PROAIM Discovery SR-10 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Discovery SR-10 Comfortable Shoulder Mount
Camera Rig (SR-DVRY-10)
Assembly Manual
Shoulder plate with Shoulder Pad
Front Handle Set
Top Quick Release Camera
Mount
Lower Quick Dovetail Tripod
Plate

2
FUNCTIONS
Push Pin
Press to remove Quick Re-
lease camera mount from
shoulder plate.
Telescopic Handle Adjustment
For achieving the most comfortable
handle posion
Threaded Crossbar
 To accessorize the setup.
 It can be adjusted le/right on
the NATO standard rail, according
to your comfort.
Adjustable Shoulder
Pad
 Le/Right Mounng
 Comfortable
Shoong
Nato Rail Crossbar
Adjusts handles to le/right direcon
Rosee Arm
Widen or Narrow Handle Adjustment
Universal Dovetail Camera Plate
Core Unit with 15mm Rod Mounng
Lower Quick Dovetail Tripod Plate
Universal Quick Release
Camera Mount
To quickly aach/detach your
camera setup

3
Adjustment Features
 Loosen the height adjustment knobs to
extend the height of the telescopic handle as
per your requirement. Tighten the knobs
aer adjustment.
 Loosen the knob of the nato rail crossbar so
the handles adjust to the le/right desired
direcon.
Discovery Rig Setup
 Next, loosen the rosee points and rotate the
handles to narrow or widen the handle
posioning, as shown in the image.
 Loosen the knob present on the shoulder
mount plate. Slide the shoulder plate on the
Threaded Crossbar.
 Slide the quick release camera mount onto
the shoulder mount plate, and ghten it at
the needed posion.
 Adjust and x the plate on the desired
posion, and ghten the knob.

4
 Now mount your camera setup to the quick
release camera mount already aached to
the shoulder mount plate and ghten the
knob to secure, as shown in the image.
 Aach the universal dovetail camera plate to
your camera base and ghten it correctly.
 Loosen the knob & remove the universal
dovetail camera plate as shown in the image.
 Insert 15mm rods into the core unit, and
secure them with the provided knobs.
 If you want to mount your camera setup on a
tripod, there is no need to remove the enre
setup.
Note: You can remove the Universal dovetail
Camera Plate only and leave the Core Unit with
your rod pair behind, or you can remove the
Core Unit from the Lower Quick Dovetail.
 For mounng the setup on a tripod, you can
aach the lower quick dovetail to a tripod
plate, as shown in the images.
Note: The Lower Quick Release Dovetail has
1/4"-20 and 3/8"-16 threaded holes for
aaching to tripod plates or ARRI standard
bridge plates.

5
YOUR PROAIM DISCOVERY SR-10 COMFORTABLE SHOULDER MOUNT CAMERA RIG
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
 Aach the plates on the Tripod, and slide your
camera setup on it.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of
me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor
does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to
inspecon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling
in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our
company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.