PRO SIGNAL PSG3031 User manual

PSG3031
HDMI SWITCH 2 PORT BI-DIRECTIONAL

WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
INSTALLATION
SPECIFICATIONS
• This device switches two HD sources to any one HD display or projector.
• Also it can distribute one HD source to two HD displays or projectors.
• Main unit.
• User’s Manual.
Please read these instructions carefully before use and retain for future reference.
• Please make sure all devices you wish to connect have been powered off.
• Connect the source device to the converter using appropriate HDMI cable.
• Connect the HDMI output to the displays.
• Two input sources to one output display or one input device to two output displays can
be connected.
• There is no requirement for power to this device but consequently a maximum total
cable length of 5m between source and display is recommended or quality may be
reduced.
• Power on the source and receiving devices.
• When the button is pressed the switched active HDMI port is indicated by the LED.
Operating environment 0-40o/ Storage -10 to 55o, Humidity up to 90%
Power supply Power free
Power consumption (max) 15mA
HDMI Input 1080p plug and play
HDMI Specication V1.0, V1.1, V1.2 and V1.3
Dimensions 42 x 50 x 25mm
Weight 35g
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.0