Premium PRN7005HW User manual

Service Manual
Important Safeguards
PRN7006HS
PRN7005HW

2
TABLE OF CONTENTS
Specification
3
Safety Precautions
3
The Cooling System
4
Wire Diagram
5
Changing the Reversing Door
5
Changing the Bulb
8
Trouble Shooting
8

3
SPECIFICATION
Models
Capacity
Power Supply 11 V/60Hz
Rated Input Power 1 0 W
Rated Current 1. A
Rated Power of Lamp 10 W
Refrigerant/Amount R600a /
Net Weight
Unit Dimension (HxWxD) x x
Package Dimension (HxWxD) x x
Loading QTY(40HQ) pcs
SAFETY PRECAUTIONS
The installation of this appliance is best carried out by 2 people.
Dispose of all packaging carefully and responsibly.
The appliance is designed for indoor use only and must be protected from rain, moisture
and extreme temperature variations.
This appliance is designed for household use. Do not use the appliance for industrial and
commercial use, or any other purpose.
The appliance MUST be positioned on a firm level base.
Do not splash water on the appliance. It may cause electrical parts to fail and result in an
electric shock.
Leave the appliance in its intended place of installation and in its correct orientation for at
least 4 hours before switching on to allow the cooling system to settle before first use or
after any transportation.
This appliance is an environmental friendly product and it contains non CFC / HFC gas
substances in the cooling system (Called R600a) and in the insulation (Called
cyclopentane) which are potentially flammable if exposed to fire. Therefore, take care not
to damage, the cooling circuit / pipes of the appliance in transportation and in use. In case
of damage do not expose the appliance to fire, potential ignition source and immediately
ventilate the room where the appliance is situated.
Do not sit, stand or place any other heavy objects on top of the appliance. This could
result in injury or damage tothe appliance.
Do not allow children to play with the appliance to avoid the risk of entrapment and
suffocation.
PRN7005HW PRN7006HS
7.0 CU.FT
4
1.8 Oz
101 Lbs
54.5
57.55
130
62.2 146.2
59.3 141.7










4
Keep ventilation opening, in the appliance enclosure or in the built-in structure, clear of
obstruction
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use the
appliance safely. Young children should be supervised to ensure that they do not play
with the appliance.
Do not use mechanical, electrical or chemical way to speed up the defrost process not
recommended by the manufacturer.
Do not use or place other electrical products inside the appliance not recommended by
the manufacturer.
Do not store liquids in glass containers in the freezer compartment as these may shatter.
Do not store flammable materials such as alcohol, gasoline, LP gas or glue etc in the
appliance.
In case there is an inflammable gas leaking, open the window for air circulation and do
not pull out the plug or turn the temperature knob. Do not touch the appliance until the
valve of gas is turned off. Otherwise, sparks may happen.
COOLING SYSTEM
Dew removal
Dew removalDew removalDew removal
Gas return
Gas returnGas returnGas return
Drier
DrierDrierDrier
Capillary
CapillaryCapillaryCapillary
Compressor
CompressorCompressorCompressor
Process
ProcessProcessProcess
Evaporator
EvaporatorEvaporatorEvaporator
Fan
FanFanFan








Left Condensor
Right Condensor
Drier Tube

5
WIRE DIAGRAM
CHANGING THE REVERSING DOOR
Before reversing the door swing, ensure the appliance is unplugged and empty. Provide
additional support for the doors while hinges are being removed.
Do not depend on the door magnets to hold the door in place. It is recommended that two
people perform this task. DO NOT lay the appliance completely flat as this may damage the
coolant system.
TOOLS REQUIRED
Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Tilt the unit slightly towards the rear and
prop it securely. Two people are
required to tilt the unit during the door
reversal process.

6
2.Remove two screw cover on the front plate.
3. Unscrew the hinge and then remove upper door and place it on a soft pad to
avoid scratch.
4. Remove the pin with a screwdriver and flip the hinge bracket. Then refit the pin
to hinge bracket.
unscrew
5. Unscrew middle hinge. Then lift lower door and place it on a soft pad to avoid
scratch.
6. Move the hinge hole covers from left side to right side.

7
8. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
Unscrew Screw
7. Unscrew bottom hinge. Then remove the adjustable feet from both side.
9. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.
Transfer the lower door to the property position.
10. Make the middle hinge reverse the direction180oC, then transfer it to
the left property position. Make the middle hinge pin in the upper hole of the lower
door, then tight the bolts.
11. Place the upper door back on. Ensure the door is aligned
horizontally and vertically so that the seal are closed on all sides before finally
tightening the top hinge. Then inert the hinge and screw it to the front of the unit.
12. Fix the screw cover.

8
REPLACING THE BULB
Unplug the AC power cord from the wall.
Remove the screw that holds the light bulb cover.
Remove the light bulb cover.
Unscrew the bulb.
Replace with a 10 watt bulb that is the same shape and size.
Replace the light bulb cover
TROUBLESHOOTING GUIDE
The temperature of freezer and refrigerator
PROBLEM POSSIBLE CAUSE
Fan no work
No defrost.Freezer room temperature
no enough cold and refrigerator room
OK and open the cover board of are
duct and find ice formation on evaporator
are no enough cold and the temperature no
change by adjusting the potentiometer
(thermostat)
Compressor no starting
Compressor no starting
Product no any work
The drainpipe contain impurity
The sensor failure or PCB failure
The defrost heater is break or PCB failure
The potentiometer failure
The sensor failure
No problem
PCB failure
Compressor wire not right or compressor damage
The PCB failure
The fan motor fails;
Replace it with a new one







Manual de mantenimiento
Precauciones importantes