PROAIM SR-016-00 User manual

Proaim Shoulder Mount Camera Stabilizer 1
Shoulder Mount Camera Stabilizer
(SR-016-00 )
I N S T R U C T I O N M A N U A L
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by
the applicable copyright statutes or in writing by the Publisher.
F o r d e m o n s t r a t i o n o n l y

Proaim Shoulder Mount Camera Stabilizer 2
INTRODUCTION
Proaim oers a new shoulder mount camera support rig created for steady, handheld shoong.
This modular shoulder mount can be used with many digital cameras including Sony F5/F55 and
Panasonic Lumix GH3/GH4/GH5. High-quality CNC aluminum constructed rig guarantees stability
and perfect balance. It oers so rubberized ARRI Rosee handle bar conguraon that provides
the most comfortable opon for long handheld shoong. It comes equipped with the most com-
fortable & stable shoulder support pad, and fast & secure quick release mounng system. It is a
comprehensive package for converng your camera to useful cinema producon rig.
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.
Quick Release Z-Bracket
Shoulder Support Pad
2 x 300mm Female Threaded Rods
2 x 200mm Female Threaded Rods
Rosee handle set
Counter Weight
 Aach quick release plate with your tripod mounng plate and ghten the screw with the help
of screw driver.
ASSEMBLING YOUR SHOULDER MOUNT CAMERA STABILIZER

Proaim Shoulder Mount Camera Stabilizer 3
 Then mount it on your tripod and
ghten the knob to secure it.
 Insert 200mm female threaded rods into the quick release plate and ghten the knob as
shown below.
 Insert your rosee handle set onto the
front of rod and ghten the boom
knob to secure it.

Proaim Shoulder Mount Camera Stabilizer 4
 Aach Z-Bracket to the back of the rods and then insert 300mm rods & Tighten it properly.
 Insert the shoulder Pad to the back of
the rods properly.
 Insert the counterweight onto the rods
and ghten the knob as shown below.

Proaim Shoulder Mount Camera Stabilizer 5
 Push the side pin and remove the top plate of quick release, then aach with your camera
and ghten it with the help of screw driver.
Side pin
 Mount your camera onto the quick release plate and ghten the knob.
YOUR PROAIM SHOULDER MOUNT CAMERA STABILIZER
ALL DRESSED UP AND GOOD TO GO
(SHOWN WITH OPTIONAL ACCESSORIES)

Proaim Shoulder Mount Camera Stabilizer 6
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import du-
es are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.