Pretika Hf11 Instruction Manual

Instructions

for Use

& Warranty

Information

Model HF111

Soften and Smooth Skin

Hand & Foot

Micro-Power Buffer

Congratulations and thank you for being a customer of Pretika!

Before you start, please take a moment to get to know your Hand

and Foot Micro-Smoothing Buffer and how it works. For important

information about safety and how to use the device, read the full

Instructions for Use booklet. Contact the experts at Pretika for any

assistance in helping you get started.

Customer Service Contact:

1-949-481-8818

Email: [email protected]

Or visit our website at www.pretika.com

Hours of Operation:

Monday – Friday, 8:00 AM to 4:00 PM Pacic Standard Time

IMPORTANT INFORMATION

It is our experience that if a product uses batteries, many of the

problems thought to be product defects are simply caused by weak

batteries. To save any unnecessary inconvenience and expense,

we encourage you to try replacement batteries before you return

the product.

Soften and Smooth Skin

Hand & Foot

Micro-Power Buffer

2 Settings

Power Button

Replaceable

Pummice

Applicator

Battery

Compartment

To Install or Replace Batteries

1. Make sure the buffer is turned off.

2. Remove back cover by placing

thumb on battery cover and

slide off with downward push.

3. Carefully pull out batteries

(if replacing) and insert 2 new

“AA” batteries.

4. Use the markings in the battery

compartment as a guide to

position the (+) positive or (-)

negative

5. End of each battery

6. Replace back cover by sliding

up cover into closed position.

7. To avoid leakage, check the batteries regularly for deterioration.

8. Remove exhausted batteries and remove the batteries if the

Resurfacing Tool is not to be used for a long time.

Do not mix old and new batteries. Do not mix alkaline, standard

(carbonzinc) or rechargeable (nickel-cadmium) batteries. To dispose

of alkaline batteries, place in the trash (normal municipal waste).

Recycling of batteries at your local recycling center is good for the

environment.

Installing Pumice Stone Head:

Press the Pumice Stone Head (included) onto the connection

opening until it locks into position with a click. If replacing the

Pumice Stone Head, gently pull Pumice Stone Head to remove.

Daily Treatment

Step 1: Cleanse Skin

Before use, thoroughly cleanse and soak areas to be treated. Rinse

well and blot dry.

Step 2: Attach Pumice Stone Applicator. Press applicator to skin

and turn on selecting desired speed setting.

Step 3: Use a light circular motion. This step works to remove

rough, dry skin, and rene the skin’s surface. Work each area for

2-5 minutes, depending on your skin’s needs. Wash off residue

with warm water and blot dry.

Step 4: For Use in Combination with your Daily

Moisturizer Routine

Micro-Power Buffer can be used with many of your daily moisturiz-

ing routines. Simply apply your favorite moisturizing after exfoliat-

ing and bufng the skin. The Micro-Power Buffer can be used

daily, morning and night, but if you have especially sensitive skin

or other skin concerns, talk to your doctor or dermatologist about

frequency of use.

Caring For Your Resurfacing Tool

1. Wipe handle with slightly damp cloth. Do not immerse

Resurfacing Tool in water or any other liquid. Do not open the

battery compartment if the appliance is wet to avoid corrosion

to the inside parts.

2. Clean attachments after every use. Remove attachments from

Resurfacing Tool. Do not allow liquid cleansers or moisturizers

to accumulate on attachments or handle.

Replace Pumice Stone Buffer Heads as needed– they can be

purchased from your retailer or online at www.pretika.com.

Micro-Power Buffer Features

To Install or Replace Batteries

1. Make sure the buffer is turned off.

2. Remove back cover by placing

thumb on battery cover and

slide off with downward push.

3. Carefully pull out batteries

(if replacing) and insert 2 new

“AA” batteries.

4. Use the markings in the battery

compartment as a guide to

position the (+) positive or (-)

negative

5. End of each battery

6. Replace back cover by sliding

up cover into closed position.

7. To avoid leakage, check the batteries regularly for deterioration.

8. Remove exhausted batteries and remove the batteries if the

Resurfacing Tool is not to be used for a long time.

Do not mix old and new batteries. Do not mix alkaline, standard

(carbonzinc) or rechargeable (nickel-cadmium) batteries. To dispose

of alkaline batteries, place in the trash (normal municipal waste).

Recycling of batteries at your local recycling center is good for the

environment.

Installing Pumice Stone Head:

Press the Pumice Stone Head (included) onto the connection

opening until it locks into position with a click. If replacing the

Pumice Stone Head, gently pull Pumice Stone Head to remove.

Daily Treatment

Step 1: Cleanse Skin

Before use, thoroughly cleanse and soak areas to be treated. Rinse

well and blot dry.

Step 2: Attach Pumice Stone Applicator. Press applicator to skin

and turn on selecting desired speed setting.

Step 3: Use a light circular motion. This step works to remove

rough, dry skin, and rene the skin’s surface. Work each area for

2-5 minutes, depending on your skin’s needs. Wash off residue

with warm water and blot dry.

Step 4: For Use in Combination with your Daily

Moisturizer Routine

Micro-Power Buffer can be used with many of your daily moisturiz-

ing routines. Simply apply your favorite moisturizing after exfoliat-

ing and bufng the skin. The Micro-Power Buffer can be used

daily, morning and night, but if you have especially sensitive skin

or other skin concerns, talk to your doctor or dermatologist about

frequency of use.

Caring For Your Resurfacing Tool

1. Wipe handle with slightly damp cloth. Do not immerse

Resurfacing Tool in water or any other liquid. Do not open the

battery compartment if the appliance is wet to avoid corrosion

to the inside parts.

2. Clean attachments after every use. Remove attachments from

Resurfacing Tool. Do not allow liquid cleansers or moisturizers

to accumulate on attachments or handle.

Replace Pumice Stone Buffer Heads as needed– they can be

purchased from your retailer or online at www.pretika.com.

To Install or Replace Batteries

1. Make sure the buffer is turned off.

2. Remove back cover by placing

thumb on battery cover and

slide off with downward push.

3. Carefully pull out batteries

(if replacing) and insert 2 new

“AA” batteries.

4. Use the markings in the battery

compartment as a guide to

position the (+) positive or (-)

negative

5. End of each battery

6. Replace back cover by sliding

up cover into closed position.

7. To avoid leakage, check the batteries regularly for deterioration.

8. Remove exhausted batteries and remove the batteries if the

Resurfacing Tool is not to be used for a long time.

Do not mix old and new batteries. Do not mix alkaline, standard

(carbonzinc) or rechargeable (nickel-cadmium) batteries. To dispose

of alkaline batteries, place in the trash (normal municipal waste).

Recycling of batteries at your local recycling center is good for the

environment.

Installing Pumice Stone Head:

Press the Pumice Stone Head (included) onto the connection

opening until it locks into position with a click. If replacing the

Pumice Stone Head, gently pull Pumice Stone Head to remove.

Daily Treatment

Step 1: Cleanse Skin

Before use, thoroughly cleanse and soak areas to be treated. Rinse

well and blot dry.

Step 2: Attach Pumice Stone Applicator. Press applicator to skin

and turn on selecting desired speed setting.

Step 3: Use a light circular motion. This step works to remove

rough, dry skin, and rene the skin’s surface. Work each area for

2-5 minutes, depending on your skin’s needs. Wash off residue

with warm water and blot dry.

Step 4: For Use in Combination with your Daily

Moisturizer Routine

Micro-Power Buffer can be used with many of your daily moisturiz-

ing routines. Simply apply your favorite moisturizing after exfoliat-

ing and bufng the skin. The Micro-Power Buffer can be used

daily, morning and night, but if you have especially sensitive skin

or other skin concerns, talk to your doctor or dermatologist about

frequency of use.

Caring For Your Resurfacing Tool

1. Wipe handle with slightly damp cloth. Do not immerse

Resurfacing Tool in water or any other liquid. Do not open the

battery compartment if the appliance is wet to avoid corrosion

to the inside parts.

2. Clean attachments after every use. Remove attachments from

Resurfacing Tool. Do not allow liquid cleansers or moisturizers

to accumulate on attachments or handle.

Replace Pumice Stone Buffer Heads as needed– they can be

purchased from your retailer or online at www.pretika.com.

Warning

For external use only. KEEP OUT OF REACH OF CHILDREN.

Please be sure to use as directed. As with any product, discontinue

use if rash, redness or itching occurs. Consult physician if irritation

persists. Use this appliance only for its intended use as described

in the Instructions For Use booklet. Do not apply extreme pressure

when using unit or when replacing attachments. This could damage

product. The attachments are delicate and must be attached and

removed with care. Not following operating instructions carefully

may result in damage to the unit and attachments. Basic safety

precautions should always be followed when using any battery-

operated product, especially when children are present. AVOID

DIRECT CONTACT WITH EYES AND HAIRLINE/HAIR. IF SKIN

IRRITATION OR REDNESS OCCURS, DISCONTINUE USE.

Limited 90 Day Warranty

Your Pretika product is warranted to be free from defect in material

and workmanship for a period of 90 days after its original purchase

date under normal use. This warranty extends only to the original

retailer purchaser with original proof of purchase and only when

purchased from an authorized Pretika retailer or reseller. This warranty

does not cover products determined by Pretika Corporation to be

damaged by any of the following:

• Accident, misuse, abuse or alteration

• Servicing by unauthorized persons

• Use with unauthorized accessories or use other than instructed

• Use of incorrect charging adaptor types

• Any other conditions beyond our control

Some states do not allow the exclusion or limitation of incidental or

consequential damages or allow limitations on how long an implied

warranty lasts, so the above limitations or exclusions may not apply

to you.

This warranty gives you specic legal its negligence. Pretika’s entire

liability for any defective product shall not exceed the purchase price

for the defective product. Pretika disclaims any liability for general,

consequential, incidental or special damages, even if aware of the

likelihood of such damages.

During Warranty Period with Proof of Purchase (store receipt)

Should your product become defective during the warranty period,

package the item securely and return it prepaid/insured– along with

proof of purchase to the address shown below:

Outside Warranty Period

Should your product become defective outside the warranty period–

or you do not have store receipt, package the item securely and

return it prepaid/insured along with a check or money order payable

to Pretika Corporation in the amount of $20.00 to cover handling and

postage charges. Be sure to include legible name, street address,

email and phone number information and send to the address below:

Return to:

Pretika Corporation

Warranty Repair Department

12215 Holly Street

Riverside, CA 92509 USA

To insure prompt repair or replacement, provide complete, legible

name, street address, email and phone number information and a

note indicating the nature of the product defect. We will Repair or

Replace (at our sole discretion) product at no charge and return via

ground shipment.

Save these instructions for future reference.