PROAIM MB-10 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
MB-10 Lightweight Clip-On Camera Matte Box
for 67mm - 82mm, 114mm Lenses (MB-10-01)
Assembly Manua l
Metal Frame with
Inbuilt Holder
15mm Rod Adapter
Carbon Fiber Top Flag
Rubber Hood
(OD-114) -(ID-67)mm
Ring Clamp
(OD-114) -(ID-72)mm
Ring Clamp
(OD-114) -(ID-77)mm
Ring Clamp
(OD-114) -(ID-82)mm
Ring Clamp
Lens Cleaning
Cloth
3mm Allen
Key

2
Aaching Filter with Metal Frame
If you want to attach the filter (Not Included)
press the button and insert filter
(Not Included) into the frame. Be sure your
filter is fitted properly.

Aach 15mm Rod adapter in the provided
metal frame knob connector and ghten the
knobs properly with the help of Allen key. You
can adjust the lense position movement
according to your requirement.
Next, aach your top ag into the metal
frame, you can adjust top ag movement of
the metal frame by loosen/tighten the knob
to secure the sections together.
Matte Box Setup
(OD-114) -(ID-67)mm ring clamp attached into
metal frame with inbuilt holder. You can
adjust the lens position movement according
to your requirement. Follow the same process
Remaining 3 rings clamps.
Ring Clamp Setup
Aaching Rubber Hood with Metal Frame
Note: The adapter which is attached to the
bottom of the metal frame knob is for
multi-purpose usage within different setups.
Note: You can fold the carbon fiber top flag
down to cover the front of your matte box and
lens and protect it from any debris, dirt, or dust
on the set.
Note: The matte box is designed to clamp onto a
114mm lens and comes with four adapter rings
for mounting on 67mm, 72mm, 77mm, and
82mm lenses.
Attach the rubber hood with metal frame
with inbuilt holder properly.

3
YOUR PROAIM MB-10-01 LIGHTWEIGHT CLIP-ON CAMERA MATTE BOX
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.