Prem-I-Air l KY-44B User manual

1
15 50 00 00 0B BT TU U M MO OB BI IL LE E A AI IR R C CO ON ND DI IT TI IO ON NE ER R
I
IN NS ST TR RU UC CT TI IO ON N M MA AN NU UA
AL L
M
Mo od de el l K KY Y- -4 44 4B B
IMPORTANT
Please read these instructions carefully before use.
HSS2062 (P12A)

- 3 -
I
Im mp po or rt ta an nt t S Sa af fe et ty y I In ns st tr ru uc ct ti io on ns s
Read and save these important safety instructions before using this
unit. When using electrical appliances, basic safety precautions
should always be followed including the following:
1. Transport & store the unit in an upright position only. Leave it in an
upright position for at least 3 hours before first use.
2. Always place the unit on an even, level surface.
3. An opening in a window or wall is required to accommodate the
exhaust hose to expel the hot air.
4. Make sure the unit is connected to an earthed power supply of the
correct rating. (Refer to the rating label located at the back of the
unit).
5. The unit will cool when the room temperature is between 18°C~32°C
depending on the thermostat setting.
6. Operate this unit in an ambient temperature of 32°C or lower.
7. DO NOT use this unit for functions other than those described in this
instruction manual.
8. DO NOT tilt the unit.
9. DO NOT cover or obstruct the appliance’s inlet and outlet grilles.
10. Your air conditioner has been designed to be used only in the home,
office and similar conditions and should not be used for any other
purpose.
11. Never unplug the air conditioner while it is working, this could damage
the electronic circuits.
12. DO NOT use the appliance in a wet room, such as a bathroom or
laundry room to avoid the risk of electrical shocks.
13. Do not bend or crush the warm air exhaust hose.
14. DO NOT sit or place articles on the appliance.
15. DO NOT use the appliance with wet or damp hands.
16. DO NOT let chemical substances come into contact with the
appliance.
17. DO NOT use the appliance in the presence of flammable substances
or vapours such as alcohol, insecticides, petrol, etc.
18. DO NOT use the plug to start and stop the appliance. ALWAYS use
the control panel to start and stop the unit.
19. ALWAYS keep an air path of at least 50cm from walls, furniture or
curtains.
20. ALWAYS turn off the appliance when it is not in use and remove the
mains plug from the socket outlet.

- 4 -
21. ALWAYS turn the unit off and remove the mains plug before cleaning,
carrying out maintenance or moving location.
22. Avoid the use of adapter plugs, multiple sockets and /or extension
leads. If their use is necessary, ensure they conform to current safety
standards.
23. Do not pull the electrical cable or place it near a source of heat:
always unroll it completely to avoid dangerous overheating. If the
supply cord becomes damaged, the service agent or a similarly
qualified person must replace it, in order to avoid a hazard.
24. The filter must be used with the product at all times, when removing it
for clearing always turn the unit off and unplug the mains plug from
the socket.
25. Do not operate the fan with a damaged power cord or plug, after it
malfunctions, has been dropped or damaged. If the power cord is
damaged it must be replaced by the manufacturer or a qualified
service engineer to avoid a hazard.
For those who are not aware of the danger that might occur from the
usage of an electrical appliance, they should use the product under
guidance and supervision.
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY, IF
THE ABOVE INSTRUCTIONS ARE NOT FOLLOWED.

- 7 -
E
En ne er rg gy y S Sa av vi in ng g A Ad dv vi ic ce e
1. Do not locate the air conditioner where furniture or other objects
can obstruct the airflow.
2. Keep blinds/curtains closed during the warmest part of the day.
3. Close the fireplace damper, floor and/or wall grilles, so cool air
does not escape through the chimney or ductwork.
4. Keep the filters clean.
5. Avoid opening doors frequently.
6. Each person present in a room provides between 100 & 150Watts
of heat, consequently, the more people there are in the room, the
less effective the unit will be in cooling.
7. Set the unit to maximum cooling and high-speed ventilation for
the initial start up and then adjust the unit to a comfortable
setting.

- 9 -
C
Co on nt tr ro ol l P Pa an ne el l

- 13 -
U
Us se e o of f C Co on nt tr ro ol l P Pa an ne el l
(continued)
7. Timer operation
1. Press “Timer” button to set Automatic Off time while the unit is
running.
2. Press “Timer” button to set Automatic On time while the unit is
standby.
3. The adjustable time range is 1-12 hours by hour.
8. Swing operation
1. Press “Swing” button to change airflow direction. The unit default
setting is straight airflow.
2. Press “Swing” button once, the airflow direction will change to
swing at 120Oright-left.
9. Sleep operation
1. Sleep operation works in Cooling mode.
2. Press “Sleep” button, the unit runs in Sleep mode, the upper fan
turns to low speed automatically. The set temperature increases by
1OC per hour for up to 8 hours.
3. The unit turns off after 8 hours running in Sleep mode.

- 18 -
M
Ma ai in nt te en na an nc ce e
Before carrying out ANY maintenance works ensure the
appliance is switched off and the three-pin plug is removed
from the power socket.
Filter maintenance
Take out air filter cover from back air inflow vent.
Clean, wash the air filter by immersing it gently into warm water with a
neutral detergent, rinse the filter of detergent and dry it thoroughly in a
shaded place.
Allow the filter to dry naturally before returning to the air filter cover.
How to draining excess condenser water
When unit running at cooling mode, the unit automatically dehumidifies the
air in the room. The water from dehumidification is stored in a collecting
water tray and then immediately “evaporated” and evacuated via the warm
air outlet duct. However, when it is extremely humid, the collecting tank
may fill up. In this case the alarm Buzzer will sound 20 times while water
tray gets full, error code “E4” will display in LED panel and cooling system
stops automatically, and fan will stop in 3 minutes automatically as well.
To re-set the unit and drain the condensed water, please follow the
instructions below.
A. Water Tank Drainage
1. Horizontally place water tray under drainage hole.
2. Disconnect the rubber plug from drainage pipe, condensed water will
flow out.
3. When the water tray gets full, push rubber plug back to drainage hole,
and empty water tray.
4. Repeat 1,2,3 until all condensed water in the unit is drained.

- 19 -
M
Ma ai in nt te en na an nc ce e
(continued)
B. Continuous drainage
This unit can be used with a permanent drain connection. If you use this
unit frequently, please connect the pipe to the unit as shown below so that
the unit can drain the water continuously.
1. Disconnect the rubber plug from continuous drainage pipe. Store the
disconnected rubber plug for later use.
2. Connect supplied drainage pipe to drainage hole, condensed water will
flow out.
3. If you want to extend drainage pipe, you can use 18mm (inside
diameter) plastic pipe and connect with the supplied drainage pipe.