpl.
23 360-5002 Chassis Chassis
24 360-7005 Sensor mechanism compl. Lichtschranke kpl.
25 F2-152 Spring Feder
26 PN 1100-039 Screw M3x5 ZS-Schraube M3x5
27 PN 1100-040 Screw M3x8 ZS-Schraube M3x8
30 PN 1100-169 Screw M4x6 ZL-Schraube M4x6
31 PN 1100-170 Screw M4x8 ZL-Schraube M4x8
32 PN 1100-171 Screw M4x10 ZL-Schraube M4x10
33 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
34 PN 1100-172 Screw M4x12 ZL-Schraube M4x12
36 PN 1100-286 Screw M3x10 SS-Schraube M4x6 kl. Kopf
37 PN 1500-075 Spring washer M4 Tellerfeder M4
38 PN 1500-075 Spring washer M4 Tellerfeder M4