Pro-Form 990 S User manual

PR0.FORM" 9 D
STATIONARY BIKE
[-SE/AR8
Model No. 831.288300
Serial No.
Writetheserialnumberin the space
aboveforfuturereference.
. Sedal
Number
Decal
E_X _- R C I S _-
W'<:_ LJ I F=_ M _" NT
HELPLINE!
1-800-736-6879
"P.AI ITIf'lhl_
Reacl all pr_caut]ons and Ir_stru_
tions In this manual before Using i
th!spqulpment. Keep this manual
for,future reference.
USER'S MANUAL
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

PRO.FORM" 99D
ST,_T I O N A R Y B I K E
TABLE OF CONTENTS
FULL 90 DAY WARRANTY ............................. ................................. .2
IMPORTANT PRECAUTIONS ............... -............................................. .3
BEFORE YOU BEGIN ....................... ........................................... .4
ASSEMBLY ........................................................................... 5
HOW TO USE THE PROFORI_ 990S ........................................ •.............. 7
CONDITIONING GUIDELINES .....
MAINTENANCE ANB-STORAGE ...
NOTES ......................
PART LIST .....................
EXPLODED DRAWING ..........
ORDERING REPLACEMENT PAI_I'S ii....:......................."..................:....:.1o
............. ......................... .....1..........14
eeeoeoeoeoa..ee*.ee.ee.,,.eeeee*,.eeeoeQo.ee.e,e*ea'''*15
:.......... ; ................................... Back Cover
Ii
FULL 90 DAY WARRANTY I
For 90 days from the date of purchese, If failure occurs due t_..defect in material or workmanship in this
SEARS BIKE EXERCISER, contact the nearest SEARS Sen/ice Center throughout the United States
._JldS_S will repair or replace the BIKE EXE.RCISEB, t[c_.of charge.
This warianty does not apply when the BIKE EXERCISER is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other fightswhich vary from state
to state.
•--SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179
r
.2

IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious Injury, read the
using the PROFORM" 990S. following Important precautions before
1. Read ell Instructions In this manual before
using the gg0S.
2. It is the responsibility of the owner to
ensure that all users of the 990S ere
adequately Informed of all precautions.
,
o
Wear appropriate clothing when exercising;
do not wear loose clothing that could
become caught on the 990S. •
Always wear athletic shoes when using the
990S.
3. Use the 990S Indoors, on a level surface.
Keep the 990S away from moisture and
dusL Place a mat under the 990S to protect
the floor or carpet.
_4. Inspect and tighten all parts regularly.
Replace any worn parts Immediately.
5. Keep children and pets away from the 990S
at all times.
6. The 990S should not be used by persons
weighing more than 250 pounds.
.H
9. Always keep your back straight when using
the 990S. Do not arch your back.
10. If you feel paln or dizziness at any time
while exercising, stop immediately and
begin cooling down.
11. Use the 990S only as described in this
manual.
12. The 990S is Intended for in-home use only.
Do not use the 990S in s commercial, rental,
or Institutional settlng.
WARNING: Before beginning this or any exercise program, consult your physician. This Is espe-
cially Important for persons over the age of 35 or persons with pre-existing health problems. Read
all Instructions before using. SEARS assumes no responsibility for personal Injury or property "
damage sustained by or through the use of this product.
The decal shown at the right
has-besrLplaced on the 990S, If
the decal is missing, or if it Is
not legible, please call our
Customer Service Department
toll-free st 1-800-999-3756 to
order a frse,replacement decal.
Apply the decal In the location
shown.
ACAUTION:.
3

BEFORE YOU BEGIN
Thank you for selecting the innovative PROFORM*
990S. The 990S offers a unique form of low-Impact
exercise that works both the upper body and the
lower bodyfor greater cardiovascular benefits and
increased muscle toning. The 990S features
adjustable i'esistanca to let you tailor your exercise
to the level that's perfect for you. And when you're
not exercising, the 990S can be folded for compact
storage.
For your beneflt_ read this manual carefully before
you use the PROFORM® 990S. If you have addition-
al questions, please call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m.
until7 p.m. Central "13me(excluding holidays). To help
us assist you, please note the product model number
and sedal number before calling. The model number
Is 831.288300. The sedal number can be found on a
decal attached to the 990S (see the front cover of this
manual for the locationof the decal).
Before reading further,please lookat the drawing
below and familiarize yourself with the parts that are
labeled.
Seat
Handlebar
pedaling Resistance Dial
Console
Strap
Pedal
Lock Knob-
RIGHT SIDE
FRONT
4

_ASSEMBLY
Place all parts of the PROFORI_P 990S In a cleared area and remove the packing materials. Do not dispose.of
the packing matedals until assembly Is completed.
Assembly requires the Included tools and your own adjustable wrench _•
1. Refer to the Inset dmwlng. Loosen the Lock Knob (36)
on the dght side of the Frame (1).
Slide the Seat Frame (2) out until it stops. Retighten
the Lock Knob (36).
2. Attach the Seat Bracket (58) to the Seat Frame (2)
with the two Seat Bracket Botts (59) and 3/8" Nyton
Locknuts (37).
3. Set the two Seat Spacers (46) on the Seat Frame (2).
Attach the Seat (53) and the Seat Spacers to the Seat
Frame with the.four Seat Screws (53).
36
2
3
2
5

4. Identify the Left Pedal (48) (there is an "L" on the
Left Pedal for identification). Using an adjustable
wrench, tighten the Left Pedal counterclockwise into
the leftarm of the Crank (14). Tighten the Right
Pedal (not shown) c/ockwise intothe dght arm ofthe
Crank.
Adjustthe Pedal Strap (30) on the Left Pedal (48) to,
the desired position. Press the Pedal Strap onto the
adjustment _b on the Left Pedal. Adjust the Pedal
Strap on the Right Pedal (not shown) In the same
manner.
5. Remove the four stickers frem the brackets on the
left and dght sides of the Seat Frame (2).
Hold the Left Handlebar (6) inside the left bracket.
Insed the Long Carriage Bolt (13) through the
bracket and the Left Handlebar. Hold the Right
Handlebar (5) inside the dghtbracket. Insert the
Long Carriage Bolt through th_ bracket and the
Right Handlebar. Make sure that the Handlebars
are on the correct sides--the ends should bend
outward slightly, Slide the Star Washer (11) onto
the Long Carriage Bolt and tighten the Resistance
Knob (7) onto the Long Carriage Bolt_Make sure
that the head of the Long Carrlege Bolt Is resting
In the square hole in the left brackeL
Note: To attach the Res'_anoe Knob (7) on the left
• side, reverse the p_sitions Of_e Long Carriage Bolt
(13), Star Washer (11), and Resistance Knob.
6. Ifthere Is a rubber b'Zndaround the Console (29),
remove it.
The Console (29) requires two "AA"batteries (not
induded)--alkaline battedes are recommended.•
Open the battery cover on the beck of the Console.
Press two baftedes intothe battery dip. Make sure
that the negative (-) ends of the batteries are
touching the springs. Pla-_FtffiTbattery clip in the
Console and close the battery cover.
4
5
v 61__cket
6
Battery 29
Bafte_
Make sure that all parts are properly tlgh-_ned before.you use the PROFORM • 990S.
6

HOW TO USE THE PROFORM ®990S
HOW TO ADJUST THE PosmoN OF THE SEAT
FRAME
The Seat Frame (2) can be adjusted to the position
that is the most comfortablefor you. To adjust the
Seat Frame, first loosen the Lock Knob (36) on the
dght side of the frame. Slide the Seat Frame forward
or baokward to the desired position. Rettghten the
Lock Knob.
HOW TO ADJUST THE PEDAL STRAPS
To adjust each Pedal Strap (31),'_lrst pull the end of
the Pedal Strap off the adjustment tab on the Pedal
(47). Align a d'dferenthole In the Pedal Strap with the
adjustment tab. Press the Pedal Strap onto the
adjjustmenttab.
HOW TO ADJUST THE PEDALING RESISTANCE.
The pedaling
resistance can
be adjusted
with the 67
Resistance Dial
(67) located in
front of the
console. To
increase the
resistance, tam
the Resistance
Dial clockwise;to decrease the resistance, tum the
Resistance Dial counterclockwise.
HOW TO USE THE HANDLEBARS
For lower-body exercise only, hold the Handlebars
(5, 6) in astationan] position as you pedal."
For a full-body workout, move the Handlebars (5, 6)
up and down as youpedal. Be sure to keep your beck
straightand your knees bent slightly.To vary the
intensity of your upper body exercise, the resistance
of the Handlebars can be adjusted. The resistance is
controlled with the Resistance Knob (7). To Increase
the resistance, turn the Resistance Knob clockwise; to
decrease the resistance, tum the Rasistance Knob
counterclockwise.
7

DIAGRAM OF THE CONSOLE program. Note: Ifyou stop exercising, the time
mode willpause after afew seconds.
JDIGITAL PACER ELECTRONICS J
ACTUAL SCAN'CALS" FAT_
i
PROGRAM SPEED • TIME • DISTANCE
AUTO OFF
ON/RESET MODE PROGRAM
20 18 16 14 12 10 8 6 4 2tabu.
30 lilll ill Ill Ilil gel Hill Illl lllll'ile Illll
IlNlll mmim
mmmmmm
mimmimmmm I
mmmm=mi=lmm
| Nlllmmllll
_lnterval
[Aer.obic
80 HBIHHHII i
illillllll II II1 i
lillllili i
IHiglilll i
Billlililim
5"iBM i_iimil
[]Fat Burn
DESCRIPTION OF THE CONSOLE
The innovative console offers a manual mode and
three pacer programs. The pacer programs are
designed to help you achieve specific exercise goals
by pacing your exercise. The programs include a
stamina-building Interval program, an Aerobic
program, and a special Fat Bum program. Whether
you select the manual mode or one of the three pacer
programs, the console's six monitor modes will
providecontinuous exercise feedback dudng your
workouts.
DESCRIPTION OF THE MONITOR MODES
• Speed--This mode shows your_-edaling pace, In
miles per hour.
• Time--If you select the manual mode, this mode
will count up the length of time you have exercised.
If you select one of the three pacer programs, this
mode willcount down the time remaining in the
•Distance--This mode shows the total distance you
have pedaled, up to gg.gg miles. The display will
then reset to zero and continue counting.
., Fat calodes (FATCALS)---This mode shows the
approximate number of fat calodes you have
burned. (See FATBURNING on page 10 for an
explanation of fat calofles.)
•Calodes (CALS)--This mode shows the approxi-
mate number of nalodes you have burned. (This
number includesbeth fat calodes and carbohydrate
calories. See FATBURNING on page 10.)
•Scan--This mode displays the calories, fat calories,
speed, time, and distance modes, for 5 seconds
each, in a repeating cycle.
HOW THE PACER PROGRAMS OPERATE
When you use a
pacer program,
two columns of
bars willappear in
the display.The
leftcolumn will
show atarget
pace; the right
column will show
your actual
pedaling pace. The
ACTUAL SCAN" ¢
I--" -)F
PR0 MPEED.,
Target Pace Actual Pace
target pace will change periodically dudng the
program;as the target pace changes, simply adjust
your pedaling pace to keep both columns at the same
height.Important: The target pace is a goalpace.
Your actual pace may be slower than the target
pace, especially during the first few months of
your exercise program. Be sure to exercise at a
pace that Is comfortable for you.
The graphs at the bottomof the console show how the
target pace willchange duringthe programs. Look at
the graphs for a moment (see the drawing at the left).
Each graph is dividedinto ten columns, with six bars in
each column. The columns represent two-minute time
pedods, and the red bars show what the target pace
will be. In the first column ofthe Interval graph; for
example,there is one red bar. This shows that dudng
the first two minutesofthe Interval program, the target
pace willbe about 5 milesper hour (see the scele at
the leftend of the graph). In the second column there
are five red bars.Thisshows that dudng the second
two-minute time period, the target pace will be about
25 miles per hour.Note: Because there are ten two-
minute periods,each programwill last for twenty
minutes.
8

STEP-BY-STEP CONSOLE OPERATION
Before the console can be operated, two "AA" bat-
teries must be Installed. (See assembly step 6 on
page 6 for Installation instructions.) Follow the steps
below to operate the console.
B Turn on the power
To tum onthe AUTO OFF
©©©
ON/RESET MODE PROGRAM
power, press
the on/reset
button or
simply begin
pedaling.
When the
power is tumed on, the entire display will appear
for two seconds. The console will then be ready
for use. Note: If battedes were just installed, the
power will already be on.
B Select one of the three pacer programs or the
manual mode.
To select one of
the pacer
programs,
repeatedly
press the
program button.
The program
indicator will
show which
program you
have selected.
To select the
Program Indicator
AaU_j =ou_.OU.S.r_TJ_S
"= rlt. "L]I
_2 sB I:
AuTo OFF
OOO
ON/RESET MODE PIIOGII_
manual mode, press the program button until the
program indicator dLsappears. The programs will
be selected In the following order:,program 1
(Interval), program 2 (Aerobic), program 3 (Fat
Bum), manual mode.
the program progresses, the target pace will
change periodically;,as the target pace changes,
adjustyour pedaling pace to keep both columns
at the same height. Important: The target pace
Is a goal pace. Your actual pace may be slower
than the target pace, especially dudng the first
few months of your exercise program. Be sure
to exercise at a pace that Is comfortable for
you.
B Follow your progress with the monitor modes
To select the
scan mode,
repeatedly
press the mode
buttonuntila
mode indicator
appears under
the word"scan."
A flashingmode
indicatorwill
show which
mode Is
correnUy displayed.
Mode Indicators
ACTU_ _- FAT CALS
-==-
Ill
pRO_3R*6*M SPEED * 1"1ME• DISTANCE
AUTO OFF
OO.O
ON/RESET MODE PIIOGIL,_
To select the speed, time, distance, fat celodes,
or calories mode for continuous display,
repeatedly press the mode button until the
desired mode indicator appears. (Make sure that
the scan mode is not selected.)
If desired, the display can be reset by pressing
the on/reset button.
_! Turn off the power
To tum off the power, simply wait for ebout
four minutes. If the pedals are not tumed and
the console buttons are not pressed"for four
minutes, the power will turn off automatically.
B Begin your workout
If you selected
the manual
mode, go to
step 4. If you
selected one of
the pacer
programs, two
columns of bars
will appear in
the display. The
left column will
ACTUAL SCAN* (
A
PROGRAM _P.EED "]
Target Pace Actual Pace
show one bar, showing that thetarget pace is
about 5 miles per hour. The dght column will
show your actual pace. Adjust your pedaling pace
until only one bar appears in the dght column. As
9

CONDITIONING GUIDELINES
The following general guidelines will help you to plan
your exercise program. Remember that proper nutri-
tion and adequate rest are essential for successful
results.
WARNING: Before beginning this or any exer-
cise program, consult.Your phystplan. Thi s is
especially Important for person S over the age
of 35 or persons with pre-existing health
problerns.il
EXERCISE INTENSITY
Whether your goal isto bum fat or strengthen your
cardi0_vascularsystem, the key to achieving the
- desired results is to exercise with the proper Intensity.
The proper intensity level can be found by using your
heart rate as a guide.The chart I_low shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
20 30 40 50 60 70
165 --Is___ss__
138 145 "_
125- 130
-- 1 o- 12513._oo
-- 115 _118 -- 115
---- 11_3°los
b.p.m. -- 9._.5_590
80 AGE
AEROBIC
MAX. FAT
FAT BURN
To findthe proper heart rate for you, first find your age
near the top of the chart (ages are rounded off to the
nearest ten years). Next, look below your age and
find the three numbers in boxes. The three numbers
are your "trainingzone." The lowest number is the
recommended heart rate for fat buming;.the middle
number is the recommended heart rate for maximum
fat buming; .the highest number is the recommended
heart rate for aerobic exercise.
Fat Burning
To bum fat effectively,you must exercise at a rela-
tively low intensity level for a sustained period of time.
Dudng the first few minutes of exercise, your body
.uses easily acca_,.sib-[ecarbohydrate calodes for
energy. Only after the first few minutes of exercise
does your body begin to use stored fatcalodes for
energy. If your goal isto bum fat, adjust the intensity
of your exercise untilyour heart rate is near the
lowest number in your training zone as you exercise.
For maximum fat burning, adjust the intensity of your
exercise untilyour heart rate is near the middle
number in your training zone as you exercise.
Aerobic Exercise
If your goal isto strengthen your cardiovascular
system, your exercise must be =aerobic."Aerobic
exercise isactivitythat requires large amounts of
oxygen for prolonged pedods of time. This Increases
the demand on the heart to pump blood to the
muscles, and on the lungs to oxygenate the blood.
For aerobic exercise, adjust the Intensity of your
exercise untilyour heart rate is near the highest
number in your training zone.
HOW TO MEASURE YOUR HEART RATE
To measure your heart rate, first exercise for at least
four minutes. Then, stop exercising and place two
fingers on your
wdst as
shown. Take a
six-second
heartbeat
count, and
multiply the
result by 10 to
findyour heart
rate. For
example,
if your six-
second heart-
beat count is 14, your heart rate is 140 beats per
minute. (A s'_sscond count Is used because your
heart rate willdrop rapidlywhen you stop exercising.)
Adjust the Intens'dyof your exercise until your heart
rate is at the desired level. You can adjust the inten-
sit,/of your exercise by changing your pedalin_ pace,
adjusting the pedaling resistance, or mov',ngthe
handlebars as you pedal.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes ofgfs_trstretcJ__
ing and light exercise. A proper warm-up increases
your body temperature, heart rate, and circulation in
preparation for strenuous exercise. (See
SUGGESTED STRETCHES on page 11.)
10

Training zone exercise, consisting of 20 to 30
minutes of exercise with your heart rate in your
training zone.
A cool-down, with 5 to 10 minutes of stretching.
Thorough stretching helps to prevent problems caused
when you stop exercising suddenly. Stretching for
increased flexibility is also most effective after exercis-
ing. A proper cooFdown should leave you feeling
relaxed and comfortably tired.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts each week, with at |east one day of rest
between workouts. After a few months of regular
exercise, you may complete up to five workouts each
week, ifdesired.
Remember, the key to success is make exercise a
regular and enjoyable part of your everyday life.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown in the
drawings below. Move slowly as you stretch--never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowlybend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax_"F[epeat 3 times. Stretches: Hamstrings,
back of knees, and back.
2. Hamstring Stretch
Sit with one leg extended. Bdng the sole of the opposite foot
toward you and rest itagainst the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstdngs, lower back, and groin.
3. CalflAchllles Stretch
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot fiat on the floor. Bend your frontleg, lean for-
ward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for each leg. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons, and ankles.
4. Quaddceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quaddceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees out-
ward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quaddceps and hip muscles,
3
4
11

MAINTENANCE AND STORAGE
inspect and tighten all parts of the PROFORIvP 990S
regularly.The 990S can be cleaned with asoft, damp
cloth.To prevent damage to the console, keep liquids
away from the console and keep the
console out of directsunlight.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. To replace the batteries, refer to
assembly step 6 on page 6.
HANDLEBAR LUBRICATION
If a squeak is heard when the handlebars are moved,
a small amount of grease should be applied.
Turn the Resistance Knob (7) counterclockwise until
you can remove it. Remove the Star Washer (11).
Using pliers,gdp the head of the_ong Cardage Bolt
(13) and remove it.Apply a thin film of grease to both
sides of the Handlebar Housings (10). Reattach all
parts, making sure that they are in the positions
shown.
CRANK ADJUSTMENT
If the arms of the Crank (14) become loose, they
should be tightened in order to prevent excessive
wear. Loosen the Crank Nut (21) on the left arm of the
Crank. Place the end of a standard screwddver in one
of the slots in the Slotted Crank Nut (19). Ughtly tap
the sorewddver with a hammer to tum the Slotted
Crank Nut counterclockwise until the arms are no
longer loose. Do not overtighten the Slotted Crank
Nut. When the Slotted Crank Nut is propedy tight-
ened, tighten the Crank Nut.
HOW TO STORE THE PROFORM* 990S
When the PROFORM°990S is not in use, it can be
folded for compact storage. Refer to the drawing
below. Loosen the Lock Knob (36) on the dght side of
the frame. Slide the Handlebar Frame (2) into the
Frame (1) as far as it will go. "Rghten the Lock Knob.
Store the PROFORIVP990S indoors, away from
moisture and dust.
36
12

NOTES
13

PART LIST--Model No. 831.288300 R0497A
Key Part Key Part
No. Qty. No. Description No. Qty. No. Description
1 1 NSP Frame 34 2 134268 Wheel
2 1 NSP Seat Frame 35 2 134269 Wheel Bushing
3 1 134613 Idler Bmckdt- 36 1 134272 Lock Knob
4 1 134717 Idler Wheel 37 3 012149 3/8" Nylon Locknut
5 1 134546 Right Handlebar 35 4 012042 M8 Nylon Locknut
6 1 134545 Left Handlebar 39 1 106106 Extension Spdng
7 1 134258 Resistance Knob 40 1 013225 M5 Screw
8 1 134274 Realstance Dial Assembly 41 2 134534 Gdp
9 1 132699 Belt 42 2 134276 Stabilizer Endcap
10 2 134376 Handlebar Housing 43 4 133918 Handlebar Endcap
11 1 104345 Star Washer 44 1 134277 Seat Frame Bushing
12 2 134273 Fdction Pad 45 1 134278 Frame Bushing
13 1 134535 Long Carda_geBolt 46 2 137911 Seat Spacer
14 1 134377 Crank 47 1 134367 Right Pedal w/Strap
15 1 122896" PuHe_ 46 1 134368 Left Pedal w/Strap
16" 1 110465 Crank Beedng Assembly 49 1 134312 Idler Spdn_ ....
17 1 012150 M8 N_ 50 1 134602 Reed:S_-witchWire
18 2 014041 Washer 51 1 128348 Push Nut-
19 1 135425 Axle Bushing 52 2 134366 M8 x 60mm Bolt
20 2 136121 Star Washer 53 1 134535 Seat
21 2 133616 Seat Frame Endcap 54 1 134536 --Backrest
22 1 134268 Rywheel 55 4 121560 Seat Screw
23 2 014132 M10 Flat Washer 56 4 013468 1/4" x 5/8" Screw
24 1 134374 Left Side Shield 57 2 134316 wheel Screw
25 1 134375 Right Side Shield 58 1 134539 Seat Bracket
26 9 135426 M4 x 8mm Screw 59 2 137912 Seat Bracket Bolt
27 5 127597 Tree Fastener 60 4 014063 1/4" Rat Washer
28 1 134314 Flywheel Axle ,_ 1 134317 Magnet Bracket
29 1 132828 Console -6"2" 4 120001 1/4=x 9/16" Screw
30 1 134250' 'ELHtPedal Strap "63 1 134548. Ba_ Cover
31 1 134259 Right Pedal Strap 34 1 119222 Flywheel Spacer
32 1 013547 Idler Pivot Bolt #1 045004 Tool Set
33- 2 134267 wheel Hub #1 134550 User's Manual
Note: =*"Includesall parts shown In box. _indicates a non-illustratedparL Specifications are subject to change
without notice. See the back cover of thls manual for Informationabout ordedng replacement pads.
14

EXPLODED DRAWING--Model No. 831-,288300 R0497A
25
24
42
48
8
14
54
15
58
59
37
14
43 41
56
60
63
62
29
18
43 64
4_.joooO.o.
22 45
621
44 57
•35
34
15

Model No. 831.288300
QUESTIONS? "
If you fln.ddthat:
•you need help assembling or
operating the PROFORf_P 990S
• a part Is missing
•or you need to schedule repair
service
call our toll-free HELPLINE
1-800-736-6879
Monday-Saturday, 7 am-7 pm
Central Time (excluding holidays)
REPLACEMENT
PARTS
If parts become w@mand need to
be replaced, call the following
toU-free number
1-800-FON-PART
(1-800-366-7278)
The model number and sedai number of your PROFORMP 990S
are listedon a decal attached to the..fmme, See the front cover of
this manual to findthe location of the decal.
All replacement parts are available for Immediate purchase or
special order when you visit your nearest SEARS Sen/Ice Center.
To request service or to order pads by telephone, call the toll-free
numbem.listed at the left.
When requesting help or service, or ordering pads, please be
prepared to providethe following Information:
•The NAME OFTHE PRODUCT (PROFORM = 990S)
•The MODEL NUMBER OF THE PRODUCT (831.288300)
• The PA_MBER OFTHE PART (see page 14)
•The DESCRIPTION OFTHE PART (see page 14)
Part No;-134550 G00963.C-R0497V_ -Pdnted in Taiwan 04997 Sears, Roebuck and Co.