PROAIM P-CSHR-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Surfer Helmet Rig for DSLR Camera/
Smartphone (P-CSHR-01)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Arca-Type
Quick Release
2 x Camera Bolts
(Size : 1/4”)
2 x L-Type Allen Key
(Size : 4mm, 3mm)
Cam Surfer Helmet Rig
1/4” to 3/8” Converter
Screw BS-100
Weight washers-10 pcs I-Phone Adapter
What’s In The Box

2
Surfer Helmet Rig Setup
 Add washers according to the setup weight,
and then secure them by ghtening the
stopper knob.
 Insert the weight washer at the back of the
Helmet, as shown in the image.
 Remove the quick-release plate by loosening
its knob.
 Loosen and remove the weight stopper knob
on the back of the helmet rig.
 Aach the quick-release plate to the camera
plaorm knob and properly secure it in place.
 Aach the plate to the boom of your
camera (Not Included), and ghten it using a
screw driver.

3
 Mount the camera (Not Included) on the
quick-release plate and then secure it using
the provided knob.
 Loosen the center knob of the Helmet Rig
and set the posion according to your
requirement.
 Tighten the knob to secure the posion.
NOTE: Tighten the knob aer matching the
threads of the knob of the Helmet Rig to
properly secure it with opmal gripping.
 Loosen the knobs on either side of the
Helmet Rig and then posion can be set by
twisng the camera plaorm.
 To adjust the posion of the Helmet Rig,
loosen the buon head with the Allen key
and set the angle according to your setup
requirement.
 Aer seng the posion of Helmet Rig,
secure both the bolts by ghtening them
properly with the help of Allen key.
Posion Adjustment (Angle + Height)

4
 Aach your I-phone in I-Phone Adapter
holder.
 Secure the I-phone adapter holder by
aaching it properly to the knob on the
helmet's camera plaorm, as shown in the
image.
Smartphone Holder
Accessory Mounng Flexibility
Front, Top & Side Plates with 1/4"-20 Threads

5
YOUR PROAIM SURFER HELMET RIG FOR DSLR CAMERA /SMARTPHONE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.