PROAIM P-BKST-02 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Universal Backseat Monitor Control System
for In-Car Rigging (P-BKST-02)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.

2
Universal Backseat Setup
 Aer aaching the headrest, insert a bolt to
secure it properly.
 Insert two Stando pins into the Universal
headrest mount by matching them with the
threads of the Universal headrest, as shown in
the image.
 Aach the round cheese plate properly by
matching it with the threads of two stando
pins, and then insert the Allen bolt.
 Aer inserng the bolt, properly secure the
headrest on the backseat with the help of the
Allen key, and same step is to be followed on
the other side as well, as shown in the image.
 Aach the Universal headrest mount on the
back seat of the vehicle, as shown in the
image.
 Tighten the Allen Bolt with help of the Allen
key.
Note: Easily connect the headrest mount with
cheese plate which has mulple threads & holes
for quick & easy mounng.

3
Aer inserng the bolt, secure it properly
with the help of the Allen key and then in-
sert the rigging rod (4 Length) into it.
Aer inserng the rod, ghten the bolt with
the help of the Allen key. Then aach the 360°
Houdini speed rail rod clamp at the center of
the 4 length rod.
Then secure the bolt properly with the help of
the Allen Key and then insert the baby pin to
mount the monitor.
Insert the Rigging rod (4 Length) in both the
Houdini speed rail clamps and secure it by
properly ghtening the bolt, as shown in the
image.
Aach the Houdini speed rail clamp on
the round cheese plate and insert the bolt
into it.
Aer inserng the baby pin, secure it properly
with the help of the Allen key, as shown in the
image.

4
Aach the rigging road clamp to the round
cheese plate by matching it with the threads,
then secure it properly with the help of Allen
Key.
Then insert 360° Houdini Rod Clamp into the
Rigging Rod (180mm) and secure it properly
with the help of the Allen key, and then insert
rigging rod (250mm) into it.
Aer inserng the rigging rod (250mm), ght-
en it with the help of Allen Key. Then insert
the 360° Houdini rod clamp into it, as shown in
the image.
To secure the rigging road clamp, insert the
rigging road 180mm in it and secure it with the
help of Allen key.
Mount the monitor on the baby pin and se-
cure it properly by ghtening it with the help
of the knob.
Aer inserng the 360° Houdini Rod Clamp,
insert black anodized speed rail (3 length)
and secure it properly with the help of the
Allen key.

5
Note: It is enrely modular & adjustable. You
just need to set your control device, monitor,
LCD, wheels, and joyscks behind the front seat
in any desired posion and focus only on your
creave cinemac shots.
Black anodized speed rail (3 length) with
360° houdini rod clamp are properly secured,
as shown in the image.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM UNIVERSAL BACKSEAT MONITOR CONTROL SYSTEM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)