PROAIM P-OHCP-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
What’s In The Box
2 x Side Bars
3 Overhead Plaorm (P-OHCP-01)
2 x L-Brackets
1 x Camera Mount
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
1 x Cross Bar
2 x Foot Joints
8 x M5 Short Thumb Screws
4 x Support Bars
2 x Plasc Clips
9 x Foot Thumb Screws
2 x Locking Pins

2
• Similarly, Repeat Same Steps for aaching 2
feet.
• Assemble the Support Bar on the Side Bar
using the long M5 Short knob.
• Repeat this step for the other support bar
assembly, as shown in the image.
• Assemble the Support Bar on the foot using
the short M5 short knob.
3 Overhead Plaorm Setup
• Slide the Side Bar onto the ground foot. Lock
the Side Bar to the foot using of the 1/4-20
Foot thumbscrew.
Side Bar Assembly
Support Bar Assembly

3
• Adjust the height of the Cross Bar by sliding it
along the Side Bar and locking it into posion
using the 2 Height Adjustment Thumbscrew.
NOTE: Camera Plaorm slide on crossbar as per
your requirement.
• Aach the cross Bar with Side Bars as shown
in image.
NOTE: The Overhead Plaorm's crossbar is
up/down adjustable & easily mounts through
rosee knobs. The Camera Holder with a ¼"-20
screw can be locked into any posion on the
crossbar.
• Then locking it into posion using the 2
Height Adjustment Thumb screw.
• To make the cross bar extra secure, properly
secure it with the help of a pin.
• Slide the Camera Holder onto the Cross Bar.
Camera Mount Assembly
Cross Bar Assembly

4
• Aach the 2 L-brackets using the thumb
screws onto the cross bar.
• Both L-brackets is properly aached with
cross bar.
• Clamp your backdrop to the brackets using
the 2 clips.
NOTE: The backdrop & other Related
Accessories is not included with the Overhead
Camera Plaorm.
• You can adjust the height of the crossbar
according to your shoong needs. as shown
in image.
• Similarly. Follow the same process to secure
the cross bar to both sides.
L-Bracket Assembly

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR PROAIM 3FT OVERHEAD PLATFORM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)