PROAIM SnapRig Cage CG215 User manual

1
What’s In The Box
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim SnapRig Cage CG215 Top Handle
1 x 1/4"- 20 Screw
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Cage for Sony a7S III Top
Handle (CG215)

2
• Securely insert the camera (Not Included) in
the SnapRig cage. Align the Camera hole to
the screw hole at the boom of the cage and
insert the screw.
• Image showing top handle correctly aached
to the cage.
Camera Cage Setup
• Tighten the screw properly using a
screw-driver, ensuring the camera is well
secured in the cage.
• Aach the handle to the top mounng center
thread hole of the SnapRig cage, then ghten
it correctly using the handle knob.
NOTE: Removable ARRI rosee allows the top
handle to be oriented 360° forward and back.

3
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR PROAIM SNAPRIG CAGE FOR SONY A7S III WITH TOP HANDLE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)