PROAIM P-MC-FSN User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
1
Advanced Moon Control System (P-MC-FSN)
Assembly Manua l
4mm Allen key
3mm, 4mm
(L – type Allen Key)
(1 x Screw, washer)
Motor
3 Meter Wire
Remote Controller
Bag Packing
12v Adapter
(Extra) Aluminum
Bush
Adapter
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.

2
 Once the bush is inserted into the motor’s
hole, ghten the knob to secure it properly.
Note: Ensure that both the gears (Gold Gear &
Silver Gear) are correctly set as shown in the
image.
 Align and insert the aluminum bush into the
motor's hole.
Note: The aluminum bush comes aached with
the fusion dolly (Not included).
Moon Control System Setup
 Connect the 3-pin connector of the 3-meter
cable to the 3-pin connector of the motor ca-
ble.
 Connect the 5-pin connector of the 3-meter
cable to the 5-pin connector of the remote
controller for movement of the dolly.
 12v Adapter: Connect the 12V adapter cable
to the remote controller and press the re-
mote controller's power buon downwards.
Note: If you press the power buon of the re-
mote controller upwards, it will run from the
baery, and if you press downwards, it will run
on power.
You can Power the Remote Controller in 2 ways
1. 12v Adapter
2. Baery
Baery
Power

3
 To control the speed of the dolly, turn the
interval pause potenometer to the right and
le sides according to your requirement.
 Set the video mode on the remote controller
and turn the speed potenometer to the
right/le side as per your need.
Note: You can increase/decrease the speed of
the dolly as per your requirement with the
potenometer.
 Baery: Aach the baery (Not-Included) to
the remote controller and press the power
buon upwards.
Remote Controller Movement’s Mode
 Set the interval mode on the remote control-
ler.

4
YOUR PROAIM ADVANCED MOTION CONTROL SYSTEM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
 Set the loop mode on the remote controller
and move the speed potenometer meter to
the right/le to control the dolly speed con-
nuously.