Pro-Lift C-9300 Instructions for use
Roller Chair
Creeper
Seat
Model
C-9300
Printed in China
C-9300-M0_092021
Capacity
300 lbs.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or property damage.
!
Operating Instructions & Parts Manual
SFA Companies, Inc.
10939 N. Pomona Ave.
Kansas City, MO 64153
Phone (816)891-6390, Fax (816)891-6599
WARNING: Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
2
SPECIFICATIONS
Model Rated Capacity Seat Height Creeper Length Creeper Width Net Weight Gross Weight
C-9300 300 lbs. 13-1/4" 25-1/4" 12-3/4" 12 lbs. 13 lbs.
WARNING: Do not use this device for any purpose other than that for which it is expressly intended.
Figure 1 - Model C-9300 Components
!
SAFETY AND GENERAL INFORMATION
For your safety, read, understand, and follow the information
provided with and on this folding creeper. The owner and
operator shall have an understanding of this product and
safe operating procedures before attempting to use. The
owner and operator shall be aware that use of this product
may require special skills and knowledge. Instructions and
safety information shall be conveyed in the operator’s native
language before use of this product is authorized. Make certain
that the operator thoroughly understands the inherent dangers
associated with the use and misuse of the product. If any doubt
exists as to the safe and proper use of this product, remove
from service immediately.
Inspect before each use. Do not use if there are broken,
bent, cracked or damaged parts (including labels). Any
folding creeper that appears damaged in any way, or operates
abnormally shall be removed from service immediately. If
the folding creeper has been subjected to a shock load (a
load dropped suddenly, unexpectedly upon it), immediately
discontinue use until it has been inspected by a Pro-Lift
authorized service center. It is recommended that an annual
inspection be done by qualified personnel. Labels and
Operator’s Manuals are available from manufacturer.
PRODUCT DESCRIPTION
This Roller Chair Creeper Seat is equipped with a slidable
chassis storage rack and two bottle racks for all of your car
cleaning supplies, allowing you to easily clean the wheels
without having to bend frequently to add pressure to the
back and knees.
Rated Capacity: One person (includes any tools, equipment,
personal items) weighing 300 lbs. or less.
Seat
Tool Tray
Rubber Caster
3
PREPARATION
Before assembling your Roller Chair Creeper Seat, make
sure all parts are present. If any part is missing or damaged,
do not attempt to assemble or use the product. Contact Pro-
Lift customer service for replacement parts.
MAINTENANCE
Little maintenance is required for this product. Wipe clean
as needed.
• NEVER add lubricant to casters!
• Periodically check that all of the fasteners are tight.
• Keep the seat clean. Wash it with a mild soap and dry
immediately.
STORAGE
When you are nished using the stool, store it in a safe place
where it will not disturb or hinder others.
ASSEMBLY INSTRUCTIONS
1. Attach both tool trays (#1) to stool (#6)
2. Attach both wheel assembly frames (#2) to stool using
(#3) screw and #4 washer, with (#4) washer and (#5) nut
as shown in illustration.
3. Ensure all hardware is fastened securely before using
this stool.
• Read, understand, and follow all instructions before operating this device.
• Do not exceed rated capacity. Rated capacity is 300 lbs. (includes user, tools, equipment and personal items).
• Sit down gently. Avoid shock loads caused by jumping or falling onto seat.
• Do not stand on seat.
• Keep out of the reach of children! This device is not appropriate for children’s use.
• Use on smooth, level surfaces only.
WARNING
!
ASSEMBLY PARTS LIST
Item Description Qty
1Tool Tray 2
2 Wheel assembly frame 2
3 M6 x 45 Screw 4
4 M6 washer 8
5M6 ange nut 4
6 Stool 1
4
ONE YEAR LIMITED WARRANTY
For a period of one (1) years from date of purchase, SFA Companies, Inc. will repair or replace, at its option, without
charge, any of its products, which fails due to a defect in material or workmanship under normal usage. This limited
warranty is a consumer's exclusive remedy.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight
prepaid, to SFA Companies, Inc., Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.
Except where such limitations and exclusions are specically prohibited by applicable law, (1) THE CONSUMER'S
SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS
AS DESCRIBED ABOVE. (2) SFA Companies, Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER,
AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION,
ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND
IS NOT COVERED BY THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply
to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have
other rights, which vary from state to state.
SFA Companies, Inc.
10939 N. Pomona Ave.
Kansas City, MO 64153
Phone (816)891-6390, Fax (816)891-6599
REPLACEMENT PARTS LIST
Item Part No. Description Qty
1 C-9300-1 Tool Tray 1
2 C-9300-2 Wheel Assembly 2
3 - M6 x 45 Screw 4
4 - M6 washer 8
5 - M6 ange nut 4
- C-9300-3 Hardware Kit
(contains #3 - 5) 1
