probst UNIMOBIL UM 5274.0015 User manual

UNIMOBIL UM Laying Dolly
UM Basic Version
1
4272.0235
UNIMOBIL UM Laying Dolly
UM Basic Version
V1
Order-Number
4272.0235
Translation of original operating instructions
Operating Instructions
5274.0015
4274.0011
4274.0012
4274.0014
4274.0017

Bitte beachten Sie, dass das Produkt ohne vorliegende Betriebsanleitung in Landessprache nicht
eingesetzt / in Betrieb gesetzt werden darf. Sollten Sie mit der Lieferung des Produkts keine
Betriebsanleitung in Ihrer Landessprache erhalten haben, kontaktieren Sie uns bitte. In Länder der
EU / EFTA senden wir Ihnen diese kostenlos nach. Für Länder außerhalb der EU / EFTA erstellen wir
Ihnen gerne ein Angebot für eine Betriebsanleitung in Landessprache, falls die Übersetzung nicht
durch den Händler/Importeur organisiert werden kann.
Please note that the product may not be used / put into operation without these operating
instructions in the national language. If you did not receive operating instructions in your national
language with the delivery of the product, please contact us. In countries of the EU / EFTA we will
send them to you free of charge. For countries outside the EU / EFTA, we will be pleased to provide
you with an offer for an operating manual in the national language if the translation cannot be
organised by the dealer/importer.

Contents
20/06/18
2 / 42
1Contents
1Contents ................................................................................................................................................................. 2
2EC - Declaration of Conformity ............................................................................................................................. 3
3General.................................................................................................................................................................... 5
3.1 Authorized use ..........................................................................................................................................................5
3.2 Survey and construction ...........................................................................................................................................7
3.1 Technical data and version/module description..................................................................................................... 8
3.1.1 Basic version......................................................................................................................................................... 8
3.1.2 Load pick-up modules.......................................................................................................................................... 9
4Safety.....................................................................................................................................................................14
4.1 Safety symbols ........................................................................................................................................................14
4.2 Safety Marking ........................................................................................................................................................14
4.3 Definition skilled worker / specialist....................................................................................................................... 15
4.4 Personal safety requirements ................................................................................................................................ 15
4.5 Protective equipment ............................................................................................................................................. 15
4.6 Accident prevention................................................................................................................................................ 15
4.7 Function Control......................................................................................................................................................16
4.7.1 General ................................................................................................................................................................16
4.8 Safety procedures ...................................................................................................................................................16
4.8.1 General ................................................................................................................................................................16
4.8.2 Unauthorized transportations ........................................................................................................................... 17
4.8.3 Unauthorized alterations ................................................................................................................................... 17
5Installation and Operation ...................................................................................................................................18
5.1 Adjustments General...............................................................................................................................................18
5.2 Operation General.................................................................................................................................................. 20
5.3 Installation UM-VZ I................................................................................................................................................. 21
5.4 Installation UM- VPH ...............................................................................................................................................23
5.5 Installation UM- SM.................................................................................................................................................27
5.6 Installation UM- VS-SPEEDY....................................................................................................................................32
5.6.1 UM - VS-S (SPEEDY) with integrated Honda generator SE ...............................................................................37
6Operation ............................................................................................................................................................. 38
6.1 Working sequence ................................................................................................................................................. 38
7Maintenance and care .........................................................................................................................................40
7.1 Maintenance........................................................................................................................................................... 40
7.2 Suction Plates and Sealing Lips ..............................................................................................................................41
7.3 Repairs .....................................................................................................................................................................41
7.4 Safety procedures ...................................................................................................................................................41
8Hints to the identification plate.......................................................................................................................... 42
8.1 Hints to the renting/leasing of PROBST devices....................................................................................................42

EC - Declaration of Conformity
20/06/18
3 / 42
2EC - Declaration of Conformity
DESCRIPTION:
UNIMOBIL UM Laying Dolly
UM Basic Version
Manufacturer: Probst GmbH
Gottlieb-Daimler-Straße 6
D-71729 Erdmannhausen
[email protected] www.probst-handling.de
Complies with the following provisions applying to it
EC-machinery directive 2006/42/EC
Based on the following harmonized standards (in excerpts):
DIN EN ISO 12100
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010).
DIN EN ISO 13857
Safety of machinery ― Safety distances to prevent hazard zones being reached by upper and lower limbs
(ISO 13857:2008).
DIN EN 349
Minimum distance to avoid squeezing any parts of the body (ISO 13854).
DIN 45635-13
Measurement of airborne noise emitted by machines (displacement-, turbo- and jet-compressors).
Pos:1.9 / 02 Ko nformitätserkl ärung/Vaku um_DIN E N 1012-1 u. -2 @ 1\m od562_2. doc @ 5 411 @
DIN EN 1012-1 / DIN EN 1012-2
Compressors and vacuum pumps; Safety requirements part 1 and 2.

EC - Declaration of Conformity
20/06/18
4 / 42
DIN EN 60204-1 (IEC 60204-1)
Safety of machinery, electrical equipment of industrial machines. Part 1: General requirements.
2006/95/EC (Low voltage standard)
2004/108/EC (Electromagnetic compatibility)
DIN EN 55014-1 (IEC/CISPR 14-1)
Electromagnetic compatibility –Requirements for household appliances, electric tools, and similar apparatus.
Part 1: Emission.
DIN EN 55014-2 (IEC/CISPR 14-2)
Electromagnetic compatibility –Requirements for household appliances, electric tools, and similar apparatus.
Part 2: Immunity.
os:1.1 0 /02 Ko nformität serkläru ng/5 neu_A ngabe n z um Unt erzeic hner + Do kubev ollmäc htigter @ 0\mod55_2.d oc @ 5341 @
Authorized person for EC-dokumentation:
Name: J. Holderied
Address: Probst GmbH; Gottlieb-Daimler-Str. 6; D-71729 Erdmannhausen
Signature:
Erdmannhausen, 20.06.2018..........................................................................
(M. Probst, Managing director)

General
20/06/18
5 / 42
3General
3.1 Authorized use
The device " UNIMOBIL UM Laying Dolly" is a universal usable installation trolley for handling and laying concrete
& natural stone products in connection with different Probst equipment like e.g. VZ I, VPH, SM, VS-S
The carrying capacity of the device „ UNIMOBIL UM Laying Dolly2 amounts maximum 150 kg (330 lbs).
The carrying capacity is reduced when:
●suction plates with a lower carrying capacity (than 150 kg) are used.
●the Probst equipment VZ I (with a carrying capacity of 100 kg) is used, then is the maximum carrying capacity
of the UNIMOBIL UM Laying Dolly only 100 kg.
●using a suction plate with a carrying capacity of 200 kg, please note that the maximum carrying capacity of
the UNIMOBIL UM Laying Dolly is only 150 kg (and NOT 200 kg).
This device is series-produced equipped with the following elements:
●Supported by steering roller with a locking brake.
●Boom and handles are telescopic to adjust well to different weights and measures of the laying goods
(e.g. stone slabs).
●Gas spring with integrated brake with a control handle.
UNAUTHORIZED TRANSPORTIONS:
All unauthorized alterations of the device and the use of any self-made additional equipment
could cause danger and are therefore forbidden!!
The carrying capacity the device is not allowed to cross over.
All unauthorized transportations with the device are not allowed!
●Transportation of people and animals.
●Transportation of other loads and material than described in this manual.
●Transportation of non rectangular goods, because they could fall down (with the VZ I).
Prior to every operation the user must ensure that:
●the equipment is suited to the intended operation, the functioning and the working condition of
the equipment is examined, and the loads are suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
●The device is only designed for the use specified in this documentation.
●Every other use is not authorized and is forbidden!
●All relevant safety regulations, especially regulations of the declaration of conformity, and
additional local health and safety regulations have to be observed.

General
20/06/18
6 / 42
●The load (stone slabs) which is to be sucked and
transported, must have sufficient inherent stability,
otherwise there is risk of breakage when lifting!
●Stone slabs must not be bend when lifting - especially take
care with thin and large-sized stone slabs!
●Generally, the load (stones slab) is only to be sucked in the
middle, otherwise the load hangs diagonally under the
device and the load could break - especially when lifting
large stone slabs with a small suction plate.
●Standard suction plates are not suitable for the transport of
glass plates!
The use of this device is only permitted in proximity to the ground.
The Load must not be lifted above 1,8 m (70,8 inch)!
Only suction plates of the manufacturer PROBST shall be used!!!
Some suction plates which can be mounted to the device will reduce its carrying capacity.
The maximum load is indicated on each suction plate.
Use only suction plates which are approved for this device!
Do not exceed the maximum carrying capacity of the suction plates!!!
Danger: Load (stone slabs) will fall down!

General
20/06/18
7 / 42
3.2 Survey and construction
Basic version
Handle
(telescopical
adjustable)
Steering roller
with locking brake
Hand lever
(for lifting
the boom)
Boom (telescopic
adjustable)

General
20/06/18
8 / 42
3.1 Technical data and version/module description
3.1.1 Basic version

General
20/06/18
9 / 42
3.1.2 Load pick-up modules

General
20/06/18
10 / 42

General
20/06/18
11 / 42

General
20/06/18
12 / 42

General
20/06/18
13 / 42

Safety
20/06/18
14 / 42
4Safety
4.1 Safety symbols
Danger
Danger to life!
Identifies imminent hazard. If you do not avoid the hazard, death or severe injury will result.
Attention
Hazardous situation!
Identifies a potentially hazardous situation. If you do not avoid the situation, injury or damage
to property can result.
Prohibition
Prohibition!
Identifies imminent a prohibition. If you do not avoid the prohibition, death and severe injury,
or damage to property will result.
4.2 Safety Marking
WARNING SIGN
Symbol
Meaning
Order-No.:
Size:
It is not allowed to be under hanging loads. Danger to life!
2904.0210
2904.0209
2904.0204
30 mm
50 mm
80 mm
Do not lift any components off-centre (always in centre of gravity).
2904.0383
2904.0594
102x52 mm
65x33 mm
WARNING SIGN
Symbol
Meaning
Order-No.:
Size:
Danger of squeezing the hands.
2904.0221
2904.0220
2904.0107
30 mm
50 mm
80 mm
REGULATORY SIGN
Symbol
Meaning
Order-No.:
Size:
Read operating instructions before operating.
2904.0366
2904.0365
30x57 mm
50x95 mm

Safety
20/06/18
15 / 42
4.3 Definition skilled worker / specialist
Only skilled workers or specialists is it allowed to carry out the installation,- maintenance, - and repair work on
these device!
Skilled workers or specialists must have for the following points (if it
applies for these device), the necessary professional knowledge.
●for mechanic
●for hydraulics
●for pneumatics
●for electrics
4.4 Personal safety requirements
●Only qualified, authorized certificated
personal is allowed to operate the device
and all devices which are connected (lifting
equipment).
!
●Each operator must have read and
understood the operating instructions.
●The manual guiding is only allowed for
machines with handles.
!111
4.5 Protective equipment
The protective equipment must consist, according to
the safety regulations of the following parts:
●Protective clothing
●Safety gloves
●Safety shoes
4.6 Accident prevention
Danger
Prohibition
●The operating range have to be covered
for unauthorized persons, especially
children.
●The workplace have to be sufficiently
illuminated.
●The working with the device in case of
atmospheric editions under 37,5° F is
forbidden!
Because the goods could be fall down
caused by dampness or freezing.
Attention
Danger
●Take care handling wet, dirty and not
solidified components.
●Take care in case of thunderstorm!

Safety
20/06/18
16 / 42
4.7 Function Control
4.7.1 General
●Before using the device check the functions and the
working condition.
●Maintenance and lubrication are only permitted
when device is shut down!
●Do not use the device, until all faults which can
cause safety hazards are removed.
●If there are any cracks, splits or damaged parts on
any parts of the device, immediately stop using it.
●The operating instructions must be available at the
workplace every time.
●Do not remove the data-plates of the machine.
●Unrecognisable data-plates/type plares must be
replaced.
4.8 Safety procedures
4.8.1 General
Danger
Prohibition
Prohibition
●The use of the device is only permitted in
proximity to the ground. Do not swing it
over peoples heads.
●While using the device is the stay of
persons in the working area forbidden.
Except it is indispensable. Caused of the
way of using the device, e.g. if the device
must be leaded by hand.
●While using the device be sure that there
are no persons in the working area. Danger
to Life!
●The operator is not allowed to leave the
control unit as long as the device loaded
with load. The load must always be in the
range of vision of the operator.
●The manual guiding of is only allowed for
devices with handles.
Danger
Prohibition
●The device must never be subjected to a
force acting in a lateral direction due to
diagonal pulling.
●Do not use the device to jerk seized
products.
●Do not lift any components off-centre,
because that could fall down.
●The device should not be opened if the
opening path of the gripping arm is
blocked by a resistance (e.g. other
concrete blocks or the like)!
●The capacity and of the device is not
allowed to cross over.
●Avoid quick or jerky movements with
the device. E.g. caused through driving
fast over uneven grounds/site is
forbidden. Because the gripping good
could fall down.

Safety
20/06/18
17 / 42
4.8.2 Unauthorized transportations
Prohibition
All unauthorized transportations with the device are not allowed!
●Transportation of people and animals.
●Transportation of other loads and material than described in this manual.
●Transportation of non rectangular goods, because they could fall down (with the VZ I).
4.8.3 Unauthorized alterations
Prohibition
All unauthorized alterations of the device and the use of any self-made additional equipment
could cause danger and are therefore forbidden!!

Installation and Operation
20/06/18
18 / 42
5Installation and Operation
5.1 Adjustments General
The distance between the rubber tyres is adjustable. Open
and remove both rings bolts (see ).
Adjust the distance of the rubber tyres and retorque both ring
bolts again.
Fig. 1
Fig. 2
When working on uneven terrain, or when picking up larger loads, the overtunrning can be reduced as the
wheel width of is increased.
The length of the handle is telescopically adjustable. Open ring
screw.
Adjust the length of the handle and retorque the ring screws
again.
Fig. 3
Fig. 4
By pulling out the handgrip, the backload to be applied can be reduced at higher loads.

Installation and Operation
20/06/18
19 / 42
The length of the boom is telescopically adjustable.
Pull spring bolt a little out - then turn and release it.
Adjust the length of the boom.
To lock the boom, pull the spring bolt a little out, turn and
release it until it lock in position.
Fig. 5
Fig. 6