
2
Teleprompter Setup
To keep the Stand Plaorm in a stac posion
(non-movable), lock down the wheels using
the provided brakes.
Aach the main rod with a telescopic rod and
secure it by twisng them.
Now insert the main rod onto the Base
Plaorm and ghten bolts with the Allen
key's help.
If you want to extend the stand's height, you
can raise the 3rd secon using a speed crank
knob. Tighten the knob aer geng the
desired size.
If you further need to increase the height,
then loosen the bolt from the boom of the
telescopic rod, adjust as per the required
height and ghten the bolt to secure.
Loosen both the knobs of the iPad tray clamp
and adjust as per the required height.