PROAIM CINEMA Series User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Polaris Portable Camera Dolly with 8 Track
(DL-PLRS-4P)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Assemb ly Manua l
Polaris Dolly with 16 Wheels
75mm Bowl Adapter
4 x Foot
2 x Universal Track
Ends
Centre Support
4 x Track
Aluminum Pipes
100mm Bowl
Adapter Flight Case
5mm Allen
Key
Conversion Ring
An-Tilt Safety
Break

2
Funcons
Polaris dolly, designed for hassle-free
operaons and a smaller footprint, all
while delivering stability and safety.
Aluminum
Speed Rails
Dolly Plaorm
16 Wheels
Universal
Track Ends
Rail is an extruded system with low
weight and maximum strength to
support the dolly.
Ecient braking
system that keeps
the dolly stable in
one posion.
16-wheel design with oang
trucks and high-speed SS
bearings, which provide
smooth, quiet and
squeak-free movement.
An Tilt Safety
Break
Adjustable feet to
work on rough
surfaces with utmost
ease.
Foots
To achieve shots at
higher heights,

3
• Insert the foot in the provided holes of the
Universal Track Ends.
Centre Support Assembly
• Insert and ghten the remaining three feet in
the Track Ends, as shown in the image.
• To open the clamp of the Track Ends, loosen
its knob per your requirement.
• Now, insert a track rail into the clamp, as
shown in the image.
• Aer properly inserng the track rail into the
clamp, secure it by ghtening the knob.
• To form an 8 track aluminium rail, aach
two 4 rails.
• To mount the universal track end on a
C-Stand (Not Included), loosen the knob.
NOTE: To achieve shots at higher heights, one
can mount the track end on C-Stands
(Not Included).

4
• Place the Polaris dolly with a 75mm bowl
adapter onto the track.
NOTE: The handles of the dolly plaorm should
be inside the track, as shown in the image.
Furthermore, the dolly's wheels should be
properly aligned on the track for smooth dolly
movement.
• Aer mounng the track ends onto the
C-Stand (Not Included), ghten the provided
knob to secure the setup.
• The Dolly has an aached Mitchell mount
and a 75mm bowl adapter.
• To remove the aached Mitchell mount and
75mm bowl adapter, use the 5mm Allen key
to remove the bolts.
• Loosen the knob to open the safety brake.
• Mount the Safety Brake on the side of the
portable dolly plaorm.
• Adjust the posion of the bracket to prevent
the plaorm from lng.
• Aer mounng the safety brake, secure it
with a knob, as shown in the image.
Feature: It has an ecient braking system that
keeps the Dolly steady in one posion.
Safety Break Assembly
Bowl Adapters Setup
• Loosen the knob of the Centre support bar
and aach the bar below the track rail system
using a support Stand (Not Included).
NOTE: An 8 track assembling has been used
for assembly here. So, for a longer track, a cen-
ter support needs to be placed in the middle of
the track.

5
• The image shows the removed 75mm bowl
adapter.
• To aach the 100mm bowl adapter, loosen all
three aached bolts using the Allen key.
• Aer loosening the bolts, remove them, as
shown in the image.
• Mount the 100mm bowl adapter on the dolly
plaorm.
NOTE: The Dolly oers mulple mounng op-
ons, such as a Mitchell mount, 75mm and
100mm bowl adapters, an oponal 150mm
Mitchell bowl mount, and a cheese plate.
• Aer mounng the bowl adapter, insert three
bolts under the Dolly and secure them by
ghtening them using the Allen key.
• Loosen the locking knob of the 100mm Fluid
Head (Not Included) and insert it into the
bowl adapter through the screw.
100mm Fluid Head Assembly
• Aer mounng the uid head (Not Included)
on the bowl, secure it by inserng the
Conversion ring & locking knob from the
boom side of the Dolly.
NOTE: To prevent the 75mm or 100mm or any
other uid head from slipping through the dolly
plaorm's Centre hole, we use a conversion ring
to reduce the gaping of the hole size of the
dolly plaorm.

6
• Aer properly securing the Fluid Head
(Not Included) through the locking knob and
conversion ring, push the red ratchet knob to
remove the uid head’s camera plate.
• Aer removing the camera plate, aach it to
the boom of the camera (Not Included) and
ghten the bolts using the Allen key.
• Mount the camera (Not Included) onto the
Fluid Head (Not Included).
• The camera (Not Included) has now been
mounted on the Fluid Head (Not Included)
and fully secured with the help of the ratchet
knob.
Feature: It allows you to mount your camera
directly on the Dolly at oor level, & on a tripod,
giving your setup exibility.
Versale Mounng Opon
Versale Dolly oers mulple mounng opons, such as a Mitchell mount, 75mm and
100mm bowl adapters and an oponal 150mm Mitchell bowl mount, and a cheese plate.

7
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR PROAIM POLARIS PORTABLE CAMERA DOLLY WITH 8FT TRACK
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)