Procare eCare PC-7189 User manual

Power socket Open cover plate button Power button Buffing pads
Repairing pads and Cleaning pads Cleaning Fluid Repair fluid
Mini brush Power adapter
Product Information

Specifications
• Power Source: DC 12V 500mA
• Dimension: R160mm X H76mm
• Weight: 470 w/o Power Adapter
Accessories
• Buffing pads (One pair) (Pink)
• Repairing pads (One pair) (Yellow)
• Cleaning pads (One pair) (Blue)
• Cleaning fluid (20cc bottle)
• Repair fluid (10cc. bottle)
• Mini brush
• Power adapter
Caution
• Do not press the power button when no disc is placed inside the unit
• Refrain from operating the unit continuously for more than 30 minutes.
• Refrain from adding more than 2 drops of the repair fluid onto the repair
pads.
Make sure the power adapter is securely plugged to the main body’s power socket.
Step 1 • Buffing
Open the cover plate, place buffing pads (pink color) into the left and right
side of the mounting shaft Insert the disc, then press power button. The
process will stop automatically after 2 to 3 minutes, open the cover plate and
retrieve the disc to go to Step 2.
Step 2 • Repairing
Place the repair pads (yellow color) into the left and right side of the
mounting shaft Add 2 small drops of repair fluid (10cc bottle) on the right
side, close the cover plate and press the power button After the process
stops automatically, retrieve the disc to finish the process Always clean the
buffing pad (pink color) with the included mini brush after use to maintain op-
timal performance For deep scratch repair, repeat the procedure (Step 1&2)
until best results achieved If the results of disc repairing aren’t satisfactory,
repeat the procedure (Step 1&2) or replace the buffing and repair pads.
Step 3 • Cleaning
Open the cover plate, place cleaning pads (blue color) into the left and right
side of the mounting shaft. Add 2 small drops of cleaning fluid (20cc bottle)
on the right side, and then insert the disc. Then press power button After the
process stops automatically, retrieve the disc to finish the process If still not
satisfied with the result, repeat the procedure until best results achieved.
InstructionGeneral Information

Note
• This unit can return damaged disc back to readable and writable condition,
though it will not erase any physical scars or scratches present.
• During the repairing process, there maybe circular marks on the disc; this is
perfectly normal condition and will not damage the disc.
• If the disc is faulty due to its original production, this unit will not repair it.
• If the disc is scratched into the inner foil layer, this unit will not repair it.
• Working cycle (Buffing and Repairing): About 6 minutes.
• The whole set of the pads and fluids can be used for 50 times.