PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Flymate Versale Camera Dolly with Universal
Track Ends (DL-FLMT-01)
Assembly Manua l
Central Support with Baby feet
Long Feet
100 mm
Bowl Base 150mm
Bowl Base
End Truss
Baby feet
Camera Plaorm
Mitchell Base
75mm
Conversion Ring

2
 Insert both the track rails (Not included) into
the end truss & ghten knobs properly.
Note: For reference, We have used an 8 rail
track (Not included) for the assembly purpose.
You must place the central support in the middle
for a longer track, as shown in the photo.
 Now aach long feet to the end truss and
ghten the knobs to secure them.
Flymate Versale Camera Dolly Setup
 Now, place the camera plaorm with a
150mm bowl aached to it onto the rail track.
The handle part of the camera plaorm
should be inside the rail track, as shown. Make
sure all wheels are aligned correctly on the
rails, so the camera plaorm runs smoothly.
 Mount the 100mm bowl onto the camera
plaorm and ghten it appropriately with the
help of a screw driver, as shown.
Mount Camera Plaorm with Bowl on the Track
Note: Assembly steps for 75mm/100mm/150mm Bowl are the same.

3
 For hi-hat mounng, aach the Hi-hat adap-
tors to the camera plaorm, then insert the
bolt to secure them.
 Aach the long feet to the Hi-hat adaptors
and ghten the knob to secure them togeth-
er, as shown in the image.
 Similarly, you can aach Mitchell base to the
camera plaorm, and secure it by ghtening
the bolt with the help of the Allen key.
 Similarly, you can aach the baby feet to the
Hi-hat adaptors and secure them by ghten-
ing the knob.
 Lastly, mount your camera setup onto the
uid head (Not included) and secure it
properly.

4
YOUR FLYMATE VERSATILE CAMERA DOLLY WITH UNIVERSAL TRACK ENDS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.