PROAIM SL-ALPN-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manual
Alpine Vercal Tower Mitchell Camera Slider w Euro
Base (SL-ALPN-01)
Proaim Alpine Tower Slider
Mitchell Mount
Plate Weight Rod (Dia: 50mm)
with Weight Closer
Bag Packing
Weight Rod
(Dia:25mm)

2
 Loosen the bolt using the Allen key to attach
the Mitchel plate into the Alpine tower slider
and then remove the bolt.
 Now the Mitchell to the Euro adapter
(Not Included) has properly been secured over
the Cyrus pro Mitchell high-hat (Not Included),
as shown in the image.
Alpine Vercal Tower Mitchell Camera Slider Setup
 Attach the Mitchell mounting plate on the
tower slider plate and then insert the bolt by
aligning the thread, as shown in the image.
 To mount the Alpine Tower Slider over the
Euro Adapter (Not Included), loosen all the
knobs from bottom and then mount.
 Mount the Mitchell to Euro adapter
(Not Included) to Cyrus pro Mitchell high-hat
(Not Included) and then secure it from bottom
using the locking knob.
 After inserting the bolt on the Mitchell mount
plate, secure the bolt with the help of the
Allen key, as shown in the image.
Alpine Tower Mount on Cyrus Pro Mitchell Hi-Hat

3
 After mounting the Alpine Tower Slider, again
tighten the knob and properly secure it.
 Secure the Properly Alpine tower slider with
the ratchet knob. Then aach the bowl plate
(Not Included) to the Mitchell plate.
 Attach the bowl plate (Not Included) to the
Mitchell plate to mount the bowl’s fluid head
(Not Included) and then mount the camera on
the fluid head, as shown in the image.
 Attach the Mitchell’s fluid head (Not Included)
to the Mitchell plate.
NOTE: Its rugged design supports any camera/
uid head combinaon up to 22.6. Mulple
3/8"-16 threaded holes for mounng
accessories.
 Secure with the castle nut after mounting the
fluid head as shown in the image.
 To release the top plate of the fluid head,
press the side knob. Then match the camera’s
thread to the fluid head (Not Included) and
attach top plate of the fluid head to the
camera and then slide the camera to the fluid
head.

4
 Camera has been properly mounted on the
fluid head (Not Included).
NOTE: Alpine tower slider compable with
Mitchell Base to Bowl Adapter & Euro/Elemac
Base Adapter.
 As per the requirement of the setup, insert
the weight to the weight rod.
 After matching the alpine tower slider to the
mounting thread, insert the weight rod
(Dia: 25mm) into it and then properly secure
the rod.
 After matching the alpine tower slider’s
mounting thread with the weight rod, and
then insert the weight rod (Dia: 25mm) into it
and then properly secure the rod.
 You can set setup in steady motion.
NOTE: Alpine Tower Slider is a counterbalanced
elevaon tower that gives operators 26.7” of
smooth vercal movement as well as a
complete 360° of rotaon.
 Now setup is ready to use.

5
 Alpine Tower Slider is designed to work with
various camera plaorms like Heavy-duty
sliders, Doorway Dollies, Tripods, Pipe dollies,
Hi-hats, Bazookas, or any other plaorm with
an Elemac mounng base.
YOUR PROAIM ALPINE VERTICAL TOWER MITCHELL CAMERA SLIDER W EURO BASE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
 To properly secure the weight on the weight
rod, weight closer will be used.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.