PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Top Plate
Dolly Base Leg
Rods
Compass 360° Photo Booth Rotang Camera
Plaorm (DL-CMPS-01)
4 (Size: 6x10mm Allen Buon)
5 (Size: 6x15mm Pan Phillips)
4mm Allen key
Ball Head

2
Compass 360° Camera Plaorm Setup
• Same as above, insert the second rod into the
other side of 360° rod adapter of dolly base
leg.
• Then properly insert all the Pan Phillips bolts
into the top plate and ghten them with the
help of a screwdriver.
• Tighten all the allen bolts properly with the
help of the Allen key.
• Insert the allen bolts to secure both the rods
with the dolly base leg.
• Insert the rod in 360° rod adapter of the Dolly
Base Leg.
• Place the top plate on 360° rod adapter, as
shown in the image.

3
• By placing the 2nd plate above the top plate,
insert the bolt and secure the plate properly.
• Both the plates are properly aached with
the dolly base leg.
• Adjustable angle rod can rotate up to an
angle of 60° .
• Insert the adjustable angle rod into the rod.
• Secure them properly with the help of the
Allen key and ghten the adjustable angle rod
knob properly.
• Remove all bolts of top plate properly with
the help of Allen key.

4
• Now aach the Ball Head to the mounng
part of the Adjustable angle rod and ghten it
manually.
NOTE: Ball head causes circular movements and
by loosening or ghtening the knob, you can
adjust its movement according to your needs.
• Then aach the Camera plate with the
camera (Not Included) and properly secure it
with the help of the screwdriver
• With the help of the other knob, you can
adjust the movement of the center ball.
• Place the camera (Not Included) by sliding it
over the ball head and ghten it with the help
of a knob.
• Remove the camera plate by loosening the
knob of the Ball Head.
center ball

5
YOUR PROAIM COMPASS 360° PHOTO BOOTH ROTATING CAMERA PLATFORM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
• Insert weights into the rod according to the
weight of the camera (Not Included).
• The setup is ready to use, as shown in the
image.