PROAIM CINEMA QR-ELMG-01 User manual

1
Electro Magnet Quick Release Mitchel Mount
(QR-ELMG-01)
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Mounng Plate Wrench
D-Type Cable
Baery Plate
with Clamp
Hard Case

2
Electro Magnet Setup
• Loose castle nut from top mount .
• Remove the boom mounng plate from
mounng plate by pulling buon of
mounng plate.
• Secure it by castle nut.
• Now aach it to airwave.
Airwave Ultra Assembly
• Unlock the connector holder (Not Included)
and press the buon the gimbal connector
(Not Included).
Vibraon Isolator with Dampener Assembly

3
• Mount Gimbal connector to boom
mounng plate.
• Here is how both apart would look like
(Not Included).
• Now secure it by using screw and Allen key.
• Aach the boom mounng plate aer
ipping to top mounng plate by pulling
buon.
• Use the provided pin to secure release
buon.
NOTE: so that whenever your rigs are
posioned beneath the magnet, nobody can
touch the buon release, making it highly
secure keeps the gadget in place even when
the baeries run out or lose power .

4
• Mount the connector holder on gimbal.
• Screw it with the help of Allen key
• Release the quick release plate from
gimbal by unlocking knob .
• Now aach the gimbal to the mounng
plate while pressing buons of connector
holder and secure by closing knob.
• Now unscrew the connector holder
to detach quick release plate(Not Included).
Air Filling Pump Assembly
Vibraon Isolator with Dampener Assembly

5
• Now aach camera with plate to gimbal
by sliding and close the knob back again.
• Here is the gimbal aached.
• Mount the baery plate on the airwave
and ghten the clamp to secure .
• Now loose lever lock to open clamp of
baery plate.
• Aach the quick release plate to camera
(Not Included) and secure it by the help of
Allen key (Not Included).
Air Filling Pump Assembly
Vibraon Isolator with Dampener Assembly

6
• Aach other end of D–type cable to
mounng plate .
• Now aach baery on the baery plate by
sliding.
• Turn switch on which is on the side of
baery plate .
• Aach one end of D-Type Cable to baery
plate.
Air Filling Pump Assembly
Vibraon Isolator with Dampener Assembly

7
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR PROAIM AIRWAVE ULTRA VIBRATION ISOLATOR ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)