Pressalit Care R8400 User manual

R8400
R8401
R8402
R8403
Nursing bench 1000 – Operation and maintenance manual en
Bruseplejebriks 1000 – Brugs- og vedligeholdelsesvejledning dk
Dusch- und Pflegeliege 1000 – Gebrauchs- und Pegeanleitung de
Table de douche 1000 – Manuel d’utilisation et d’entretien fr
Verpleegbank 1000 – Gebruiks- en onderhoudshandleiding nl
Duschbrits 1000 – Bruks- och underhållsanvisning sv
Dusjstellebord 1000 – Bruks- og vedlikeholdsveiledning no
Camilla de ducha 1000 - Instrucciones de uso y mantenimiento es
󳈺 - 操作和维护手册 中文

English ................................................................. 3
Dansk ................................................................. 21
Deutsch ............................................................... 38
Français ............................................................... 55
Nederlands ............................................................ 72
Svenska................................................................ 89
Norsk................................................................. 106
Español............................................................... 123
中文 ............................................................ 140
en The guarantee covers faults or defects in material or manufacture within a period of 3 years. Products
are subject to minor technical modifications and design deviations. E. & O.E.
dk Garantien dækker i 3 år fra fakturadato for materiale- og fabrikationsfejl. Der tages forbehold for tryk-
fejl, tekniske ændringer og modelafvigelser.
de Die Garantie gilt für drei Jahre ab Rechnungsdatum für Material- und Herstellungsfehler. Druckfehler,
technische Änderungen und Modellabweichungen vorbehalten.
fr La garantie couvre les vices de fabrication et de matériaux pour une durée de 3 ans à partir de la date
de facturation. Sous réserve de modifications techniques et d’erreurs d’impression.
nl De garantie is tot 3 jaar na factuurdatum geldig voor materiaal- en fabricagefouten. Onder voorbe-
houd van drukfouten, technische wijzigingen en modelafwijkingen.
sv Garantin gäller i 3 år från fakturadatum för material- och fabrikationsfel. Med reservation för tryckfel,
tekniska ändringar och modellavvikelser.
no Garantien gjelder i 3 år fra fakturadato for material- og fabrikasjonsfeil. Med forbehold for trykkfeil,
tekniske endringer og modellforskjeller.
es La garantía cubre fallos de material o fabricación durante los tres años posteriores a partir de la fecha
de factura. Mantenemos reservas en caso de problemas de presión, modificaciones técnicas y variaci-
ones de modelo.
中文 保修涵盖 3 年内出现的材料或制造故障或缺陷。产品的技术和设计可能稍微发生变化，恕不另行通知。

3
en
Content
Symbols used in this manual............................................4
Specific safety .........................................................4
General safety .........................................................5
Product label..........................................................6
Intended use ..........................................................8
Intended operator profile ..........................................8
Intended user profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating environment............................................8
Assembly and installation ..............................................9
Versions .............................................................10
Operating instructions ................................................11
Height adjustment....................................................12
Cleaning.............................................................13
Disinfection .....................................................13
Maintenance.........................................................14
Service inspection ...............................................14
Trouble-shooting .....................................................16
Technical data........................................................17
Dimensions (mm) ....................................................18
Dimensions (inches) ..................................................19
Disposal and recycling ................................................20
Original instructions

4
en
Symbols used in this manual
The following symbols are used in this manual as well as the associated
documentation supplied with the product.
!WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
!CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. It may also be used to alert against
unsafe practices.
IMPORTANT
IMPORTANT indicates important information about handling and use of
the product.
NOTICE
NOTICE is used to address practices not related to personal safety.
Hand injury
warning
Electricity or potentially
dangerous voltage.
Head injury warning.
Specific safety
!CAUTION
• Never leave a person lying on the bench without supervision.
• Always be careful when moving a person to and from the bench.

5
en
!CAUTION
• Please comply with these instructions to avoid the product becoming
damaged or destroyed.
• Do not perform repairs, disassembly, or assembly operations,
extensions, re-adjustments or modifications to this product. These
must be carried out by Pressalit or by persons authorized by Pressalit
only.
• Never allow children to operate this product unless under supervision.
The product is not intended for play.
• Never use the product if it is defective or damaged. Do not use a
defective product before it has been repaired.
General safety
!WARNING
• Read and understand the manual completely before use. Keep the
manual close to the unit.
• Comply with this manual to avoid accidents involving serious personal
injury.
• Never use or handle this product in other ways than are specified in
this manual, as this can put your safety at risk and cause damage to the
product.
• Make sure that everyone who is to install or use the product and its
systems has the necessary information and access to this manual.
NOTICE
• The information in this manual is based on correct fitting of the
product in accordance with our Assembly instruction.
• Pressalit cannot be held liable if the product is used in any way which
differs from that described in the guide.
• We reserve the right to amend this manual without prior notice.

6
en
Pressalit
A/S • Pressalitvej 1 • DK - 8680 Ry •
T
: [phone]
E-mail: [email protected] •
W
eb: ww
w
.pressalit.com
!
DD-MM-YYY
RZZZZYYYXXX(X)
XXX V
XX-XX Hz
XXX kg
XXX lbs
XXX kg
XXX lbs
XXX kg
XXX lbs
IPXX
XX W
2
min
18
min
①
②
③
④
⑭
⑮
⑯
⑰
⑨ ⑩ ⑪ ⑫ ⑬
⑤ ⑥ ⑦ ⑧
①Production date
②Article number
③Maximum user weight
④Safe working load
⑤Frequency
⑥Mains voltage
Product label

7
en
⑦Maximum power consumption
⑧IP class
⑨Duty cycle The motor on height-adjustable products can be used
for a maximum of 2 minutes of continuous operation, followed by
18 minutes pause.
⑩Name and address of manufacturer
⑪Type B applied part Part of the product in normal use necessarily
comes into physical contact with the patient to perform its function
The product complies with requirements of IEC 60601-1 to provide
protection against electric shock.
⑫Consult the manual for use for important cautionary information
such as warnings and precautions.
⑬Consult manual for use
⑭Product weight
⑮Do not dispose as unsorted municipal waste. The product should
be collected separately and returned to the designated recycling
service.
⑯This product does not contain any of the hazardous substances
mentioned in the Council Directive 2011/65/EC on RoHS.
⑰This product is CE-marked in accordance with the European
Medical Device Directive 93/42/EEC, including amendments
incorporated in Directive 2007/47/EEC. It also complies with all
relevant requirements in the Council Directive 2006/42/EC (of 17
May 2006) on machinery and with Council Directive 2011/65/EC (of
8 June 2011) on RoHS. A declaration of conformity can be found at
www.pressalitcare.com.

8
en
Product label placement ①.
NOTICE
If the product is installed in an atmosphere heavy in salt or chloride, the
warranty will be reduced from the normal 3 years to 1 year.
Salt and chloride have a corrosive effect on the products components and
will cause a decrease in the life expectancy of the product. The damaging
effects can, however, be reduced if the product is showered with tap water
on a daily basis.
Intended use
This product is intended for bathing a person who is unable to stand up or sit
down. The person is lying horizontally on the bench.
Intended operator profile
The product is to be used by personnel trained in health care and trained in
washing a person in their care.
Intended user profile
The product can be used by all - adults, children, young, old, whose weight
does not exceed the maximum load of 150 kg / 330 lbs.
Operating environment
For indoor use in a wet environment, such as a bathroom or wash room.
The product is intended to be used at room temperature, in a stand-alone
environment, in private homes, nursing homes and hospitals under normal
working conditions.
1

9
en
Assembly and installation
For assembly and installation, please refer to the assembly instruction
supplied with the product.
1
2
Pressalit Care
Pressalitvej 1
DK 8680 Ry
Denmark
[phone]
[phone]
[email protected]
www.pressalitcare.com
Telephone:
Telefax:
E-mail:
Web:
pressalit
care
®
Pressalit Care
Ret til ændringer forbeholdes Recht auf Änderungen sind vorbehalten Subject to alteration without further notice
Nous nous réservons le droit d’apporter toutes modifications pour l’amélioration de nous produits sans préavis. Wijzigingen voorbehouden Salvo variaciones Salvo variazioni Rätten till ändringar förbehålles Vi forbeholder oss rett til endringer Kaikki oikeudet muutoksiin pidätetään Rettur til breytinga áskilinn. Reservado o direito de fazer modificações sem prévio Åðéöí ëáóóüì åèá ãéá åêôí ðùôéêÜ ãÜèç, ì éêÝò ôå÷í éêÝò áëëáãÝòêáéðáñåêêëßóåéò ì ï í ôÝëùí
07/10 Mounting Info · Page 1/8
R8402
R8403
R8400
R8401
Pressalit Care
Telephone:
[phone]
Pressalitvej 1
Telefax:
[phone]
8680 Ry
E-mail:
press[email protected]
Denmark
Web:
www.pressalitcare.com
R8410 · R8420
R8421
T145121211 ·
T35 RB178520
·T8525445
T2512 ·
T132511
æalsdkslkdldls
ølædkasl,cdæl
kdæaldkkkdsl
ækda
04/11 Mounting · info Page 1/3
R
et til ændringer forbeholds · Recht auf Änderungen sind vorbehalten · Subject to alteration without further notice
N
ous nous réservons le droit d’apporter toutes modifications pour l’amélioration de nous produits sans préavis
W
ijzigingen voorbehouden · Salvo variaciones · Salvo Variazioni · Rätten till ändringar förbehålles · Vi forbeholder oss rett til endringer
K
aikki oikeudet muutoksiin pidätetään · Rettur til breytinga áskilinn · Reservado o direito de fazer modificações sem prévio
Ε
πιφνλασσόμεθα για εκτνπωτικά γάθη, μικές τεχνικές αλλαγές και παρεκκλίσεις μοντέλων
R8410

10
en
Versions
The nursing bench comes in four versions.
R8400 and R8402
R8401 and R8403

11
en
Operating instructions
1
2
22
To pull the (optional) safety rail
up: Swing the rail upwards from
under the bench. The safety rail will
automatically lock into position.
Support the bench using your hand or
body when folding it down, to avoid the
risk of damage.
The built-in gas cylinders make it easy to
fold the bench up against the wall after
use.
Take care to avoid injury to
hands when in the vicinity of
closing mechanical parts ①.
To fold the safety rail away: Release the two locks ②simultaneously and
swing the safety rail down under the bench.
2
2

12
en
Height adjustment
When the bench is installed at the recommended
height , it can be adjusted between 480 and 880 mm
( 18.9" and 34.6") above the floor.
The height adjustment is controlled by the wired
remote control unit.
Press and hold the Up button to raise the bench, and
press and hold the Down button to lower the bench.
Make sure that there is no
objects under the nursing bench
when operating the height
adjustment system.

13
en
Cleaning
Clean the nursing bench after each use. Use ordinary soapy water. Rinse off
with fresh water and dry with a soft cloth.
IMPORTANT
• Do not use an autoclave or other type of steam cleaner.
• Avoid aggressive cleaning agents containing acids or chloride.
• Never spray the nursing bench directly with a high pressure cleaner.
• Avoid use of aggressive, abrasive, corrosive or chloride-based cleaning
or disinfecting products.
Disinfection
When using the nursing bench for multiple patients, it is necessary to both
clean and disinfect the nursing bench between uses on different patients to
prevent the risk of cross infection.
A list of suitable cleaning agents and disinfectants can be found at www.
pressalitcare.com
!CAUTION
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent.

14
en
Maintenance
Expected service life of the nursing bench is 10 years, provided that
maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the bench to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated.
It is recommended that service inspection is done once a year.
Disconnect mains before
removing the covers.
Service inspection
• Check the hinges ①on the bench and the safety rail ②. Tighten if
necessary.
• Check the PVC canvas ③for damage and replace if necessary.
1
13
2
2

15
en
44
4
4
• Remove the upper and
lower retaining screws ④
on the cover and remove it
carefully.
• Check the wall brackets ⑤
and tighten if necessary.
• Oil moving parts with
WD40, especially the
sliding brackets ⑥.
• Check all electrical
connections to the control
box ⑦.
• Put the unit cover back
again and tighten the
retaining screws.
• Reconnect mains.
5
5
5
5
7
6
6

16
en
Trouble-shooting
Symptom Cause Action
The nursing bench
does not stay in
upright position.
The gas cylinders is
defective.
Contact Pressalit A/S or
your local dealer.
The product will not
work, even though
the remote control is
used correctly.
Fault in power supply. Check that all wires and
plugs are intact and
correctly connected.
Contact Pressalit A/S or
your local dealer.
The nursing bench
runs up and down
unevenly.
The sliding brackets
are not properly
lubricated.
Oil the sliding brackets
as described under
“Maintenance”.
Contact Pressalit Care or your dealer if the problem cannot be remedied.
Do not attempt to repair the product yourself, as this will invalidate the
guarantee.

17
en
Technical data
Max load 150 kg /330 lbs
Materials Powder laquered stainless steel
Plastics:
PVC (canvas)
Polystyrene (cover)
Weight R8400: 41.56 kg, 91.62 lbs
R8401: 43.02 kg, 94.84 lbs
R8402: 44.46 kg, 98.01 lbs
R8403: 45.92 kg, 101.23 lbs
IP class The product has an ingress protection class rating
of IPX6. The product may not be immersed in water,
but is designed to withstand powerful jets (12.5 mm
nozzle) of water from any direction.
Power specifications
Max consumption 70 W
Voltage Mains connection: 230V/120V/100V
Frequency 50/60 Hz
Current 0,3 A

18
en
Dimensions (mm)
600
1400
735
115
750
600
1800
735
115
750
R8400 R8401
600
1400
735
115
750
600
1800
735
115
750
R8402 R8403

19
en
Dimensions (inches)
23.62
55.11
28.93
4.52
29.52
70.86
29.52
23.62
28.93
4.52
R8400 R8401
4.52
29.52
55.11
23.62
28.93
1800
4.52
29.52
70.86
23.62
28.93
R8402 R8403

20
en
Disposal and recycling
The unit contains reusable materials. There are no known hazards or risks
associated with disposal of the product. All components can be discarded
after having been cleaned and disinfected.
When disposing of the product, we recommend that it be disassembled and
broken down into different waste groups for recycling or combustion.
The following table provides information on the recycling and handling of the
product.
Recyclable
components Material
Steel Steel can be recycled by being re-melted and included
as a secondary material in the production of new
steel.
Plastics Use plastic sorting and recycling systems where they
are locally available, otherwise incinerating plastic
has the added benefit of generating energy which can
be used for, for example, combined heat and power
production.
Electronics The electronic components should be collected
separately and returned to the designated recycling
service.