PROAIM P-WV-2PL User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
10' Wave-2 Jib Crane for Camer (P-WV-2PL)
Assembly Manua l
Wave-2 Plus Camera Jib Arm
With 100mm Bowl Adapter
Weight Bar
Weight Closer
Flat Base Plate
100 mm Bowl
75mm Conversion Ring
Storage Bag

2
Camera Jib Setup
Mount the central fork of the Jib arm to the 100mm bowl mount tripod (Not-Included) and attach the
bottom clamp for a secure connection.
NOTE: Ensure that the Central Fork is seated in the bowl properly, i.e., perpendicular to the tripod bowl.
Off-axis installation may hamper the jib movement. Also, you may need a grip stand to hold the camera
end of the arm during structure, preventing it from falling as it will be front-heavy. You may also require
the grip stand or assistance at the rear of the jib when mounting the camera.
NOTE: Tripod Stand is Not Included.
Unscrew the knob present on the back portion of the jib. Extend the jib arm length backwards. Retighten
the knob to secure properly.
Insert weight rod into the jib arm. Slide in the counterweights (Not-Included) as per your requirement.
Screw in the weight closer appropriately

3
Loosen the knobs of the Jib arm, extend the front telescopic post as per your requirement and tighten all
knobs to secure.
Mount your fluid head (Not Included) onto the 100mm bowl plate attached to the jib camera mount
and secure it with a locking adapter. Then, remove the tripod plate from it.
Securely attach tripod plate to the camera. Now mount the camera setup onto the fluid head (Not
Included) and secure it with the help of a provided knob.
Camera Mounng Setup
Loosen the bolts and remove the 100mm bowl.

•For an under-slung setup, attach the flat base plate to the bottom of the camera mount. Mount
the camera setup, and secure the camera properly.
4
LCD Mounting: Attach your LCD Mounting Arm to Jib Fork and secure it properly
Screw-in LCD (Not Included) to arm and tighten its knob after positioning the angle of LCD Arm.
•
Camera Weight
Counter Balance
1kg 2kg 3kg 4kg 5kg
2kg 4kg 6kg 8kg 10kg
Balancing Tips :
Lcd Mounting Setup

5
YOUR PROAIM 10’ WAVE-2 JIB CRANE FOR CAMERA
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.