Producer's PRIDE CANOPY COOP User manual

Distributed by:
TRACTOR SUPPLY COMPANY
5401 VIRGINIA WAY
BRENTWOOD, TN 37027
For customer support, call: 1-888-376-9601
www.TractorSupply.com
MADE IN CHINA
Tools required for assembly (not included)
SKU# 1339494
ASSEMBLY INSTRUCTION - COOP
CANOPY COOP

Front door panel
Lower side panel
Nesting box panel
Middle side panel
Upper left side panel
PART# Description Drawing Qty.
1
2
3
4
6
1
2
3
4
5
1
2
1
2
1
1
2
7
Upper right side panel
Upper front panel
1
1
1
8Roof support rod
Back

Back roof panel
Front roof panel
Roof cover ridge
Steel tray
Roosting bar
PART# Description Drawing Qty.
9
12
13
14
11
3
10
111
15
16
17
18
19
20
21
22
23
Support rod for nesting box
Support frame for tray
Back board for nesting box
Left side board for nesting box
Right side board for nesting box
L-corner
Bottom board for nesting box
Box divider
Roof panel for nesting box
1
11
11
2
1
2
1
3
1
2
1
3
1
4X60 Tapping Screw
4X50 Tapping Screw
4X40 Tapping Screw
4X25 Tapping Screw
3.9x19 Cross Recessed Round Head Screw
24
25
26
27
30+2
23+2
10+1
6+1
9+1

STEP 1: Connect Front door panel(1) and Lower side panel (2) with tapping screw (23) as shown below.
STEP 2: Assemble the Nesting box panel(3) to Lower side panels(2) with tapping screw (23).
4
ASSEMBLY
1
23
2
2
3
23
Note: Please align the outside of the Front door panel and Lower side panel before tightening.
1. Place all parts in a clear area and arrange them on the ground in front of you.
2. Remove all packaging materials and place them back in the box. Do not dispose of the packaging
materials until assembly is complete.
3. Check for completeness and for any any transport damage.
4. Suggest at least 2 people to finish this assembly.
5. Must assemble this coop inside of the Shelter.
6. Keep the manual for furture use.
Notes:

STEP 3: Slide the Middle side panel(4)as shown below and secure with tapping screw(23).
5
ASSEMBLY
23
4
4
23
23 23
5
6
Up
Bottom
Note: Please make sure the Middle side panel(4) is in the right direction.
STEP 4: Slide the Upper left side panel(5) and Upper right side panel(6) as shown below and secure with tapping
screw(23).

STEP 5: Assemble the Upper front panel(7) to the Upper left side panel(5) &Upper right side panel(6) with tapping
STEP 6: Fix Roof support rod(8) to the Upper left side panel(5) &Upper right side panel(6) and secure with tapping
screw(23).
ASSEMBLY
6
23
7
8
23
screw(23).
5

ASSEMBLY
7
STEP 7: Put Back roof panel(9) onto the Upper left side panel(5) &Upper right side panel(6) and secure with tapping
STEP 8: Assemble the Roof cover ridge(11) to the Front roof panel & Back roof panel with tapping screw(26).
9
24
10
11
26
screw(24).
Fix Front roof panel(10) same way as above.

ASSEMBLY
8
STEP 9: Put Support rod for nesting box(12) onto the Nesting box panel(3) and secure with tapping screw (24).
STEP 10: Then assemble the nesting box area.
24 12
3
25
17
16
18
First assemble the Back board for nesting box(16), Right side board for nesting box(17) Left side board for nesting box(18)
together with L-corner(19) as shown below and secure with tapping screw(25).
Note: The support bar is placed in the direction as shown in below diagram. Please keep the same distance between the two
ends of the support bar.
19
25

ASSEMBLY
9
STEP 11: Fix Bottom board for nesting box(20) into position as shown below.
STEP 12: Insert 3 Dividers(21) into the grooves as shown below, then the nesting box is finished.
20
21

ASSEMBLY
10
STEP 13: Secure the assembled nesting box to the Nesting box panel(3) with tapping screw(24).
STEP 14: Place the Roof panel for nesting box(22) onto the Nesting box panel(3) and secure with tapping screw (27).
NOTE: Make sure all panels are locked into position.
17
24
27
3
3

STEP 15: Connect the assembled chicken coop with the shelter run and secure the panel of the shelter run with
ASSEMBLY
11
STEP 16: Insert the Roosting bar(15) between Middle side panel(4).
13
14
15
Nesting box panel(3) using tapping screw(25).
Place 2 Support frames for tray(13) into the assembled chicken coop.
Place 2 Steel trays(14) on the Support frames for tray(13) as shown in below.
25
The chicken coop is now ready for use!