Pressalit Care R8273 User manual

Toilet lifter – Operation and maintenance manual en
Toiletløfter – Brugs- og vedligeholdelsesvejledning dk
Toalettupphäng – Bruks- och underhållsanvisning sv
Oppheng til toalett – Bruks- og vedlikeholdsveiledning no
R8273
R8283
R3886 - R3686
R3871- R3671
R1083 - R1081

English ...............................................................3
Dansk ...............................................................21
Svenska..............................................................38
Norsk................................................................55
en The guarantee covers faults or defects in material or manufacture
within a period of 5 years. Products are subject to minor technical
modifications and design deviations. E. & O.E.
dk Garantien dækker i 5 år fra fakturadato for materiale- og fabrika-
tionsfejl. Der tages forbehold for trykfejl, tekniske ændringer og
modelafvigelser.
sv Garantin gäller i 5 år från fakturadatum för material- och fabrikati-
onsfel. Med reservation för tryckfel, tekniska ändringar och modell-
avvikelser.
no Garantien gjelder i 5 år fra fakturadato for material- og fabrikasjons-
feil. Med forbehold for trykkfeil, tekniske endringer og modell-
forskjeller.

3
en
Content
Symbols used in this manual............................................4
General safety .........................................................5
Product label..........................................................6
Intended use ..........................................................8
Intended operator profile ..........................................8
Operating environment............................................8
Assembly and installation ..............................................9
Versions .............................................................10
Compatible support arms.........................................10
Operating instructions ................................................11
Support arms ........................................................12
Cleaning.............................................................13
Maintenance.........................................................14
Maintenance inspection ..........................................14
Dimensions - mm ....................................................17
Support arms....................................................17
Dimensions - inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Support arms....................................................18
Technical data........................................................19
Trouble-shooting .....................................................20
Disposal and recycling ................................................21
Original instructions
Mounting instruction
A mounting instruction is included with the product. It can also
be downloaded from www.pressalitcare.com.

4
en
Symbols used in this manual
The following symbols are used in this manual as well as the associated
documentation supplied with the product.
!WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
!CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury. It may also be used to alert against
unsafe practices.
IMPORTANT
IMPORTANT indicates important information about handling and use of
the product.
NOTICE
NOTICE is used to address practices not related to personal safety.
Hand injury warning
Feet injury warning
Head injury warning
Electricity or potentially dangerous voltage.

5
en
!CAUTION
• Please comply with these instructions to avoid the product becoming
damaged or destroyed.
• Do not perform repairs, disassembly, or assembly operations,
extensions, re-adjustments or modifications to this product. These
must be carried out by Pressalit or by persons authorized by Pressalit
only.
• Never allow children to operate this product unless under supervision.
The product is not intended for play.
• Never use the product if it is defective or damaged. Do not use a
defective product before it has been repaired.
!WARNING
• Read and understand the manual completely before use. Keep the
manual close to the unit.
• Comply with this manual to avoid accidents involving serious personal
injury.
• Never use or handle this product in other ways than are specified in
this manual, as this can put your safety at risk and cause damage to the
product.
• Make sure that everyone who is to install or use the product and its
systems has the necessary information and access to this manual.
NOTICE
• The information in this manual is based on correct fitting of the
product in accordance with our Assembly instruction.
• Pressalit cannot be held liable if the product is used in any way which
differs from that described in the guide.
• We reserve the right to amend this manual without prior notice.
General safety

6
en
Pressalit A/S • Pressalitvej 1 • DK - 8680 Ry •T: [phone]
E-mail: [email protected] • Web: www.pressalit.com
2
min
18
min
!
DD-MM-YYYY
RZZZZYYYXXX(X)
XXX V
XX-XX Hz
XXX kg
XXX lbs XXX kg XXX lbs XXX kg XXX lbs
IPXX
XXW
①
②
③
④
⑭
⑮
⑯
⑰
⑨ ⑩ ⑪ ⑫ ⑬
⑤ ⑥ ⑦ ⑧
①Production date
②Article number
③Maximum user weight
④Safe working load
⑤Frequency
⑥Mains voltage
Product label

7
en
⑦Maximum power consumption
⑧IP class
⑨Duty cycle The motor on height-adjustable products can be used
for a maximum of 2 minutes of continuous operation, followed by
18 minutes pause.
⑩Name and address of manufacturer
⑪Type B applied part Part of the product in normal use necessarily
comes into physical contact with the patient to perform its function
The product complies with requirements of IEC 60601-1 to provide
protection against electric shock.
⑫Consult the manual for use for important cautionary information
such as warnings and precautions.
⑬Consult manual for use
⑭Product weight
⑮Do not dispose as unsorted municipal waste. The product should
be collected separately and returned to the designated recycling
service.
⑯This product does not contain any of the hazardous substances
mentioned in the Council Directive 2011/65/EC on RoHS.
⑰This product is CE-marked in accordance with the European
Medical Device Directive 93/42/EEC, including amendments
incorporated in Directive 2007/47/EEC. It also complies with all
relevant requirements in the Council Directive 2006/42/EC (of 17
May 2006) on machinery and with Council Directive 2011/65/EC (of
8 June 2011) on RoHS. A declaration of conformity can be found at
www.pressalitcare.com.

8
en
Intended use
This product is intended for optimum ergonomics at a toilet, for both seated
and standing users with disabilities.
Intended operator profile
The product can be used by all - adults, children, young and old.
Operating environment
For indoor use in a wet environment, such as a bathroom or wash room. The
product is intended to be used at room temperature in private homes, nursing
homes and hospitals under normal working conditions.
!CAUTION
Never place objects underneath the toilet.
Product label placement ①.
1

9
en
Versions
R8273, R8283
Compatible support arms
R3886, R3686 R3871, R3671
R1081, R1083

10
en
Operating instructions
The toilet lifter can be adjusted 200 mm up
and down. Max load toilet lifter: 200 kg / 440
lbs. Max load support arms: 150 kg / 330 lbs.
The height adjustment is controlled by
operating buttons attached to the right
support arm.
Press and hold the Up button to raise
the toilet, and press and hold the
Down button to lower it. When the
button is released, the motion stops.
Take care to avoid injury to hands,
feets and head when in the vicinity
of moving mechanical parts.
!CAUTION
Never place objects underneath the toilet.

11
en
Take care to avoid
injury to hands when
in the vicinity of
closing moveable parts.
Support arms
The support arms can be folded up and
down. Fold them up when not in use.
For support arms R3686, R3786,
R3671 and R3771: You can hear a
click when the support arm is correctly
folded up.
The support arms can be adjusted 150
mm in height.
Fold up the arm.
Press and turn the height adjustment
locking handle ①.
Move the wing ② with the support arm
up or down.
Tighten the locking handle again. It will
slide back into place by itself.
1
2

12
en
Cleaning
Clean the product after each use. Use ordinary soapy water. Rinse off with
fresh water and dry with a soft cloth.
For surface disinfection, chlorine-based disinfectants may be used according
to the product specification and safety precautions for these products.
IMPORTANT
• Do not use an autoclave or other type of steam cleaner.
• Avoid aggressive cleaning agents containing acids or chloride.
• Never spray the product directly with a high pressure cleaner.
• Avoid use of aggressive, abrasive, corrosive or chlorine-based cleaning
or disinfecting products.
!CAUTION
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent.

13
en
Maintenance
Expected service life of the toilet lifter is 10 years, provided that maintenance
is carried out as described below.
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the product to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated.
It is recommended that maintenance inspection is done once a year.
Maintenance inspection
Take the toilet to its highest
position.
Disconnect mains
before removing
the covers.
Remove the control panel ①.
Remove the toilet ②.
2
1

14
en
Unscrew the locking handles
for the support arms ③.
Unscrew the screws for the
support arms ④and remove
both the support arms.
3
3
4
4
5
Uncrew the screw ⑤ for the
lower front cover and remove it.
Reach up under the front cover
to unplug the wire ⑥ from the
control buttons to the control
box inside the cabinet.
The plug ⑦ can pass through
the hole in the cabinet side.
7
6

15
en
Check all electrical connections ⑦.
Lubricate the inner square tubes ⑧with
WD-40 or equivalent.
Reattach the front and lower front cover.
Mount the support arms and the toilet.
Reconnect mains.
Take the toilet to its lowest position, and
then run it to the top position again to
distribute the lubricant.
Remove the front cover.
7
8
8

16
en
Dimensions - mm
511
Max.
1544
min.
1344
207
R8273, R8283
Support arms
965
168
430
115
815
168
430
115
R3886, R3686 R3871, R3671
965
155
100
40
20
430
R1083, R1081

17
en
Dimensions - inch
8⁄
Max.
60⁄
min.
52⁄
20⁄
R8273, R8283
Support arms
6⁄
4⁄
16⁄
38
6⁄
4⁄
16⁄
32⁄
R3886, R3686 R3871, R3671
⁄
6⁄
38
1⁄
3⁄
16⁄
R1083, R1081

18
en
Technical data
Max load Toilet lifter: 200 kg / 440 lbs
Support arms: 150 kg / 330 lbs
Materials Stainless steel
Plastics
Weight
R8273, R8283 55,9 kg / 123.2 lbs
R3886 5,34 kg / 11.7 lbs
R3686 5,24 kg / 11.5 lbs
R3871 5 kg / 11 lbs
R3671 4,9 kg / 10.8 lbs
R1083 4,57 kg / 10 lbs
R1081 3,15 kg / 6.9 lbs

19
en
Trouble-shooting
Symptom Cause Action
Operating buttons
does not work.
Fault in power
supply.
Check that all wires and
plugs are intact and
correctly connected.
Contact Pressalit A/S or
your local dealer.
The product runs up
and down unevenly.
The inner square
tubes are not
properly lubricated.
Oil the inner square
tubes as described under
”Maintenance”.
Height adjustment of
support arms is not
possible.
The screws ①
holding the support
arm in place are
tightened too hard.
Loosen the screws until
height adjustment is
possible. Check mounting
instruction.
Contact Pressalit Care or your dealer if the problem cannot be remedied.
Do not attempt to repair the product yourself, as this will invalidate the
guarantee.
1

20
en
Disposal and recycling
The unit contains reusable materials. There are no known hazards or risks
associated with disposal of the product. All components can be discarded
after having been cleaned and disinfected.
When disposing of the product, we recommend that it be disassembled and
broken down into different waste groups for recycling or combustion.
The following table provides information on the recycling and handling of the
product.
Recyclable
components Material
Steel Steel can be recycled by being melted down and included
as a secondary material in the production of new steel.
Plastics Use plastic sorting and recycling systems where they are
locally available, otherwise incinerating plastic has the
added benefit of generating energy which can be used for,
for example, combined heat and power production.
Electronics The electronic components should be collected
separately and returned to the designated recycling
service.