PROAIM P-MC-FSN User manual

1
’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
--
Assembly Manual
4mm Allen key
Motor
3 Meter Wire
Remote Controller
Bag Packing
12v Adapter
(Extra) Aluminum
Bush Universal Adapter
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
2 x L-Type Allen Keys
(Size: 3mm , 4mm)
&
1 x Screw & Washer

2

  
1. Moon Control System Setup 3
2. Slider Dolly Setup 3
3. Support Wheel Assembly 4
4. Motor Assembly 4
5. Cable Assembly 4-7
6. Baery Assembly 7
7. Final Setup 8

3
• Aach the remaining Elasc Stoppers
(Not Included) to all the ends of the Track
(Not Included).
• Aach the Elasc Stopper (Not Included) to
the ends of the Track (Not Included) and
properly secure it, as shown in the image.
Moon Control System 
 Use the leveler at both ends to level
the Track.
 To use the Slider Dolly smoothly on the Track,
it's necessary to level it.
• Mount the Slider Dolly (Not Included) on the
Track.
Slider Dolly 
• Aer mounng the Slider Dolly(Not Included),
ghten the silver gear wheel using the 13mm
Spanner (Not Included).
 Remember that the Loop Mode will not
work without ghtening the Silver Gear Wheel.

4
• Insert the Motor into the Aluminum Bush and
ghten it using the knob, as shown in the
image.
The Aluminum Bush comes pre-aached
with the Fusion Dolly.

• Aach the Support Wheel (Not Included) to
the Slider Dolly and ghten the knob aer
inserng it, as shown in the image.
• Repeat the same process to aach the
remaining Safety Wheels.
 Ensure the Gears (Gold Gear and silver
Gear) are correctly set, as shown in the image.

• Connect the 3-meter cable's 3-pin connector
to the motor's 3-pin connector.


5
• Aach the second end of the power cable to
the universal adapter.
• Connect the 5-pin connector of the 3-meter
cable to the 5-pin connector of the remote
controller.
• Aach one end of the power cable to the 12V
adapter.
• Connect the other end of the 12V adapter to
the Remote Controller.
• Press the power buon on the Remote
Controller downward.
 If you press the power buon of the
Remote Controller upwards, it will run from the
baery, and if you press it downwards, it will
run on power.
You can Power the Remote Controller in 2 ways
12v Adapter
Baery

6
• Set the Video Mode on the remote controller
and adjust the direcon to le or right per
your requirements.
 You can increase or decrease the speed
of the Dolly per your requirement with the
potenometer.
’

  The mode lets you control your
manual moves with ease - dial the knob from 1
to 10 to adjust your speed.
 The mode sets a specic length,
distance, and pause me for your moves with
distance.
 The loop mode sets the camera to
automacally travel back and forth at speeds
from 1 to 10.

7
• Set the Loop Mode on the remote controller
and adjust the speed potenometer to the
right/le to control the dolly speed.
 Aach the safety wheel and elasc
stopper and ghten the Silver Gear Wheel to
enable the Loop Mode.
• Aach the baery (Not Included) to the
Remote Controller and press the power
buon upwards.

• Adjust the interval pause potenometer to
the right or le side per your requirement to
control the dolly speed.
• Now, select Interval Mode.
 You can select from ranges of 0.4 to
11.8" segments on the total length, and the
pause opon allows you to set breaks ranging
from 1 to 999 seconds.

8
We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.


